Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Common solenoid coil used on many manufacturers pinball machines.
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
This is the battery holder used on late model Stern (1998 and newer) and S...
White non-wedge drop target common to most Data East, Sega, and new Stern pinball machines.
Pin-Buddy™ combo kit
Flipper coil with diode for solid state flipper systems.
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Pinball Event Tune-Up Kit
Pin-Buddy™ Game Saver Cantraption&tm 45°
USE 77-PCR
Data East / Sega/ Stern flipper coil
Hole guard - switch slot 1-1/4 inch
Glass corner protectors - Set of 2
Coil - solenoid flipper Stern no diode
Knocker/ kickback plunger assembly used in ball launch assembly 500-5477-01
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Data East/Sega/Stern 26-1200 solenoid coil with diode
Display power supply board Whitestar/SAM
MOSFET transistor driver N channel 100V - 0.07 ohm - 22A
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Data East/Sega/Stern solenoid coil 24-940 with diode on top (OT)
IC - 28 pin DIP NVRAM FM1608-120
Pin-Buddy™ Game Saver Cantraption™ 180°
USE 20-9247
1/4 inch core height coil stop with 3/8 inch on center mounting holes.
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
Late model Sega & post 2000 Stern pinball machines includes...
Standard pinball playfield Invisiglass.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
NVRAM replacement for 6116, 6264 RAM ICs
Dual opto transmitter board assembly with grommets.
Clear plastic playfield post or standoff is 1-1/16 inch. Replaced by 03-7542-13
Post screw hex#6 / 6-32 machine screw 2 inch long, steel zinc.
Black mylar cabinet pivot bolt cover disc for Sega and Stern pinball machi...
Clear tempered backglass for Sega/ Stern pinball machines measures 26 x 19 x 1/8 inch
Steel and nylon plunger assembly for VUK (Vertical UpKicker) assemblies
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
Coil stop used on Data East/Sega/Stern mechanisms.
1/4 inch hex spacer post - female/female 6-32 thread taps at bothe ends 3/4 inches long.
U213 PAL Integrated circuit for Sega and Stern games
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
Bracket - playfield pivot internal pin
Glass playfield bundle.
Stern Test Fixture I/O adapter board 500-6108-00
4 position membrane switch for Stern HARLEY DAVIDSON.
Flipper coil with diode for solid state flipper systems. Used on the f...
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° RED
This board is REPLACED by 520-6803-00
Mylar arch cover clear
Trough assembly - 4 ball Stern
Plastic spacer is 1 inch tall x 3/8 inch Outer Diameter and .166 inch Inner diameter.
