Stern GODZILLA PRO (Stern) Parts
The following parts are known to work in Stern GODZILLA PRO (Stern).
-
Trim playfield glass 20-3/8 x 1/2 inches
Trim playfield glass 20-3/8 x 1/2 inches Sega
Out Of Stock$12.99 -
Screw 6-32 x 1-3/16 inch spiral fin shank
#6-32 x 1-3/16 inch steel spiral fin shank screw used to secure pop bumper bra...
Out Of Stock$1.29 -
Yoke - metal with lip 535-5072-00
Metal yoke used in Data East, Sega, and Stern pop bumper assemblies.
In Stock$2.49 -
Node board CPU Stern SPIKE II 60hz
Node board CPU Stern SPIKE II 60hz
Out Of Stock$459.99 -
Hex spacer 1/4 inchf-f 6-32 x 3/4 inches
1/4 inch hex spacer post - female/female 6-32 thread taps at bothe ends 3/4 inches long.
Out Of Stock$2.99 -
Ball shooter housing Sega/ Stern
Ball shooter housing includes housing and two 280-5010-00 Oil-lite bushing...
In Stock$26.99 -
Spring - extension drop target reset
Drop target reset assembly assembly spring.
In Stock$0.99 -
Slingshot arm & tip assembly
Slingshot arm assembly for Stern, Sega, Data East and other games...
In Stock$11.99 -
Nyliner® 3/16 inch bearing 20-8790-1
Nyliner® bearing 3/16 inch. Equivalent to 20-8790-1
In Stock$0.99 -
Trim - plastic channel 26 inch top & side DE/Sega/Stern
Trim - plastic channel 26 inch top & side DE/Sega/Stern
In Stock$7.99 -
Plate - switch body protect
Protect plate for many sub-mini microswitch bodies.
In Stock$1.29 -
LED lamp #44 base white dual chip
LED lamp #44 base white dual chip
In Stock$1.99 -
Switch actuator right
End-of-stroke switch actuator arm for right side flipper assembly...
In Stock$4.99 -
Opto transmitter board SPIKE
Opto transmitter board SPIKE
Out Of Stock$12.99 -
Bubble level assembly Stern
Playfield bubble level with 6-1/2 degree markings
Out Of Stock$4.99 -
Coin door assembly Stern SPIKE System
Coin door assembly Stern SPIKE System
In Stock$219.99 -
LED display board - tri-color
LED display board Stern tri-color
In Stock$12.99 -
E-clip for 3/8 inch shaft - ball shooter rod
Fits shaft diameter of 3/8 inch with grove diameter of 5/16 inch.
For Reference -
Invisiglass playfield 21 x 43 x 3/16 inch standard
Standard pinball playfield Invisiglass.
In Stock$259.99 -
(Stern) Flipper base kit - right
Flipper base plate with self tapping screws for Stern pinball machines - right side...
In Stock$18.99 -
Yoke fiber
545-5609-00 fiber yoke used on many manufacturers' pop bumper units...
In Stock$1.29 -
Backbox panel Stern SPIKE 2 display/speaker
Backbox panel Stern SPIKE 2 display/speaker
In Stock$159.99 -
Switch actuator left
End-of-stroke switch actuator arm for left side flipper assembly.
In Stock$4.99 -
Opto board - Stern 4 bank
Stern 4 bank Opto Interrupter board assembly.
In Stock$109.99 -
Opto receiver board SPIKE
Opto receiver board SPIKE
In Stock$14.99 -
Main power supply Stern SPIKE
Main power supply Stern SPIKE
In Stock$189.99 -
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
In Stock$19.99 -
Switch - subminiature lever actuator 1.25 inch
Switch - subminiature lever actuator 1.25 inch
In Stock$7.99 -
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Pin-Buddy™ Game Saver Cantraption™ 45° RED
In Stock$19.99 -
LED lamp #555 base 6.3v white dual chip
LED lamp #555 base 6.3v white dual chip
In Stock$1.79 -
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
In Stock$2.99 -
Headphone accessory kit (Stern) SPIKE 2
Stern SPI headphone and audio jack interface accessory kit for Stern SPIKE 2 system games...
In Stock$119.99 -
Spindle stop - rubber tip adjustable
Flat tip bumper, threaded neoprene cap with spindle. Size: 10-32 th...
In Stock$5.99 -
Switch - subminiature lever actuator ball gate
Wire gate sub-miniature switch with flat lever.
In Stock$8.99 -
Hitch pin - hair pin clip
Hair pin shaped cotter pin secures cash box lids. Zinc plated .093" d...
In Stock$0.79 -
Flipper base kit - left
Flipper base kit - left 535-7275-01
In Stock$18.99 -
Backbox LCD display Stern SPIKE 2
Backbox LCD display Stern SPIKE 2
Out Of Stock$289.99 -
LED display board Stern single
LED display board Stern single
In Stock$6.49 -
Coil - flipper Stern no diode
Coil - New Stern flipper with NO DIODE. Reference: 090-5030-ND 03-...
In Stock$25.99 -
Plunger assembly 3.57 inch Stern
Steel and nylon plunger assembly replaces 515-5941-01
In Stock$21.99 -
LED Translite Frame (LCD) Spike 2 Black
LED Translite Frame (LCD) Spike 2 Black
Out Of Stock$199.99 -
Node board cabinet Stern SPIKE 2
Cabinet node board Stern SPIKE 2
Out Of Stock$199.99 -
Bill acceptor - USA $1/5/10/20 up-stacker
Bill acceptor - USA $1/5/10/20 up-stacker
In Stock$289.99 -
Coil sleeve - 2 - 3/16 inch x 1/2 inch
Coil sleeve - 2-3/16 inch long x 1/2 inch diameter. Replaced by 03-7066-5
For Reference -
Grill - speaker 7 inch; x 7 inch;
Black perforated speaker grill measures 7 inch x 7 inch
In Stock$6.99 -
Spinner target blank 1-1/4 x 1-1/2 inch
Spinner target blank 1-1/4 x 1-1/2 inch
In Stock$18.99 -
Head bolt 3/8-16 x 1-1/2 inch acorn head 5/8 inch
Head bolt 3/8-16 x 1-1/2 inch acorn head 5/8 inch
In Stock$2.04 -
Flipper rebuild kit Sega/Stern 2 left 1 right
Late model Sega & post 2000 Stern pinball machines includes...
In Stock$69.99 -
Flipper Assembly - Stern Right
Complete new right side Flipper Assembly fits most late model Stern and Sega games.
Out Of Stock$64.99 -
Spring - compression
Compression spring used in Stern pinball machines.
In Stock$0.49 -
Slide & pivot support bracket right
Slide & pivot support bracket right
In Stock$7.99 -
Screw 10-32 x 3/8
Screw #10-32 X 3/8" hex washer head swage
In Stock$0.39 -
Drop target Stern black .468 inch wide top
Drop target Stern black .468 inch wide rollover top
In Stock$3.49 -
Trough serial opto transmitter board Stern SPIKE
Trough serial opto transmitter board Stern SPIKE
In Stock$38.99 -
Plunger pop bumper
Coil plunger for pop bumper assembly. Reference: 530-5348-00 splun...
For Reference -
Foam target switch pad .625 x .44 x .1875 inch 20 Uncut Pads
Foam target switch pad .625 x .44 x .1875 inch -
In Stock$0.75 -
Tilt mechanism assembly
Universal swinging pendulum tilt mechanism
In Stock$21.99 -
Pushbutton assembly LED 'Start'
Pushbutton assembly LED 'Start'
In Stock$34.99 -
Spinner target blank 1 x 1-1/4 inch
Blank steel spinner target used on Data East / Sega / Stern, Capcom and others.
In Stock$9.99 -
Bracket - edge slide
Edge slide bracket used on Stern pinball machines
In Stock$9.99