NIP IT (Bally) Ball grabber assembly

Bally NIP IT Alligator ball grabber assembly bracket.

Reference:

• 1. E-184-276 Solenoid SECURED TO SOLENOID BRACKET BY
  4 Lock washer, External. .. M-1700
  4 Nut. ................ N-01032-2112
  4 Screw ............... LSPR-01032-1106
• 2. S-739-208 Pin, Link
• 3. Split Spacer NOT VISIBLE IN SKETCH ENCASES ITEM 2,
• 4. P-1973-299 Link (4 used)
• 5. S-739-207 Pin, Pivot
• 6. S-181-70 Pin. Connector Link (2 used)
• 7. R-111-40 Grommet (4 used) NOT VISIBLE IN SKETCH ENCASE ITEM 6, ABOVE
• 8. A-3573 Pivot Arm & Stud assembly. Cam & Stud assembly VISIBLE IN SKETCH..... A-3576-3
• 9. A-3576-2 Pivot Arm & Stud assembly on opposite side of assembly from item 8, above
• 10. S-2087 Roller (2 used)
• 11. P-7812 Bracket, pivot secured to solenoid bracket by
  4 Lockwasher. External ... M-17008
  4 Nut. ................ N-00832-2112
  4 Screw ............... LSPR-00832-1106
• 12. P-7810 Bracket, Solenoid
• 13. AS-982-892
  Bracket P-126-672
  Screw (2 used) .......... MSSR-00540-11
  Switch ................ ASW-A2024
  Switch Plate. ........... P-137-5
  SECURED BY SAME FASTENERS WHICH SECURE SOLENOID above. ... M-1481-42
• 14. P-7811 carriage
• 15. A-3571 bearing bracket & stud (2 used) EACH SECURED TO CARRIAGE BY 3 OF EACH FASTENER WHICH SECURES ITEM 11, ABOVE
• 16. A-3572 grab arm bracket & hub VISIBLE IN SKETCH.
• 17. A-3572-1 grab arm bracket & hub assembly ON OPPOSITE SlDE OF ASSY. FROM ITEM 16, ABOVE
• 18. 5-231-787 bushing, nylon
• 19. SP-256 spring, torsion
• 20. SP-100-306 spring. extension NOT VISIBLE IN SKETCH ATTACHED TO UNDER SlDE OF ITEM 14, ABOVE
  Pin, guide (2 used)
• 21. S-739-196
• 22. A-3573 cam & stud
• 23. M-1597 ball grab arm SECURED TO ITEMS 16.17 ABOVE BY
  2 Lockwasher, split. M-1705-6
  2 Screw, Torq patch, hexagon head. slotted 6-32 x 3/8
  • 24. A-3570 mounting bracket & stud SECURED TO SOLENOID BRACKET BY MEANS USED TO SECURE ITEM 11. ABOVE
    
  • 25. R-231-14 plug bumper (6 used)
  • 26. P-6665-326 bracket. Mounting (2 used) SECURED TO ITEM 24, ABOVE BY MEANS USED TO SECURE ITEM 11, ABOVE
  • 27. R-111-7 grommet (4 used)
  • 28. S-231-658 bushing (4 used) NOT VISIBLE IN SKETCH INSIDE OF ITEM 27, ABOVE

    Miscellaneous components not all visible in sketch:
    C-537-3 Nyliner (6 used).
    retaining ring IDENTIFIED BY DIAMETER OF SHAFT FOR WHICH EACH RING IS DESIGNED
    3/32 in. (1 used). ........ P-6316-1
    1/8 in. (1 used). ......... P-2891-2
    3/16 in. (18 used) ....... P-6316-4
    1/4 in. (2 used). ......... P-6316-6
    Washer
    5/B in. dia. (2 used) ......... P-801-514
    11/16 In. dia. (2 used). ...... P-801-581
    Plain (4 used). ............. PW-008-12