Bally TWILIGHT ZONE Parts
The following parts are known to work in Bally TWILIGHT ZONE.
-
Plug - AC 110 volt power
Heavy duty 3 prong grounded 15 amp 110v AC power cord replacement plug
In Stock$6.99 -
Ring and rod
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
In Stock$6.99 -
Capacitor 15000 uF 25v radial
Capacitor 15,000 mf 25 volts. Suitable replacement for 5040-12313-00.
In Stock$6.99 -
Leaf switch - slingshot normally open
Slingshot switch used on many brands of electronic pinball machine kicker. Replaces SW-1A-114.
In Stock$6.99 -
Plate - strike
Stike plate used in Bally/Williams pinball machines...
In Stock$7.49 -
TWILIGHT ZONE (Bally) ball guide
Bally TWILIGHT ZONE ball guide. Reference: 01-11518
In Stock$7.49 -
Bracket - speaker panel latch
Bracket - speaker panel latch
In Stock$7.49 -
TWILIGHT ZONE (Bally) Gumball blade
Bally TWILIGHT ZONE clear plastic guide blade. Used inside the gumball ma...
In Stock$7.49 -
Latch - toggle back box
Back box toggle latch 20-9347 or tension latch
In Stock$7.49 -
TWILIGHT ZONE (Bally) Plastic
TWILIGHT ZONE (Bally) pinball machine playfield plastic.
In Stock$7.49 -
TWILIGHT ZONE (Bally) Plastic
TWILIGHT ZONE (Bally) Plastic
In Stock$7.15 -
TWILIGHT ZONE (Bally) playfield plastic
TWILIGHT ZONE (Bally) pinball machine playfield plastic. Reference:...
In Stock$7.00 -
Switch sub-mini assembly
Sub miniature snap action switch with 3 terminals and custom wireform actuator
In Stock$7.49 -
Connector - IDC orange 13 position
13 position Insulation Displacement Connector (IDC).
In Stock$7.49 -
Coil stop - Williams/Bally
Williams/Bally coil stop assembly with 3/8" centerline mounting holes.
In Stock$7.49 -
Switch - End Of Stroke - Normally Open
This is a flipper unit END OF STROKE (EOS) switch used on Williams / Bally...
In Stock$7.49 -
Latch support
Latch Support is used in the following games: Bally CREATURE FROM THE...
In Stock$7.99 -
TWILIGHT ZONE (Bally) Flap ramp
TWILIGHT ZONE (Bally) Flap ramp
Out Of Stock$7.99 -
Trim - playfield 23" wide-body notched
Rear 23" black plastic playfield glass TRIM MOLDING with notch used on pinball Bally / Williams machines
In Stock$7.99 -
TWILIGHT ZONE (Bally) Plastic
TWILIGHT ZONE (Bally) Plastic
In Stock$7.55 -
IC - 8 pin DIP MC3340P attenuator
IC - 8 pin DIP MC3340P attenuator
In Stock$7.99 -
Switch miniature 1-3/4 inch lever with hook
Miniature microswitch switch with 1-3/4" flat actuator.
In Stock$7.99 -
TWILIGHT ZONE (Bally) Playfield plastic
TWILIGHT ZONE (Bally) Playfield plastic
Out Of Stock$7.95 -
Opto assembly - IR LED Transmitter WHITE
Infrared Transmitter assembly in the white plastic housing.
In Stock$7.99 -
Opto assembly - IR Receiver BLACK
Infrared receiver assembly in the black plastic housing.
In Stock$7.99 -
Pop bumper bracket 04-10888
Pop bumper bracket used on Williams / Bally machines and other brands.
In Stock$7.99 -
IC - 24 pin DIP 16 input to 1 decoder
IC - 24 pin DIP 16 input to 1 decoder
In Stock$7.99 -
TWILIGHT ZONE (Bally) Promo coaster
Bally TWILIGHT ZONE speaker cutout promotional coaster with Twilight Zone...
Out Of Stock$7.99 -
Leaf switch - tilt weighted blade
Leaf switch - tilt weighted blade
For Reference -
ramp guard - right side
guard-ramp right side
For Reference -
Bracket - coil
Bracket - coil.
In Stock$8.49 -
Bumper post #10
Metal bumper post #10
In Stock$8.49 -
Crank arm - small
Bookcase small crank arm for Bally ADDAMS FAMILY pinball machine.
In Stock$8.49 -
TWILIGHT ZONE (Bally) Pop bumper cap set
TWILIGHT ZONE (Bally) Pop bumper cap set
In Stock$8.45 -
Bracket switch
Bracket switch
For Reference -
Leg bolt plate (Williams)
High quality steel plate replaces Bally / Williams part #01-11400-1
In Stock$8.99 -
Cashbox nest bracket
Cashbox nest bracket Williams
In Stock$8.99 -
Lamp #44 miniature - 10-pack
Ten-bulb box of #44 high quality miniature incandescent lamps.
In Stock$8.99 -
Switch - sub-miniature 3 inch flat lever
A universal snap action sub-microswitch with flat blade lever
In Stock$8.99 -
IC - 8 pin DIP EE Prom pot X9503
Integrated circuit ee prom potentiometer X9503 is an 8 pin DIP
In Stock$8.99 -
IC - 24 pin DIP Static RAM 6116LP XO-928
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Out Of Stock$8.99 -
Switch subminiature with bracket
Sub-miniature switch with wire actuator, diode and bracket assembly...
In Stock$8.99 -
Rollover switch & bracket assembly
Rollover switch assembly. Includes bracket and sub miniature snap action...
In Stock$8.99 -
Target Switch - round yellow front mount
Stationary target, front mounting bracket, round Yellow Reference:...
In Stock$8.99 -
Target switch - green oblong
Williams / Bally Green Oblong Stand up Target with front mount bracket. Replaced by A-18530-2
For Reference -
Target switch - Yellow flat side
Replaced by A-18530-6
For Reference -
cashbox sub assy parts
cashbox sub assy parts
In Stock$8.99 -
Target switch - oblong green
Williams / Bally Green Oblong stationary Target switch with front mount br...
In Stock$8.95 -
Wire form & bracket assembly
Wire form & bracket assembly. Reference: A-8645
For Reference -
TWILIGHT ZONE (Bally) Eddy sensor cable
TWILIGHT ZONE (Bally) Eddy sensor cable
For Reference -
Leaf switch - kicker
Leaf switch - kicker
For Reference -
IC - 8 pin DIP Proximity sensor
IC - 8 pin DIP Proximity sensor. Replaces 5370-13452-00
In Stock$8.99 -
Fish paper display shield dot matrix Williams
Dot Matrix Display fish paper rear shield for WPC-95 games.
In Stock$9.99 -
Plate - spacer cabinet slide
Plate - spacer pinball machine cabinet slide. Reference: 01-11408
In Stock$9.99 -
Actuator service switch - yellow
Safety switch bypass device for servicing Bally/Williams WPC System games.
In Stock$9.99 -
Bracket-kicker mtg
Bracket-kicker mtg
In Stock$9.99 -
TWILIGHT ZONE (Bally) Backbox tech chart
TWILIGHT ZONE (Bally) Backbox tech chart
In Stock$9.99 -
Ball shooter rod - black
Universal Ball Shooter rod with black plastic knob. Used on all Williams /...
In Stock$9.99 -
TWILIGHT ZONE (Bally) Clock decal
Twilight zone clock decal
In Stock$9.95 -
TWILIGHT ZONE (Bally) Clock decal white
Bally TWILIGHT ZONE white face prototype clock decal.
In Stock$9.99