Bally TWILIGHT ZONE Parts
The following parts are known to work in Bally TWILIGHT ZONE.
-
Plunger
Plunger Reference: 02-4241
In Stock$4.99 -
TWILIGHT ZONE (Bally) drive pin
This drive pin is part of A-16653 shaft and roll pin assembly in the Twili...
In Stock$4.99 -
TWILIGHT ZONE (Bally) gear shaft
Bally TWILIGHT ZONE gear shaft. Reference: 02-4715
In Stock$4.99 -
post
post
In Stock$4.99 -
Trim side channel - 17 inch glass edge
Williams/Bally WPC pinball machine backglass side trim 17 inch long.
In Stock$4.99 -
bushing - strain relief
bushing - strain relief
In Stock$4.99 -
TWILIGHT ZONE (Bally) Plastic lens
Bally TWILIGHT ZONE pinball machine plastic lens.
In Stock$4.99 -
Lamp #86 Miniature - 10-pack Clock
Ten-bulb box of #86 high quality miniature lamps.
In Stock$4.99 -
Wire ball guide rail 2"
Wire ball guide rail 2"
Out Of Stock$4.99 -
TWILIGHT ZONE (Bally) Made in USA Decal
TWILIGHT ZONE (Bally) Made in USA Decal
In Stock$4.99 -
TWILIGHT ZONE (Bally) Plastic
plfd plastic-twilight zone
Out Of Stock$4.99 -
Switch - sub-miniature wire actuator
Sub miniature snap action switch with 3 terminals and custom wireform actuator.
In Stock$4.99 -
Heat sink bridge rectifier
Heat sink bridge rectifier
Out Of Stock$4.99 -
AC power inlet IEC
AC power inlet IEC
In Stock$4.99 -
Lamp socket & #44 bulb with diode USE A-17807
Lamp socket & #44 bulb with diode USE A-17807
For Reference -
8-32 stud plate assembly
8-32 stud plate assembly. Reference: A-12258-2
Out Of Stock$4.99 -
Plunger and link 2-1/8 inch
Williams plunger and link assembly with 2-1/8 inch long plunger
In Stock$4.99 -
Lock and cam - 7/8 inch keyed-alike
Standard keyed-alike single bit 7/8 inch long barrel lock with chrome bezel fi...
In Stock$4.99 -
TWILIGHT ZONE (Bally) Key fob
Bally TWILIGHT ZONE pinball machine playfield plastic key fob
In Stock$4.99 -
TWILIGHT ZONE (Bally) Key fob
TWILIGHT ZONE (Bally) Key fob
In Stock$4.99 -
Post spacer #8 x 1 inch
Post spacer #8 x 1 inch
In Stock$5.49 -
Plunger
plunger
In Stock$5.49 -
Switch - sub-miniature 4" wire lever
Universal snap action submicroswitch with 4 inch wire actuator that can be formed to various shapes.
In Stock$5.49 -
Plumb bob - casting
Common tilt plumb bob with 0.15 inch interior diameter for rod.
In Stock$5.49 -
Lamp socket pop-bumper straight-wire
This is the standard pop bumper socket with solid flat 4" leads used in all Bal...
In Stock$5.49 -
Socket IC PLCC 84 pin
Socket IC PLCC 84 pin
In Stock$5.49 -
TWILIGHT ZONE (Bally) Lamp 3 PCB
TWILIGHT ZONE (Bally) Lamp 3 PCB
For Reference -
Lock and cam - 5/8 inch keyed-alike BLACK
Black lock with one key, lock washer, 1inch cam, and screw. Used for b...
In Stock$5.49 -
Target switch L bracket 95° red
Target switch L bracket 95° red
In Stock$5.99 -
Bracket wire mtg
Bracket wire mtg
In Stock$5.99 -
Bracket - microswitch 5/32 inch mounting holes
Bracket - microswitch 5/32 inch mounting holes
In Stock$5.99 -
Screen - Speaker / vent 7
Dark gray perforated plastic vent screen
In Stock$5.99 -
TWILIGHT ZONE (Bally) Gear cluster
TWILIGHT ZONE (Bally) Gear cluster
In Stock$5.99 -
TWILIGHT ZONE (Bally) Gear cluster
TWILIGHT ZONE (Bally) Gear cluster 32/32-32/11
In Stock$5.99 -
TWILIGHT ZONE (Bally) Gear cluster
TWILIGHT ZONE (Bally) Gear cluster
In Stock$5.99 -
Flipper & shaft - 2" yellow
One piece 2 inch small round tip molded yellow flipper with shaft
In Stock$5.99 -
Torx® wrench key T-25 tamper resistant
Torx® wrench key T-25 tamper resistant
In Stock$5.99 -
Bubble level vial Williams
Bubble level vial commonly used in Williams / Bally pinball machines...
In Stock$5.99 -
Foam rubber protector 3/4" wide x 22-1/8" long x 1/4" thick
22-1/8 inch long foam rubber protector for widebody pinball machine front trim moldings.
In Stock$5.99 -
Yoke metal - pop bumper substitute 01-5492
Yoke metal - pop bumper substitute 01-5492
For Reference -
Opto sensor - flipper - 5 leg
Opto transmitter & receiver packaged in U-shaped black plastic housing.
Out Of Stock$5.99 -
Switch sub-mini assembly blade
Sub miniature snap action switch with 3 terminals and custom wireform.
In Stock$5.99 -
Heatsink 6030b
Heatsink TO-220 transistors 6030B PB1-36CB
In Stock$5.99 -
Plunger & link - slingshot assembly 2 inch
Plunger and link assembly for many Williams/Bally and other manufacturer p...
In Stock$5.99 -
Chime plunger Williams 2-1/2"
Williams coil plunger for electromechanical chimes. Total length 2-1/2"...
In Stock$5.99 -
Cable - knocker Bally/Williams
Knocker cable Bally/Williams
In Stock$5.99 -
Torx® wrench key T-20 tamper resistant
Special tamper resistant long arm Torx® key for size T-20
In Stock$6.29 -
Trim side channel - 27 inch translite top
Williams/Bally backglass trim. For games that use translites.
In Stock$6.49 -
Lamp #906 Miniature - 10-pack
Ten-bulb box of #906 High quality miniature incandescent lamp. May be replaced with 05-906W LED or 04-0912 bulbs.
In Stock$6.49 -
Switch sub-mini assembly
Sub miniature snap action switch with 3 terminals and custom wireform. Use 12-SMSB and trim actuator as needed.
For Reference -
Diverter plunger and spring 2-1/16 inch
Diverter plunger and spring 2-1/16 inch
In Stock$6.49 -
Opto IR Receiver board
Williams/Bally opto InfraRed receiver board used in LED assembly A-16909...
In Stock$6.49 -
Leaf switch - kicker
Switch - kicker.
In Stock$6.49 -
Bracket - cashbox lock
Bracket - cashbox lock
In Stock$6.99 -
TWILIGHT ZONE (Bally) Bracket ball trap
TWILIGHT ZONE (Bally) Bracket ball trap
In Stock$6.99 -
Latch - backbox and insert board
Latch - backbox and insert board
In Stock$6.99 -
Lift Trim - 27 inch x 1/8 Inch Backglass
27 inch long Black Plastic LIFT TRIM used on the bottom of the backglass.
In Stock$6.99 -
Lift trim plastic - backglass 30 inch
Standard backglass lift trim with 3/16 inch channel. Trim as needed. Used in...
For Reference -
TWILIGHT ZONE (Bally) Plastic
TWILIGHT ZONE (Bally) Plastic
For Reference -
TWILIGHT ZONE (Bally) Plastic
TWILIGHT ZONE (Bally) Plastic
For Reference