Bally TWILIGHT ZONE Parts
The following parts are known to work in Bally TWILIGHT ZONE.
-
4R MT/END 22/100
4R MT/END 22/100
In Stock$0.59 -
Flipper opto switch assy
Replacement flipper Opto board assembly. Replaced by A-17316-GLM
For Reference -
.100 inch 12 Positon Male Header
.100 inch 12 Position male molex header. Reference: Williams 5791-12461...
In Stock$1.29 -
TWILIGHT ZONE (Bally) Gumball adapter
Nylon drive adapter used in Bally TWILIGHT ZONE gumball machine assembly
Out Of Stock$14.99 -
Torx® wrench key T-25 tamper resistant
Torx® wrench key T-25 tamper resistant
In Stock$5.99 -
Resistor 120 ohm 5w 5% USE R5W120
Resistor 120 ohm 5w 5%. Replaced by R5W120
For Reference -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. measured at the o...
For Reference -
TWILIGHT ZONE (Bally) Plastic
TWILIGHT ZONE (Bally) pinball machine playfield plastic. Reference:...
In Stock$1.50 -
Nut 3/4-16 jam
nut 3/4-16 jam
In Stock$1.29 -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. Replaced by 20-8712-43
For Reference -
TWILIGHT ZONE (Bally) main chute assy
TWILIGHT ZONE (Bally) main chute assy
For Reference -
Dot Matrix 128 x 32 LED display
New 128 x 32 LED Dot Matrix Display module for pinball machines
Out Of Stock$329.99