Williams TAXI Parts
The following parts are known to work in Williams TAXI.
-
Ball 1-1/16 inch standard pinball
Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
In Stock$2.99 -
Ball 1-1/16 in, Standard Pinball, 5-Pack Tube
Standard carbon steel 1-1/16" diameter, 80 gram pinball
In Stock$9.99 -
Spring - barrel ball shooter outer
Barrel shaped, bright finish shooter spring used on many brand...
In Stock$0.69 -
Leg bolt 3/8-16 x 2-1/2 inch acorn head 5/8 inch
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
In Stock$1.99 -
Coil - flipper red
3 terminal, dual winding flipper coil is used on the following games:...
In Stock$21.99 -
Glass playfield 21 x 43 x 3/16 inch standard
Standard pinball playfield tempered glass.
In Stock$99.99 -
Coil sleeve - 1-3/4 x 1/2 inch
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
In Stock$0.99 -
Flipper rebuild kit Williams 1988-1991
Designed for non-Fliptronic® 2/1988 - 8/1991 Williams and Bally machines...
Out Of Stock$33.99 -
Switch - flipper cabinet normally open
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
In Stock$9.99 -
Lamp #555 miniature - 10-pack
Ten-bulb box of #555 high quality Eiko miniature lamps
In Stock$2.99 -
Coil sleeve - 1/2 x 2-3/16 inch 260-0003-00
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
In Stock$0.99 -
Lockbar - Williams standard D-12615
Williams / Bally regular cabinet stainless steel lockdown bar...
Out Of Stock$89.99 -
Leg - 28-1/2 inch chrome plated
Standard 28-1/2 inch ribbed pinball machine leg with chrome plated finish for Williams...
In Stock$16.99 -
Leaf switch End of Stroke - normally closed
Flipper end of stroke switch for electronic and electromechanical pinball machines.
In Stock$4.99 -
Ball shooter rod - black
Universal Ball Shooter rod with black plastic knob. Used on all Williams /...
In Stock$9.99 -
Flipper bushing - Williams
Nylon flipper bushing is used on Williams Pinball games
In Stock$1.29 -
Trim - playfield glass back 20-3/8 inch
Rear black plastic playfield glass trim molding used on most Bally/Williams games.
In Stock$7.99 -
Lamp #89 Miniature - 10-pack
Ten-bulb box of #89 high quality miniature incandescent lamps.
In Stock$5.49 -
Coil - solenoid no diode
Common solenoid coil with no diode.
In Stock$13.49 -
Coil - solenoid no diode 090-5044-ND
Common solenoid coil used on many manufacturers pinball machines.
In Stock$16.99 -
Flipper & shaft - Williams logo white
Flipper & shaft - Williams logo white
In Stock$7.99 -
Lamp socket - wedge base small twist-in
Small twist-in wedge base socket for #555 wedge base lamps. Replaces 077-5007-00
In Stock$1.09 -
anyPin NVRAM Battery Eliminator Universal
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Out Of Stock$79.99 -
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
In Stock$1.29 -
Lamp #906 Miniature - 10-pack
Ten-bulb box of #906 High quality miniature incandescent lamp. May be replaced with 05-906W LED or 04-0912 bulbs.
In Stock$6.49 -
Leg set - 28-1/2 inch chrome plated short rib (4)
Williams chrome plated legs with 9 inch support ribs used on many System 11 and 11B...
In Stock$106.99 -
Relay - 24v cube style
Plastic cube style, circuit board mounted DPDT (double pole, double throw)...
In Stock$29.99 -
Spring - barrel compression shooter black
Spring - barrel compression shooter black
In Stock$0.69 -
Glass playfield 21 x 43 x 3/16 inch HD anti-reflection
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
In Stock$259.99 -
Nut 3/8-16 hex 5/8 inch flat to flat
3/8-16 hex machine screw nut, steel & zinc 5/8 across flats
In Stock$0.29 -
Coil sleeve - 2-1/16 inch with flange
Coil sleeve - 2-1/16 inch with 3/16 inch flange
In Stock$0.99 -
Spring - barrel compression shooter brass
Spring - barrel compression shooter brass
In Stock$0.89 -
Shooter spring red .042 inch Highest tension
Highest tension ball shooter spring available has a .042 inch wire diameter. U...
In Stock$1.09 -
Pin-Buddy™ combo kit
Pin-Buddy™ combo kit
In Stock$49.99 -
Capacitor 2.2 uF 250v axial NP yellow
Yellow wrapper 2.2 uF @ 250 volt axial lead non-polarized metalized polyester. 125-5002-00
In Stock$4.49 -
Rubber bumper grommet - apron
Playfield glass protector black rubber grommet used on aprons
In Stock$0.49 -
Wire gate - ball trough runway
Wire gate used on early solid state Williams ball trough runway assemblies
In Stock$2.99 -
AC Power Cord - 15 foot stripped end
AC Power Cord - 15 foot stripped end
In Stock$12.99 -
Glass Backglass clear 27 x 18-7/8 x 1/8 inches
Clear tempered 27 x 18-7/8 x 1/8 inch thick glass
In Stock$59.99 -
Opto sensor IR LED
Williams drop target opto transceiver
In Stock$6.99 -
Pin-Buddy™ Game Saver Cantraption™ 45°
Pin-Buddy™ Game Saver Cantraption&tm 45°
In Stock$19.99 -
PINSCORE Display Sys TAXI & POLICE
PINSCORE Display System for TAXI & POLICE FORCE
Out Of Stock$299.99 -
Latch - toggle back box
Back box toggle latch 20-9347 or tension latch
In Stock$7.49 -
Coil - solenoid no diode
Common solenoid coil used on many manufacturers pinball machines.
In Stock$19.99 -
Switch miniature 1-3/4 inch lever with hook
Miniature microswitch switch with 1-3/4" flat actuator.
In Stock$7.99 -
Outhole runway ball guide with baffle
Metal outhole runway trough ball guide with baffle.
In Stock$23.99 -
Glass corner protectors - Set of 2
Glass corner protectors - Set of 2
In Stock$9.99 -
Switch - sub-miniature 4" wire lever
Universal snap action submicroswitch with 4 inch wire actuator that can be formed to various shapes.
In Stock$5.49 -
Lane guide - 2-1/8 inch red A-9394
Lane guide - 2-1/8 inch red A-9394
In Stock$2.79 -
Switch mini w/flat blade 1.05"
Miniature switch with flat actuator lever.
In Stock$3.99 -
Speaker 6-1/2 inch - 8 ohm up to 40 watt
6-1/2 inch speaker has 8 ohm impedance with 6 oz magnet. 6-1/4 inch diameter.
In Stock$57.99 -
IC - 24 pin DIP Static RAM 6116LP XO-928
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Out Of Stock$8.99 -
Leg - 28-1/2 inch Black smooth set of 4
Set of 4 standard black durable processed smooth finish 28-1/2 inch ribbed leg.
In Stock$129.99 -
Pinball Event Tune-Up Kit
Pinball Event Tune-Up Kit
In Stock$22.50 -
Lamp socket & #44 bulb with diode USE A-17807
Lamp socket & #44 bulb with diode USE A-17807
For Reference -
Relay board assy general illumination
Williams System 11 pinball machine 24 volt solenoid and General Illumination
In Stock$49.99 -
Plunger and link 2-1/8 inch
Williams plunger and link assembly with 2-1/8 inch long plunger
In Stock$4.99 -
Transformer - Williams Sys 11 115/230v
Refurbished Williams transformer 115/230 volts 50/60 Hz with connectors...
For Reference -
Leg - 28-1/2 inch naked
New bare metal 28-1/2 inch long Williams style leg ready for your own painting...
In Stock$16.99 -
Pin-Buddy™ Game Saver Cantraption™ 180°
Pin-Buddy™ Game Saver Cantraption™ 180°
In Stock$19.99