Williams RIVERBOAT GAMBLER Parts
The following parts are known to work in Williams RIVERBOAT GAMBLER.
-
Sheet Metal Screw #4 x 1/2 inch p-flh-a
4 x 1/2 inch sheet metal screws Phillips flat head.
In Stock$0.19 -
Connector - IDC orange 12 postion
12 position Insulation Displacement Connector (IDC).
In Stock$2.49 -
Ribbon Cable - 20 pin 9 inch
Ribbon Cable - 20 pin 9 inch
In Stock$11.99 -
Resistor - 5.6 ohm 5 watt 10%
Resistor 5.6 ohm 5 watt 10%
In Stock$1.29 -
Lift crank arm
Lift crank arm assembly used in Bally/Williams ramp lifting mechanisms.
In Stock$15.99 -
Washer .203 x .625 x .059 inches
Washer .203 x .625 x .059 inches
In Stock$0.59 -
Copper switch blade
Save 50% on 10 or more pieces. .02" thick copper switch back blade.
In Stock$0.29 -
Machine Screw 6-32 x 3/8" p-flh
Flat phillips head machine screw has 6-32 thread and is 3/8" long.
In Stock$0.19 -
Rivet - 1/8 diameter x 9/16 inch
Rivet - 1/8 inch diameter x 9/16 inch
In Stock$0.19 -
Bolt carriage #10-24 x 1-1/4"
Carriage bolt 10-24 x1-1/4 inch long zinc plated.
In Stock$0.49 -
Heatsink 6030b
Heatsink TO-220 transistors 6030B PB1-36CB
In Stock$5.99 -
Machine Screw 4-40 x 5/16" p-ph-s
Machine screw with 4-40 thread and 5/16" long with phillips pan head and i...
In Stock$0.29