Williams NO GOOD GOFERS Parts
The following parts are known to work in Williams NO GOOD GOFERS.
-
Plunger
plunger
In Stock$5.49 -
Target face - round 1 inch orange opaque.
Target face round 1 inch orange opaque.
In Stock$1.49 -
NO GOOD GOFERS (Williams) lift plate
Williams NO GOOD GOFERS pinball machine lift ramp mounting plate. Re...
In Stock$4.49 -
NO GOOD GOFERS (Williams) latch
NO GOOD GOFERS (Williams) latch
For Reference -
Label - Install 6 Balls
Label for lockbar receiver mechanism on Williams WPC pinball machines with...
In Stock$0.99 -
Ribbon Cable - 14-pin 25 inch
14-pin 25 inch long ribbon cable with ferrite bead.
In Stock$9.99 -
Target oblong stat-op blue plastic only
Target oblong stat-op blue plastic only
In Stock$1.29 -
Connector - IDC green 13R mt/thru 18/156
13R mt/thru 18/156
In Stock$3.49 -
NO GOOD GOFERS (Williams)5/8 coil stop
NO GOOD GOFERS (Williams) Coil centering bracket 5/8 inch studs
In Stock$5.99 -
Pop bumper body Williams 36mm red
Pop bumper body Williams 36mm red
In Stock$2.99 -
Pop bumper body Williams 36mm yellow transparent
Pop bumper body Williams 36mm yellow transparent
In Stock$2.99 -
Twin nut plate - switch stack
Twin nut plate - switch stack. Replaced by 01-9321
For Reference