Williams NO GOOD GOFERS Parts
The following parts are known to work in Williams NO GOOD GOFERS.
-
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. Replaced by 20-8712-43
For Reference -
Machine Screw 8-32 x 5/8" p-flh
Machine screw 8-32 thread x 5/8" long phillips flat head.
In Stock$0.19 -
Flipper crank bolt with flat 90 degree notch washer modified
Flipper crank bolt with flat 90 degree notch washer modified for use on flipper pawl.
For Reference -
Rivet - .125 x .187 x .218 inch brass
Rivet - .125 x .187 x .218 inch brass
In Stock$0.29 -
Sheet Metal Screw #6 x 1" p-ph-a
Sheet Metal Screw #6 x 1" p-ph-a
In Stock$0.19 -
Screw adjust assy
Screw adjust assy
Out Of Stock$29.99 -
Sheet Metal Screw #4 x 7/8 inch p-rh-tcs t25
Sheet metal screw #4 (type 25)
In Stock$0.29 -
Sheet Metal Screw #6 x 5/8 inch p-ph t-25
Sheet Metal Screw #6 x 5/8 inch p-ph t-25
In Stock$0.49 -
Twin nut plate - switch stack
Twin nut plate - switch stack. Replaced by 01-9321
For Reference -
Machine Screw 8-32 x 5/8 inch ph t-r Torx®
Machine Screw 8-32 x 5/8 inch ph t-r Torx®
In Stock$0.49 -
Sheet Metal Screw #8 x 1/2" p-pn type 25
Sheet Metal Screw #8 x 1/2" p-pn type 25
In Stock$0.50 -
Washer .187 x .625 x .059 inch #8
Washer .187 x .625 x .059 inch #8
In Stock$0.39