Bally BLACK ROSE Parts
The following parts are known to work in Bally BLACK ROSE.
-
Washer 0.125 x 0.281 x .032 inch
Washer - zinc plated- 0.125 x .281 x .032 inch rivet back
In Stock$0.59 -
Socket IC PLCC 84 pin
Socket IC PLCC 84 pin
In Stock$5.49 -
Switch sub-mini assembly
Sub miniature snap action switch with 3 terminals and custom wireform. Use 12-SMSB and trim actuator as needed.
For Reference -
E-clip for 5/16" shaft
E-clip or e-ring commonly used on many mechanisms. 5/16" measured at the o...
In Stock$0.39 -
Nut 8-32 keps
Nut 8-32 keps
In Stock$0.29 -
Sheet Metal Screw #6 x 1" pl-hwh
The most common sheet metal / wood screw in late model pinball machines. T...
In Stock$0.19 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
Foam rubber strip 3/4 wide x 1/4 thick per inch
Foam rubber strip 3/4 wide x 1/4 thick per inch - black
In Stock$0.29 -
Connector - IDC red 8 position 8R mt/end
8 position Insulation Displacement Connector (IDC)
In Stock$2.29 -
Capacitor 10 uF @ 50v axial non-polarized
Capacitor 10 mfd non polarized 50v +-20% tolerance with axial leads.
In Stock$1.99 -
Connector 2 position .062 inch terminals
2 position receptacle with no mounting ears uses .062 inch crimp terminals.
In Stock$0.29 -
IC Socket - 16 pins
16 pin double wipe integrated circuit pcb socket.
In Stock$0.49