Williams ROAD SHOW Parts
The following parts are known to work in Williams ROAD SHOW.
-
Bolt carriage 1/4-20 x 1-1/4 inch; black
Bolt is 1/4-20 thread x 1-1/4" long and used in machines such as: BUGS...
In Stock$0.89 -
Sheet Metal Screw #6 x 1/2 inch p-trh
#6 Truss head zinc plated machine screw 1/2 inch long.
In Stock$0.29 -
Machine Screw 6-32 x 3/8" p-ph
Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.
In Stock$0.19 -
Spring - extension - slide assembly
Extension spring used on late model Williams/ Bally playfields
In Stock$1.99 -
Pop bumper cap - yellow transparent
Yellow transparent pop bumper cap
In Stock$2.99 -
Machine Screw 8-32 x 3/8 inch p-ph-sems
Machine screw 8-32 x 3/8 inch phillips pan head.
In Stock$0.19 -
Coil - solenoid mini SM-31-900-DC
Eyelid coil on Williams games FUNHOUSE and ROADSHOW
In Stock$23.99 -
Cable clamp 1 inch diameter single
Cable clamp 1 inch diameter single
In Stock$0.59 -
Trough opto trans. board 4-ball Williams
Late model 4-ball transmitter board for Bally/Williams pinball machines. Replaces the A-18617
In Stock$37.99 -
Gear 14 & 56 teeth
IMPROVED sprocket commonly used in FUNHOUSE and ROAD SHOW talking head
In Stock$14.99 -
Transformer - Williams WPC 94
Refurbished Williams transformer with connectors. Reference: 5610-13...
For Reference -
Mini post 8-32 x 1/2 inch machine
Common nickel plated ball guide mini-post with 8-32 x 1/2 inch long.
In Stock$2.49 -
Dome with screw tabs - clear
Clear dome with tabs. Used on many pinball playfields . Replaces 550-5031-01
In Stock$1.99 -
Speaker 3 inch - 4 ohm tweeter 15 watts
3 inch tweeter speaker used in backboxes of various pinball machines.
In Stock$34.99 -
Machine Screw 10-32 x 5/8" p-ph-s
Machine Screw 10-32 x 5/8" p-ph-s
In Stock$0.29 -
Trough opto recvr. board WPC Williams
Newly re-designed opto receiver for late model Williams/Bally WPC-S, WPC-9...
For Reference -
Bolt 3/8-16 x 1-1/4" round head rib neck
3/8-16 x 1-1/4 inch round head long rib neck carriage bolt
For Reference -
Nut 6-32 wing - plumb bob wire
Wing nut with 6-32 thread for plumb bob tilt assembly wire.
In Stock$0.19 -
Machine Screw 6-32 x 1/2 inch p-ph-sems
Machine screw with 6-32 thread and 1/2 inch long with phillips pan head
In Stock$0.39 -
Post spacer #8 x 1 inch
Post spacer #8 x 1 inch
In Stock$5.49 -
Opto sensor drop target
Drop target opto for A-13609 and 4 LED illuminated target assembly
In Stock$6.99 -
Coil - solenoid
Common solenoid coil used on many manufacturers pinball machines.
In Stock$19.99 -
E-clip for 1/8" shaft 270-5000-00
E-clip or e-ring commonly used on many mechanisms. 1/8" measured at the op...
In Stock$0.19 -
Switch sub-mini assembly
Sub miniature snap action switch with 3 terminals and custom wireform
In Stock$15.99 -
Plate - Shooter Rod Mounting
Ball shooter mounting plate
In Stock$8.49 -
Lock plate backbox Williams/Bally
Backbox lock plate for Williams/Bally WPC System game backbox locks...
In Stock$3.99 -
Post stud #8 x 1-1/2 inch wood screw
Post stud #8 x 1-1/2 inch wood screw USE 530-5010-01
Out Of Stock$2.49 -
Minipost - plastic clear 1 inch tall
Minipost - plastic clear 1 inch tall
In Stock$0.69 -
Dome - Clear flash lamp - twist-lock
Clear twist-lock plastic mini dome for flash lamps.
In Stock$1.99 -
Bubble level vial Williams
Bubble level vial commonly used in Williams / Bally pinball machines...
In Stock$5.99 -
Fuse - time delay 4A (5 x 20mm) 5 pack
Fuse - time delay 4 amp (5.0mm x 20mm) - Box of 5. Reference Willia...
In Stock$2.99 -
Bracket - Coil Retainer
Coil retainer bracket
In Stock$2.49 -
Drive arm Williams/Bally
Drive arm assembly used in solid state Williams/Bally games.
In Stock$17.99 -
Snap-in standoff #6 x .343 inch black
Black plastic spacer #6 X 0.343 inch tall
In Stock$0.89 -
Screen - Speaker / vent 7
Dark gray perforated plastic vent screen
In Stock$5.99 -
Post - plastic double star clear - 1-1/2 inch tall
Post - plastic double star clear- 1-1/2 inch
In Stock$0.99 -
Crank arm nylon with rivets
Crank arm nylon with rivets assembly
In Stock$22.99 -
Switch mounting bracket
Switch Mounting Bracket. Reference: 01-9375
In Stock$4.49 -
Flipper spring steel lever 4 inch
Flipper spring steel lever 4 inch
In Stock$4.99 -
Sheet Metal Screw #8 x 1/2" pl-hwh-a
#8 x 1/2" indented hex washer head screw with piercing tip
In Stock$0.29 -
Jet bumper coil bracket assembly
Jet bumper coil bracket assembly includes AE-26-1200 coil, yokes, plunger, spring, fasteners.
In Stock$43.99 -
Playfield slide assembly WPC right
Williams/Bally pinball machine RIGHT playfield slide assembly.
In Stock$39.99 -
Hinge assembly upper insert
Hinge assembly upper insert
In Stock$16.99 -
Connector - IDC orange 7R mt/end 18/156
IDC orange connector 7R mt/end 18/156. Reference: 5792-10818-07
In Stock$1.99 -
Ribbon Cable - 26 pin 32 inch
32 inch 26 pin 2 connector Display Data & Control ribbon cable.
In Stock$19.99 -
Speaker 6-1/2 inch - 4 ohm woofer
6-1/2 inch outer diameter 4 ohm woofer speaker used in many pinball machine and video cabinets
Out Of Stock$29.99 -
Tape double sided .032 x 3/4 inch x 9 ft
Tape double sided .032 x 3/4 inch x 9 ft
In Stock$13.99 -
Standoff clip
Standoff clip
For Reference -
Lamp socket and diode assembly
Lamp socket and diode assembly
In Stock$5.99 -
Nut 6-32 keps
Keps nut 6-32 with attached external tooth lockwasher.
In Stock$0.29 -
Pop Bumper cap - clear
Clear transparent pop bumper cap
In Stock$2.99 -
Screw - 6-32 X 1-1/2" finned shank black
6-32 X 1-1/2" black spiral fin shank steel screw.
For Reference -
Lamp holder
Lamp holder assembly. Reference: A-17835
In Stock$5.95 -
Pivot nut 11/16 inch
Pivot nut 11/16 inch
In Stock$3.99 -
Adjusting post
Dual rubber ring adjustable post used on many late model machines.
In Stock$2.99 -
Capacitor 0.1uf 50v +/-20 axial Z5U
Axial capacitor 0.1UF 50v +/-20 axial Z5U temperature coefficient.
In Stock$0.19 -
Sheet Metal Screw #8 x 1/2 inch ind pl-hwh
One of the most commonly used screws in Williams/Bally pinball machines.
In Stock$0.29 -
Rivet - 1/8 x 7/32 inch 7/32 oval head
Rivet - 1/8 inch shaft diameter x 7/32 inch shaft length. 7/32 oval head
In Stock$0.29 -
Nut 8-32 ESNA/NTM stop nut
Stop nut 8-32 thread.
In Stock$0.19 -
Plug - male 3 position
3 position plug uses .093" diameter crimp terminals.
In Stock$0.29