Williams MEDIEVAL MADNESS (Williams) Parts
The following parts are known to work in Williams MEDIEVAL MADNESS (Williams).
-
Washer 0.265 inch x 0.500 inch x 0.032 inch
Flat washer 0.265 inch x 0.500 inch x 0.032 inch
In Stock$0.19 -
Washer .172 x .437 x .062 inch brass
Washer .172 x .437 x .062 inch brass
In Stock$0.49 -
Washer .361" x .500" x .059"
Flat washer .361" x .500" x .059" thick.
In Stock$0.39 -
Flat washer .2031 x .625 x .105 inches modified
Washer - modified crank washer
In Stock$0.39 -
Flipper crank bolt with flat 90 degree notch washer modified
Flipper crank bolt with flat 90 degree notch washer modified for use on flipper pawl.
For Reference -
Lock washer #6 split
Lock washer #6 split
In Stock$0.19 -
Lock washer #8 split
lock washer #8 split
In Stock$0.19 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
Sheet Metal Screw #8 x 1/2 inch ind pl-hwh
One of the most commonly used screws in Williams/Bally pinball machines.
In Stock$0.29 -
EX-PLAS #8 x 1" ind pl-hwh
EX-PLAS #8 x 1" ind pl-hwh
In Stock$0.29 -
Twin nut plate - switch stack
Twin nut plate - switch stack. Replaced by 01-9321
For Reference -
Roll pin 1/8 x 7/16 inches 20A-8716-5
1/8 diameter x 7/16 inches length slotted spring roll pin. USE 20-8716-5
For Reference