Williams INDIANA JONES (Williams) Parts
The following parts are known to work in Williams INDIANA JONES (Williams).
-
Bolt carriage 10-24 x 2-1/4 inch black
Bolt carriage 10-24 x 2-1/4 inch black
In Stock$1.29 -
anyPin NVRAM Battery Eliminator
NVRAM replacement for 6116, 6264 RAM ICs
In Stock$39.99 -
Machine Screw 8-32 x 3/4" ph TPR Torx®
Machine Screw 8-32 x 3/4" TPR Security Torx® - pan head 4008-01093-12B
In Stock$0.79 -
Coil bracket no spring hooks
Williams coil bracket used on most late model Williams and Bally/Williams.
In Stock$4.99 -
Coil - solenoid--no diodes
3 terminal, dual winding solenoid coil for diverter assemblies
In Stock$26.99 -
Machine Screw 8-32 x 3/8" p-flh
Machine screw 8-32 thread x 3/8" long phillips flat head.
In Stock$0.19 -
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
In Stock$19.99 -
Capacitor 15000 uF 25v radial snap
Capacitor 15,000 mf 25 volts snap mount. Suitable replacement for 5040-12313-00.
In Stock$4.49 -
Nut 4-40 esn
Nut 4-40 thread with elastic stop.
In Stock$0.19 -
Armature
Armature. Reference: A-15821
In Stock$15.99 -
Opto board - receiver 7
7 transistor opto receiver board
In Stock$99.99 -
Bracket - playfield service support
Bracket - WPC playfield service support
In Stock$38.99 -
Switch - stand-up assembly
Standup switch assembly with bracket. A-4834-H
For Reference -
Plunger - drop target reset
2-1/2" plunger overall length with a 10-32 thread stud
Out Of Stock$6.99 -
Battery 1.5v "AA" alkaline
Battery 1.5v AA alkaline for CPU board memory.
In Stock$2.99 -
Machine Screw 6-32 x 1-7/8" p-ph
Machine screw with 6-32 thread and 1-7/8" long with phillips pan head...
In Stock$0.39 -
Snap-in standoff #6 x .250 inch black
Black plastic spacer 0.250" Length
In Stock$1.49 -
Cable clamp 1/2 inch diameter single
Cable clamp 1/2 inch diameter single
In Stock$0.39 -
Machine Screw 4-40 x 5/8" p-ph-s
Machine screw with 4-40 thread and 5/8" long with phillips pan head
In Stock$0.39 -
Thermostat 85 C with leads 5644-09368-00
Thermostat 85° C with leads 5644-09368-00
In Stock$9.85 -
IC - 14 pin SMD 74LS14 inverter
14 leg SOIC package 74LS14 Inverter with Schmitt Trigger integrated circuit.
In Stock$2.49 -
Sheet Metal Screw #5 x 5/8 inch p-rh-a
#5 sheet metal screw 5/8 inch long is used to secure EOS on flipper assemblies...
In Stock$0.29 -
Opto base mounting - white
Opto holder - white
In Stock$3.49 -
Machine Screw 8-32 x 1" TPR Torx - ph
Machine Screw 8-32 x 1" TPR Torx - pan head. T-15
In Stock$0.59 -
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Pin-Buddy™ Game Saver Cantraption™ 45° RED
In Stock$19.99 -
Spring - extension
Spring - extension
In Stock$0.89 -
Yoke metal - pop bumper substitute 01-5492
Yoke metal - pop bumper substitute 01-5492
For Reference -
Machine Screw 10-32 x 5/8" sl-bnd-hd-brass
Brass slotted machine screw 10-32 thread 5/8" long.
In Stock$0.59 -
INDIANA JONES (Williams) Plastic set
Williams INDIANA JONES Playfield Plastic Set. Very limited supply...
For Reference -
Washer 0.125 x 0.281 x .032 inch
Washer - zinc plated- 0.125 x .281 x .032 inch rivet back
In Stock$0.59 -
Pop bumper skirt - clear
Pop bumper skirt - clear
In Stock$1.49 -
Socket IC PLCC 84 pin
Socket IC PLCC 84 pin
In Stock$5.49 -
INDIANA JONES (Williams) 3-bank DT assy
3-Bank drop target assembly. Includes: 3-bank bracket and stud assembly
In Stock$119.99 -
Nut 8-32 keps
Nut 8-32 keps
In Stock$0.29 -
Sheet Metal Screw #6 x 1" pl-hwh
The most common sheet metal / wood screw in late model pinball machines. T...
In Stock$0.19 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
Washer 0.265 inch x 0.500 inch x 0.032 inch
Flat washer 0.265 inch x 0.500 inch x 0.032 inch
In Stock$0.19 -
INDIANA JONES (Williams) Rubber Ring Kit WHITE
45 piece white rubber ring kit for Williams INDIANA JONES pinball machine includes...
In Stock$20.99 -
Bracket - speaker panel latch
Bracket - speaker panel latch
In Stock$7.49 -
Connector - IDC red 8 position 8R mt/end
8 position Insulation Displacement Connector (IDC)
In Stock$2.29 -
Capacitor 10 uF @ 50v axial non-polarized
Capacitor 10 mfd non polarized 50v +-20% tolerance with axial leads.
In Stock$1.99 -
Connector 2 position .062 inch terminals
2 position receptacle with no mounting ears uses .062 inch crimp terminals.
In Stock$0.29 -
Connector - IDC green 7 position
.156" spacing 7 position Insulation Displacement style connector. 7r...
Out Of Stock$0.99 -
Machine Screw 4-40 x 3/8" p-ph
Machine screw with 4-40 thread and 3/8" long with phillips pan head...
In Stock$0.49 -
Bracket, mounting
Coil mounting bracket. Used in Bally ATTACK FROM MARS, Williams...
In Stock$9.99 -
Battery contact plastic holder Williams
Battery contact. Reference: 01-10884
In Stock$0.89 -
Rivet - semi tubular - steel zinc
Semi-tubular rivet - 0.122 inch x 0.218 inch 0.187 inch - steel zinc
In Stock$0.19 -
Lamp socket - pcb v wedge
Lamp socket for wedge base lamps. Reference: 24-8804
In Stock$1.49 -
Socket and #555 lamp
Socket and #555 lamp
For Reference -
Sheet Metal Screw #6 x 3/4" pl-hwh
Steel zinc 6 X 3/4 unslotted sheet metal screw.
In Stock$0.19 -
Connector 4 pin .062 inch terminals
4 position plug uses .062 inch crimp terminals. Reference: 5791-10774-...
In Stock$0.99 -
Connector 3 position .093 inch terminals
3 position receptacle with no ears
In Stock$0.29 -
Resistor .22 ohm 1 watt 5%
Resistor .22 ohm 1watt 5% tolerance
In Stock$0.39 -
Lamp socket & #89 bulb assembly
Lamp socket and #89 bulb assembly. Reference: A-8798
For Reference -
Drop target 3 bank PCB assembly Williams
New design circuit board for 3 bank Williams drop target assemblies
In Stock$47.99 -
IC - 40 pin DIP MPU 2 Mhz 68B09E
68B09E MPU 2 Mhz - 40 pin DIP
In Stock$14.99 -
Washer .141 x .437 x .032 inch
Pop bumper yoke Washer .141 x .437 x .032 inch
In Stock$0.19 -
Eject cam arm right
Eject cam arm right
Out Of Stock$11.99 -
Machine Screw 6-32 x 5/8" p-ph-sems
Machine screw with 6-32 thread and 5/8" long with phillips pan head and in...
In Stock$0.29 -
Machine Screw 8-32 x 3/8" pl-hh-s
Machine Screw 8-32 x 3/8" pl-hh-s
In Stock$0.29