Williams INDIANA JONES (Williams) Parts
The following parts are known to work in Williams INDIANA JONES (Williams).
-
Jet bumper coil bracket assembly
Jet bumper coil bracket assembly includes AE-26-1200 coil, yokes, plunger, spring, fasteners.
In Stock$43.99 -
Bracket - playfield hold down
Playfield support bracket for Williams and other machines.
In Stock$5.49 -
Hinge assembly upper insert
Hinge assembly upper insert
In Stock$16.99 -
Connector - IDC orange 7R mt/end 18/156
IDC orange connector 7R mt/end 18/156. Reference: 5792-10818-07
In Stock$1.99 -
IC - 6 pin DIP opto isolator 4N25
Integrated circuit opto isolator 4N25 NTE3040 SK2040
In Stock$1.79 -
Kicker bracket assembly
Bracket used on Williams and Bally kicker assemblies.
In Stock$23.99 -
Spring - extension armature plate
Spring - extension armature plate.
In Stock$0.99 -
Ribbon Cable - 26 pin 32 inch
32 inch 26 pin 2 connector Display Data & Control ribbon cable.
In Stock$19.99 -
Bumper post 8-32 stud 6-32 top stud
Bumper post with a 3/8" hex base and 8-32 bottom thread stud and 6-32 top.
Out Of Stock$3.49 -
Speaker 6-1/2 inch - 4 ohm woofer
6-1/2 inch outer diameter 4 ohm woofer speaker used in many pinball machine and video cabinets
Out Of Stock$29.99 -
Tape double sided .032 x 3/4 inch x 9 ft
Tape double sided .032 x 3/4 inch x 9 ft
In Stock$13.99 -
Standoff clip
Standoff clip
For Reference -
Machine Screw 10-32 x 3/8 inch t-r button top
10-32 x 3/8 Torx with pin button head security cap screw
In Stock$0.59 -
INDIANA JONES (Williams) Fuselage Bi-Plane kit
INDIANA JONES (Williams) Fuselage Bi-Plane kit
In Stock$59.99 -
Power junction box Williams WPC-89
Power junction box Williams System WPC-89
In Stock$74.99 -
Nut 6-32 keps
Keps nut 6-32 with attached external tooth lockwasher.
In Stock$0.29 -
Bracket & post assembly
Bracket for Bally/Williams pinball machine target assembly
In Stock$29.99 -
Screw - 6-32 X 1-1/2" finned shank black
6-32 X 1-1/2" black spiral fin shank steel screw.
For Reference -
Capacitor 0.1uf 50v +/-20 axial Z5U
Axial capacitor 0.1UF 50v +/-20 axial Z5U temperature coefficient.
In Stock$0.19 -
INDIANA JONES (Williams) Pinball Machine Fighter Plane
INDIANA JONES (Williams) Pinball Machine Fighter Plane
In Stock$54.99 -
Fastener - 1/2 inch button head
Fastener with 1/2 inch button head.
For Reference -
Sheet Metal Screw #8 x 1/2 inch ind pl-hwh
One of the most commonly used screws in Williams/Bally pinball machines.
In Stock$0.29 -
Rivet - 1/8 x 7/32 inch 7/32 oval head
Rivet - 1/8 inch shaft diameter x 7/32 inch shaft length. 7/32 oval head
In Stock$0.29 -
Nut 8-32 ESNA/NTM stop nut
Stop nut 8-32 thread.
In Stock$0.19 -
Plug - male 3 position
3 position plug uses .093" diameter crimp terminals.
In Stock$0.29 -
Spring - extension
Spring - extension
In Stock$0.99 -
Bolt carriage 1/4-20 x 1-1/2" RH black
Carriage bolt has 1/4-20 thread and is 1-1/2" long with a round head and b...
In Stock$0.79 -
INDIANA JONES (Williams) Translite
Williams INDIANA JONES pinball machine screened translite backglass art...
For Reference -
Rivet - 1/8 x 5/32 inch long
Zinc-plated steel rivet -1/8 inch shaft diameter x 5/32 inch long
In Stock$0.19 -
Machine Screw 6-32 x 3/16" p-ph-sems
Machine screw with 6-32 thread and 3/16" long with phillips pan head and attached lockwasher.
In Stock$0.39 -
Williams Coil bracket
Common knocker coil bracket used in many Williams games.
In Stock$10.99 -
Dot matrix controller board WPC
Dot matrix controller board WPC
For Reference -
Slide assembly - left playfield
This is the left side Playfield Slide Assembly used on all late model Wil...
For Reference -
Spring - extension
Spring - extension
In Stock$1.19 -
Switch sub-mini assembly
Sub miniature snap action switch with 3 terminals and custom wireform actu...
In Stock$12.99 -
Connector - IDC green 11 mt/thru 22/156
11 mt/thru 22/156
In Stock$3.49 -
Rivet - 1/8 x 1/4 inches nickel
Rivet - 1/8 x 1/4 inches nickel
In Stock$0.19 -
Connector - IDC green 7 position
Connector - 7 position insulation displacement style with passthrough...
In Stock$1.99 -
Switch miniature 1-3/4" bent end lever
Miniature snap action switch with 3 terminals and custom wireform.
In Stock$21.99 -
Connector 2 position .062 inch terminals 045-5107-02
2 position connector uses .062 inch crimp terminals.
In Stock$0.49 -
Resistor SIP 10 pin 4.7k 9r 10 5%
Single inline 10 pin resistor network 4.7k 9r 10 5%
In Stock$2.99 -
Machine Screw 2-56 x 3/8 inch p-ph-s
Machine screw with 2-56 thread and 3/8 inch long with phillips pan head.
In Stock$0.29 -
Reset plunger finger assy Williams
Williams reset plunger finger assembly.
In Stock$8.99 -
Washer .265 x .500 x .067 inch
Washer 0.265 inch x .500 inch x .067 inch
In Stock$0.19 -
WPC Motor EMI Board assembly
Electro Magnetic Interference (EMI) controller board
In Stock$38.99 -
INDIANA JONES (Williams) Apron Decal set
Williams INDIANA JONES playfield apron (arch) decal set.
In Stock$44.99 -
WPC Schematic Manual May 1993
WPC Schematic Manual revised May 17th, 1993. Original
Out Of Stock$19.99 -
Fish paper display shield dot matrix Williams
Dot Matrix Display fish paper rear shield for WPC-95 games.
In Stock$9.99 -
Service outlet snap-in three prong WPC s
Snap-in service outlet used in WPC games. AC inlet IEC PMT 3P. Fits into...
In Stock$2.79 -
T-Nut 8-32 1/4" barrel - 19/32" base
1/4" tall barrel and 8-32 thread with 19/32"" base or flange.
In Stock$0.29 -
Logic power cable WPC
Logic power cable for Williams WPC pinball machines. Reference: H-15...
For Reference -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. measured at the o...
In Stock$0.49 -
Spring - compression
Compression spring.
In Stock$0.99 -
Pushbutton 1 inch round white 'Start'
Pushbutton 1 inch round white 'Start'
In Stock$10.99 -
Foam rubber protector 3/4" wide x 22-1/8" long x 1/4" thick
22-1/8 inch long foam rubber protector for widebody pinball machine front trim moldings.
In Stock$5.99 -
IC 16 pin DIP DAC AD1851 16 bit mono
Integrated circuit 16 pin DIP AD-1851 16 bit mono audio PCM.
For Reference -
Connector 2 position .093" terminals
2 position plug with no mounting ears uses .093" crimp terminals.
In Stock$1.49 -
Connector - IDC orange 13 position
13 position Insulation Displacement Connector (IDC).
In Stock$7.49 -
Plate - spacer cabinet slide
Plate - spacer pinball machine cabinet slide. Reference: 01-11408
In Stock$9.99 -
Bracket - drop target stop
Coil stop bracket for target mechanisms.
In Stock$5.99