Williams INDIANA JONES (Williams) Parts
The following parts are known to work in Williams INDIANA JONES (Williams).
-
Roll pin 1/8" x 7/16" 20A-8716-5
1/8" diameter x 7/16" length slotted spring roll pin. Reference:...
In Stock$0.39 -
INDIANA JONES (Williams) LED lamp kit
LED lamp complete conversion kit for Williams INDIANA JONES pinball
In Stock$229.99 -
Cap screw 10-32 x 3/8" socket flip brkt
Black 10-32 X 3/8 hex socket head cap screw...
In Stock$0.19 -
Machine Screw 6-32 x 1-1/4 inch p-ph
Machine screw with 6-32 thread and 1-1/4 inch long with phillips pan head.
In Stock$0.39 -
Chime plunger Williams 2-1/2"
Williams coil plunger for electromechanical chimes. Total length 2-1/2"...
In Stock$5.99 -
Rivet - 1/8 sft D x 3/16 sft L x 7/32 Head A
Steel zinc plated semi-tubular rivet with 7/32 inch oval head
In Stock$0.19 -
INDIANA JONES (Williams) "Lost" plastic
INDIANA JONES (Williams) "Lost" plastic
In Stock$62.99 -
Machine Screw 8-32 x 1/4" p-ph-sems
Machine screw 8-32 X 1/4" pan head phillips sems. Many applications. Used...
In Stock$0.19 -
Nut 10-32 esn nylock 238-1306-00
Nut with 10-32 thread and elastic stop top (esn) 238-1306-00
In Stock$0.19 -
Twin nut plate - Tinnerman switch stack
Twin nut 2 hole spring steel switch stack retainer
In Stock$0.99 -
Bracket - Coil mounting
Bracket - coil mounting
In Stock$4.99 -
Post - star yellow trans 1-1/16 inch
Yellow star post 1-1/16 inch common to late model Bally / Williams and other brand pinball machines.
In Stock$1.29 -
Snap-in standoff #6 x .541 inch black
Black plastic spacer #6 x 0.541 inch tall
In Stock$1.09 -
Crimp terminal .062 inch male
Crimp terminal .062 inch male
In Stock$0.19 -
Leaf switch - kicker
Switch - kicker.
In Stock$6.49 -
Plunger - coil
Coil Plunger
In Stock$4.99 -
Rivnut hex 3/8-16 x .845 inch
Rivnut hex 3/8-16 x .845 inch
In Stock$2.79 -
Pop bumper assembly red skirt
Pop bumper assembly red skirt
In Stock$19.99 -
Nut 6-32 hex
6-32 nut used on Williams flipper plates to secure flipper bushings.
In Stock$0.19 -
Bracket - back box toggle latch
Latch plated used with tension latch 20-9347 to secure backbox.
In Stock$3.49 -
Opto sensor
Opto transmitter & receiver pair in black plastic u-shaped housing
In Stock$4.49 -
Bolt carriage 1/4-20 x 1-1/4 inch; black
Bolt is 1/4-20 thread x 1-1/4" long and used in machines such as: BUGS...
In Stock$0.89 -
Sheet Metal Screw #6 x 1/2 inch p-trh
#6 Truss head zinc plated machine screw 1/2 inch long.
In Stock$0.29 -
Gun handle left and right side set
Gun handle left and right side set
For Reference -
Machine Screw 6-32 x 3/8" p-ph
Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.
In Stock$0.19 -
Spring - extension - slide assembly
Extension spring used on late model Williams/ Bally playfields
In Stock$1.99 -
Drop target reset plate Williams single
Single drop target reset finger plate...
In Stock$3.99 -
Machine Screw 8-32 x 3/8 inch p-ph-sems
Machine screw 8-32 x 3/8 inch phillips pan head.
In Stock$0.19 -
Cable clamp 1 inch diameter single
Cable clamp 1 inch diameter single
In Stock$0.59 -
Actuator arm - brass left
Special brass single drop target trip bracket/actuator.
In Stock$14.99 -
Machine Screw 2-56 x 1/2 inch p-ph-s
This is the small phillips panhead screw used to secure most playfield mic...
In Stock$0.39 -
Speaker 3 inch - 4 ohm tweeter 15 watts
3 inch tweeter speaker used in backboxes of various pinball machines.
In Stock$34.99 -
Machine Screw 10-32 x 5/8" p-ph-s
Machine Screw 10-32 x 5/8" p-ph-s
In Stock$0.29 -
MPU board Williams WPC 89
WPC89 System MPU board
In Stock$249.99 -
Nut 6-32 wing - plumb bob wire
Wing nut with 6-32 thread for plumb bob tilt assembly wire.
In Stock$0.19 -
Machine Screw 6-32 x 1/2 inch p-ph-sems
Machine screw with 6-32 thread and 1/2 inch long with phillips pan head
In Stock$0.39 -
Post spacer #8 x 1 inch
Post spacer #8 x 1 inch
In Stock$5.49 -
Opto sensor drop target
Drop target opto for A-13609 and 4 LED illuminated target assembly
In Stock$6.99 -
Lock plate backbox Williams/Bally
Backbox lock plate for Williams/Bally WPC System game backbox locks...
In Stock$3.99 -
Bumper post 8-32 stud 1-3/4 inch
Bumper post with hex base with 8-32 threaded bottom with 6-32 top hole
Out Of Stock$3.49 -
Post stud #8 x 1-1/2 inch wood screw
Post stud #8 x 1-1/2 inch wood screw USE 530-5010-01
Out Of Stock$2.49 -
Spring - extension - red eject
Spring - extension - red eject
In Stock$0.89 -
Fuse - time delay 4A (5 x 20mm) 5 pack
Fuse - time delay 4 amp (5.0mm x 20mm) - Box of 5. Reference Willia...
In Stock$2.99 -
Bracket - Coil Retainer
Coil retainer bracket
In Stock$2.49 -
Drive arm Williams/Bally
Drive arm assembly used in solid state Williams/Bally games.
In Stock$17.99 -
Link bushing
Williams / Bally flipper link bushing installed between flipper link and crank.
In Stock$0.99 -
Snap-in standoff #6 x .343 inch black
Black plastic spacer #6 X 0.343 inch tall
In Stock$0.89 -
INDIANA JONES (Williams) ramp
New upgrade "Jackpot / Path of Adventure" right side ramp for...
Out Of Stock$159.99 -
Eject shield red 1/8 inch holes
Plastic insert used on Williams pinball playfield. Replaced by 03-9101-9.
For Reference -
Screen - Speaker / vent 7
Dark gray perforated plastic vent screen
In Stock$5.99 -
INDIANA JONES (Williams) motor opto bd
Opto board assembly for Williams INDIANA JONES pinball machine Path of Adventure
In Stock$49.99 -
Insulator - switch fishpaper
Insulator - switch fishpaper
In Stock$0.79 -
Post - plastic double star clear - 1-1/2 inch tall
Post - plastic double star clear- 1-1/2 inch
In Stock$0.99 -
Switch mounting bracket
Switch Mounting Bracket. Reference: 01-9375
In Stock$4.49 -
Kicker bracket assembly right side
Entire ball kicker assembly kit includes coil, grommet, armature etc.
In Stock$59.99 -
Flipper spring steel lever 4 inch
Flipper spring steel lever 4 inch
In Stock$4.99 -
INDIANA JONES (Williams) Motor Idol roto
Williams INDIANA JONES pinball machine Idol Rotor Lock motor. Referen...
In Stock$119.99 -
Sheet Metal Screw #8 x 1/2" pl-hwh-a
#8 x 1/2" indented hex washer head screw with piercing tip
In Stock$0.29 -
INDIANA JONES (Williams) Rotor Lock
Roto door lock plastic for Williams INDIANA JONES pinball.
In Stock$14.99 -
IC - Motor control bridge driver L6203
Integrated circuit 3a DMOS bridge driver for motor control.
For Reference