Williams INDIANA JONES (Williams) Parts
The following parts are known to work in Williams INDIANA JONES (Williams).
-
Trim side channel - 27 inch translite top
Williams/Bally backglass trim. For games that use translites.
In Stock$6.49 -
Lamp socket - twist wedge large for #906
Large twist-in socket for #906 wedge base lamps.
In Stock$0.99 -
Trough assembly - Williams/Bally upgrade
Upgraded Trough Assembly for Williams / Bally pinball machines
In Stock$209.99 -
Plunger assembly 3.375 inches no hole
Plunger assembly 3.375 inches no hole
In Stock$12.99 -
Plunger assembly 3.385 inches
Bell armature or plunger assembly for ball kickers and poppers
In Stock$12.99 -
Connector rebuild kit - Williams WPC CPU board
Connector rebuild kit - Williams WPC CPU board
Out Of Stock$27.99 -
Nut 6-32 esn stop nut
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
In Stock$0.19 -
Knocker assembly kit Williams/Bally
Knocker assembly kit for Bally and Williams AE-23-800
In Stock$47.99 -
Opto assembly - IR LED Transmitter WHITE
Infrared Transmitter assembly in the white plastic housing.
In Stock$7.99 -
Williams/Bally opto board set WPC
Williams/Bally opto board set
In Stock$11.99 -
Switch sub-mini assembly blade
Sub miniature snap action switch with 3 terminals and custom wireform.
In Stock$5.99 -
Coil - no diode- straight terminals
Solenoid coil no diode with straight terminals
In Stock$24.99 -
Machine Screw 6-32 x 1/4 inch p-ph-sems
Machine screw 6-32 thread x 1/4 inch long with phillips head and external tooth lock washer
In Stock$0.29 -
Rail side playfield plastic trim 42-1/4
Playfield side rail plastic molding is 42-5/16"
In Stock$13.99 -
Capacitor 15000 uF 25v radial
Capacitor 15,000 mf 25 volts. Suitable replacement for 5040-12313-00.
In Stock$6.99 -
Pop bumper bracket 04-10888
Pop bumper bracket used on Williams / Bally machines and other brands.
In Stock$7.99 -
Glass Backglass clear 27 x 18-7/8 x 1/8 inches
Clear tempered 27 x 18-7/8 x 1/8 inch thick glass
In Stock$59.99 -
Pin-Buddy™ Game Saver Cantraption™ 45°
Pin-Buddy™ Game Saver Cantraption&tm 45°
In Stock$19.99 -
Plumb bob - casting
Common tilt plumb bob with 0.15 inch interior diameter for rod.
In Stock$5.49 -
WPC Spare Semiconductors Kit
Williams/ Bally WPC Spare Semiconductors Kit
In Stock$39.99 -
Post stud 8-32 x 2-3/8 inches 5/16 drive
#8-32 top thread and #8-32 bottom thread with 5/16 inch hex collar steel/zinc.
In Stock$2.79 -
Plunger link & crank pawl - left
Left side flipper unit Plunger- link-crank assembly
In Stock$9.99 -
Latch - toggle back box
Back box toggle latch 20-9347 or tension latch
In Stock$7.49 -
Post stud 8-32 x 2-1/16 inches 6-32 top
Playfield post fastener 6-32 top thread 1/4" long 8-32 bottom thread 3/8 inch
In Stock$2.99 -
Backglass trim kit - Williams WPC/System 11
Backglass trim kit - Williams WPC/System 11
In Stock$21.99 -
E-clip for 1/4 in shaft 20A-8712-25
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
In Stock$0.19 -
Coil - solenoid no diode
Common solenoid coil used on many manufacturers pinball machines.
In Stock$19.99 -
Machine Screw 6-32 x 3/8" p-ph-sems
Machine Screw 6-32 x 3/8" long phillips pan head with external tooth lockw...
In Stock$0.19 -
Flipper assembly Williams Fliptronic right
Williams WPC pinball system Fliptronic II complete flipper mechanism. Includes FL-11630 coil.
In Stock$59.99 -
Pop bumper skirt - red
Red pop bumper skirt, or wafer, used in most manufacturers' pop bumper.
In Stock$1.49 -
Switch miniature 1-3/4 inch lever with hook
Miniature microswitch switch with 1-3/4" flat actuator.
In Stock$7.99 -
Ribbon Cable - 14 pin 30 inch Display-Cont.
30 inch 14 pin 2 connector Data & Control ribbon cable with Display to Do...
In Stock$13.99 -
Nyliner® 1/4 inch bearing
Standard snap-in Nyliner® bearing bushing with 1/4 inch Inner Diameter
In Stock$0.99 -
Opto IR Transmitter board
Williams/Bally opto InfraRed transmitter board used in LED assembly A-1690...
In Stock$4.59 -
T-Nut 6-32 thread 1/4 inch barrel 1/2 inch 3 prong
6-32 thread tee nut with 1/4 inch barrel height, 3-prong, 19/32 inch base
In Stock$0.19 -
Slotted Opto sensor IR LED
OPB804/QVE11233.0086 Opto
In Stock$4.99 -
Speaker 5-1/4 inch - 4 ohm 25 watt
5-1/4 inch 4 ohm 25 watt speaker
In Stock$29.99 -
AC Line cord cover
AC Line cord cover for WPC Bally/Williams pinball machine cabinets.
Out Of Stock$11.99 -
Bumper post #10 (3/8 deep ms top)
Metal post with round base 6-32 tap and 10-32 thread on bottom.
In Stock$3.99 -
Ground braid 1/4 in wide - per foot
Wire 1/4" ground braid
In Stock$1.79 -
Spring - compression jet bumper
Compression spring used on pop bumper assemblies and others.
In Stock$0.59 -
Opto board 10 LED assembly
New opto board 10 LED assembly. Replaces A-20246
In Stock$99.99 -
Plunger & link assembly - later style
Plunger & link assembly for later Bally and Williams machines.
In Stock$5.99 -
Switch - sub-miniature 4" wire lever
Universal snap action submicroswitch with 4 inch wire actuator that can be formed to various shapes.
In Stock$5.49 -
Nut 8-32 esn stop nut
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
In Stock$0.19 -
Connector - IDC green 12 position
.156" spacing 12 position Insulation Displacement style connector
In Stock$2.29 -
Bolt 3/8-16 x 3/4 inch short neck cab. hinge
Special short neck black carriage bolt for cabinet / backbox hinge.
In Stock$1.29 -
Slingshot arm
Slingshot crank arm assembly
In Stock$9.99 -
Ribbon Cable - 34 pin 3.75 inch WPC/95 MPU
34 pin 3-3/4 inch long 2 connector ribbon cable used for CPU to Driver Board c...
In Stock$12.99 -
Plunger - pop bumper
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
In Stock$4.99 -
Spring - extension diverter plunger
Spring - extension diverter plunger
In Stock$0.79 -
LED - red light emitting diode
Popular red LED used on many machines including: Bally ATTACK FROM M...
In Stock$0.59 -
Flipper opto plastic interruptor BLACK
Flipper opto plastic interruptor BLACK
In Stock$2.99 -
Connector - IDC red 9 position 9R MT/END 22/156
9 position Insulation Displacement Connector (IDC) 22 ga 9R MT/END 22/156
In Stock$1.49 -
Flap - ball gate
Flap - ball gate
In Stock$10.99 -
Flipper opto plastic interrupter white USE 03-9001 black
Williams / Bally white plastic opto interrupter used on flipper cabinet opto boards. Replaced by 03-9001
For Reference -
Opto assembly - IR Receiver BLACK
Infrared receiver assembly in the black plastic housing.
In Stock$7.99 -
Trim - speaker panel H channel
The "H" channel is the black plastic trim between backglass and...
In Stock$12.49 -
Switch - sub-miniature 3 inch flat lever
A universal snap action sub-microswitch with flat blade lever
In Stock$8.99 -
Plunger link & crank pawl - right
Right side flipper unit Plunger- link-crank assembly
In Stock$9.99