Williams INDIANA JONES (Williams) Parts
The following parts are known to work in Williams INDIANA JONES (Williams).
-
Plunger link & crank pawl - right
Right side flipper unit Plunger- link-crank assembly
In Stock$9.99 -
E-clip for 3/16" shaft 20A-8712-18
E-clip or e-ring commonly used on many 3/16" mechanism shafts
In Stock$0.29 -
Flipper opto board WMS/Bally
Williams / Bally Fliptronic Flipper opto board for Fliptronics 2 games
Out Of Stock$35.99 -
Flipper assembly Williams Fliptronic left
Williams WPC pinball system Fliptronic II complete flipper mechanism. Includes FL-116301 coil.
In Stock$64.99 -
LED - IR diode EMITTER QED123
LED-IR diode Bally/Williams WPC system
In Stock$0.99 -
Spacer spool #8
Spacer spool used on Williams/Bally pinball machines.
In Stock$1.99 -
Leg - 28-1/2 inch Black smooth set of 4
Set of 4 standard black durable processed smooth finish 28-1/2 inch ribbed leg.
In Stock$129.99 -
IC - 24 pin DIP Static RAM 6116LP XO-928
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Out Of Stock$8.99 -
PINSKIN™ Pinball Cover - Exhibit wide
New PINSKIN� brand pinball covers provide storage protection from UV rays,...
Out Of Stock$69.99 -
GI Update Cable kit for WMS WPC Games
General Illumination update cable kit for WMS WPC Games
In Stock$39.99 -
Ribbon Cable - 34 pin 23.5 inch 4 connector
23-1/2 inch ribbon cable with four 34 Pin connectors for Williams WPC CPU-Flip. Replaces 5795-1318-00
In Stock$26.99 -
Rollover switch & bracket assembly kit
Rollover switch & bracket assembly kit
In Stock$12.99 -
Tilt mechanism Assembly
Tilt mechanism Assembly
In Stock$41.99 -
WPC bracket backbox mounting hinge set
Left and right side black metal hinge bracket for Bally / Williams WPC games.
In Stock$34.99 -
Z coil bracket B-7572-1
Coil bracket for pinball machine kicker and slingshot assemblies
In Stock$9.99 -
Lamp socket & #44 bulb with diode USE A-17807
Lamp socket & #44 bulb with diode USE A-17807
For Reference -
Torx® wrench key T-20 tamper resistant
Special tamper resistant long arm Torx® key for size T-20
In Stock$6.29 -
Acetate instruction/score card cover 3.25 x 6
Acetate instruction/score card cover 3.25 x 6 inches
In Stock$1.49 -
Glass playfield 23.75 x 43 x 3/16 inches wide
Playfield glass for Wide Body pinball machine measures 23-3/4 x 43 x 3/16 inches
In Stock$129.99 -
Machine Screw 6-32 x 3/8" p-rwh
Machine Screw 6-32 x 3/8 inch long phillips with round washer head.
In Stock$0.29 -
Test Fixture Williams System WPC/95 lamp matrix
Test Fixture Williams System WPC/95 lamp matrix
In Stock$34.99 -
Drop target assembly Williams single
Single bank drop target assembly for WPC system Williams pinball machines.
In Stock$115.99 -
Rollover switch & bracket assembly
Rollover switch assembly. Includes bracket and sub miniature snap action...
In Stock$8.99 -
Hole guard - switch slot 1-1/4 inch USE HG-SS125C
Hole guard - switch slot 1-1/4 inch
Out Of Stock$21.99 -
Infared LED Opto set Williams/Bally
Infared LED Opto set Williams/Bally
In Stock$12.99 -
Opto board - emitter 7 LED
7 ball trough LED emitter assembly
In Stock$39.99 -
Coil sleeve - 1/2 x 1-7/8 inch
Coil sleeve measuring 1/2 x 1-7/8 inch. Reference: Gottlieb 5065
In Stock$0.99 -
Coil stop - flipper Williams
Flipper coil stop for 1987 Williams F-14 TOMCAT, SPACE STATION, FIRE!, BIG...
In Stock$3.49 -
Opto IR Receiver board
Williams/Bally opto InfraRed receiver board used in LED assembly A-16909...
Out Of Stock$6.49 -
Coil - relay
Coil - relay
In Stock$21.99 -
Leaf switch - jet bumper SW11A-37
Pop bumper Leaf switch assembly for most solid state pinball machines.
In Stock$9.99 -
Secondary cable - transformer to backbox H-14582
Wiring harness for Williams / Bally WPC secondary cable. Substitute for H-14582
For Reference -
WPC High Voltage satellite board A-14039
WPC High Voltage satellite board A-14039
In Stock$63.99 -
Target Switch - round red front mount
Target Switch - round red front mount
In Stock$12.99 -
Rubber grommet
Rubber grommet - 3/8 inch OD
In Stock$0.79 -
Lamp socket - wedge base
IDC lamp socket used in System 11 and newer pinball machines. Reference:...
For Reference -
Trim side channel - 17 inch glass edge
Williams/Bally WPC pinball machine backglass side trim 17 inch long.
In Stock$4.99 -
Damper plug grommet 1 inch round blue
Damper plug grommet 1 inch round blue
In Stock$2.79 -
Pin-Buddy™ Game Saver Cantraption™ 180°
Pin-Buddy™ Game Saver Cantraption™ 180°
Out Of Stock$19.99 -
Machine Screw 6-32 x 2-1/2" p-rwh
Machine Screw 6-32 x 2-1/2" long phillips with round washer head.
In Stock$0.39 -
Sheet Metal Screw #4 x 1/2 inch pop bumper cap
#4 x 1/2 inch long round-head sheet metal screw pop bumper cap
In Stock$0.29 -
Opto IR detector/receiver
Infrared photo transistor receiver T1 & 3/4.
In Stock$2.99 -
Kicker arm slingshot assembly
Kicker arm slingshot assembly
Out Of Stock$44.99 -
Coil sleeve - 2-1/16"
Nylon coil sleeve - 2-1/16 inch
In Stock$0.99 -
INDIANA JONES (Williams) Jackpot board
Backbox Jackpot Lighting Kit for Williams INDIANA JONES pinball machine...
In Stock$39.99 -
IC - 28 pin DIP NVRAM FM1608-120
IC - 28 pin DIP NVRAM FM1608-120
In Stock$19.99 -
Diverter plunger and spring 2-9/16 inch
Diverter plunger and spring 2-9/16 inch
In Stock$9.99 -
Capacitor 0.01uf 50v +80-20 axial
Capacitor 0.01mf 50v +80-20 axial
In Stock$0.59 -
Lamp socket - wedge PCB mount
Lamp socket with 3 terminals PCB mount horizontal
In Stock$1.29 -
Coil - solenoid
Common solenoid coil used on many manufacturers pinball machines...
In Stock$19.99 -
AC line filter 5VK1
AC power line filter 5VK1
Out Of Stock$24.99 -
INDIANA JONES (Williams) Motor Path Of..
Williams INDIANA JONES Path of Adventure Motor and Gearbox assembly.
In Stock$179.99 -
PAL nut 5/8 inch
PAL nut 5/8 inch. Replaces 02-3000 & 240-5003-01
In Stock$0.99 -
Pivot nut 7/8 inch
Pivot nut 7/8 inch
In Stock$4.49 -
Machine Screw 2-56 x 7/16 inch p-ph-s
Small phillips pan-head screw used to secure most playfield switches.
In Stock$0.29 -
Pricing cards USA (2)
2 piece set of Bally/Williams price cards for 3 and 5 ball play. Re...
In Stock$3.99 -
Bracket - Coil Retaining mounting
Coil retaining bracket
Out Of Stock$1.79 -
Trim - playfield 23" wide-body notched
Rear 23" black plastic playfield glass TRIM MOLDING with notch used on pinball Bally / Williams machines
In Stock$7.99 -
Post stud #6 x 1-7/8 inch wood screw 02-4426-1
Playfield stud with wood screw bottom and 6-32 machine thread top.
In Stock$2.29 -
INDIANA JONES (Williams) target decals
This is the 4 piece set of peel & stick vinyl Idol target decals for the W...
In Stock$10.99