Bally SAFE CRACKER Parts
The following parts are known to work in Bally SAFE CRACKER.
-
Flipper crank bolt with flat 90 degree notch washer modified
Flipper crank bolt with flat 90 degree notch washer modified for use on flipper pawl.
For Reference -
Nut 3/8-16 hex 9/16 flat to flat 7/32 inch thick
Nut 3/8-16 hex 9/16 flat to flat 7/32 inch thick
In Stock$0.39 -
Rivet - .125 x .187 x .218 inch brass
Rivet - .125 x .187 x .218 inch brass
In Stock$0.29 -
Screw adjust assy
Screw adjust assy
Out Of Stock$29.99 -
Machine Screw 8-32 x 1/4" pl-hh-s
Machine Screw 8-32 x 1/4" pl-hh-s
In Stock$0.29 -
Twin nut plate - switch stack
Twin nut plate - switch stack. Replaced by 01-9321
For Reference -
Snap ring external retaining .375 inch
Snap ring external retaining .375
In Stock$0.39 -
EX-PLAS #8 x 1" ind pl-hwh
EX-PLAS #8 x 1" ind pl-hwh
In Stock$0.29 -
Machine Screw 8-32 x 5/8 inch ph t-r Torx®
Machine Screw 8-32 x 5/8 inch ph t-r Torx®
In Stock$0.89 -
Sheet Metal Screw #8 x 1/2" p-pn type 25
Sheet Metal Screw #8 x 1/2" p-pn type 25
In Stock$0.50 -
Machine Screw 5-40 x 1/4 inch p-ph
Machine Screw 5-40 x 1/4 inch p-ph
In Stock$0.19 -
Washer .187 x .625 x .059 inch #8
Washer .187 x .625 x .059 inch #8
In Stock$0.39