Bally REVENGE FROM MARS Parts
The following parts are known to work in Bally REVENGE FROM MARS.
-
Tubing-clear 1-1/2"
Tubing - clear 1-1/2" Reference: 23-6716-2
In Stock$0.49 -
Washer 0.265 inch x 0.500 inch x 0.032 inch
Flat washer 0.265 inch x 0.500 inch x 0.032 inch
In Stock$0.19 -
Foam rubber strip 3/4 wide x 1/4 thick per inch
Foam rubber strip 3/4 wide x 1/4 thick per inch - black
In Stock$0.29 -
Bracket - microswitch
Switch mounting bracket with 3/16 inch mounting holes
In Stock$6.49 -
REVENGE FROM MARS (Bally) popper bracket
Williams REVENGE FROM MARS ball popper weldment bracket.Reference: A...
In Stock$101.99 -
Ball trough assembly complete
Complete Williams WPC pinball machine ball trough assembly with opto board...
For Reference -
Connector 2 position .062 inch terminals
2 position receptacle with no mounting ears uses .062 inch crimp terminals.
In Stock$0.29 -
Rivet - semi tubular - steel zinc
Semi-tubular rivet - 0.122 inch x 0.218 inch 0.187 inch - steel zinc
In Stock$0.19 -
Transformer - Williams Pinball 2000 RFM
Transformer - Williams Pinball 2000 RFM
In Stock$295.99 -
Guard - ball guide
Ball guide guard (Bally/Williams)
In Stock$7.49 -
Connector 4 pin .062 inch terminals
4 position plug uses .062 inch crimp terminals. Reference: 5791-10774-...
In Stock$0.99 -
Twin nut plate - switch stack
Plate with two holes to mount and protect sub miniature switches.
In Stock$2.49