Bally ADDAMS FAMILY GOLD Parts
The following parts are known to work in Bally ADDAMS FAMILY GOLD.
-
Flipper crank bolt with flat 90 degree notch washer modified
Flipper crank bolt with flat 90 degree notch washer modified for use on flipper pawl.
For Reference -
Lock washer #6 split
Lock washer #6 split
In Stock$0.19 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
Sheet Metal Screw #8 x 1/2 inch ind pl-hwh
One of the most commonly used screws in Williams/Bally pinball machines.
In Stock$0.29 -
Resistor - 220 ohm 1/2 watt
Resistor - 220 ohm 1/2 watt
In Stock$0.29 -
Resistor .22 ohm 1 watt 5%
Resistor .22 ohm 1watt 5% tolerance
In Stock$0.39 -
Resistor .12 ohm 10w 5%
Cement resistor 0.12 Ohm 10W 5% Tolerance Reference: 5012-12632-00
In Stock$2.99 -
Resistor 1.8k ohm 5w 5%
Resistor 1.8k ohm 5 watt 5%
For Reference -
Resistor 120 ohm 5w 5% USE R5W120
Resistor 120 ohm 5w 5%. Replaced by R5W120
For Reference -
Resistor 4.7K ohm 5 watt 5%
Resistor 4.7 kohm 5 watt 5%Reference: 5012-12843-00
For Reference -
Thermistor - 8amp 2.5 R25
Thermistor - 8amp 2.5 ohm R25 The thermistor is installed in the power...
In Stock$2.79 -
Varistor MOV 130v 10J metox 10a
Metal Oxide Varistor (MOV), 130 Volt Used in the input power line.
In Stock$1.49