Bally WORLD CUP SOCCER 1994 Parts
The following parts are known to work in Bally WORLD CUP SOCCER 1994.
-
Label - Install 5 balls
Label for lockbar receiver mechanism on Williams WPC pinball machines with...
In Stock$0.79 -
Machine Screw 8-32 x 1/2" p-rh-sems
Machine screw 8-32 thread x 1/2" long phillips round head with sems extern...
Out Of Stock$0.29 -
stand up sw assy
stand up sw assy
For Reference -
WORLD CUP SOCCER (Bally) Manual - Original
WORLD CUP SOCCER (Bally) pinball machine manual.
For Reference -
Machine Screw 8-32 x 1-3/4 inch p-ph
Machine Screw 8-32 x 1-3/4 inch p-ph
In Stock$0.19 -
WORLD CUP SOCCER (Bally) Rubber BLACK
This is the 60 piece BLACK rubber ring set for Bally WORLD CUP SOCCER '94...
In Stock$24.99 -
WORLD CUP SOCCER (Bally) Decal ramp
Bally WORLD CUP SOCCER pinball machine under ramp decal.
In Stock$6.00 -
WORLD CUP SOCCER (Bally) Goalie plastic
Bally WORLD CUP SOCCER Goalie playfield plastic
In Stock$7.99 -
Pop bumper raised center cap - teal
Raised center jet bumper cap transparent teal. Replaced by 03-8254-25
For Reference -
Resistor 4.7K ohm 5 watt 5%
Resistor 4.7 kohm 5 watt 5%Reference: 5012-12843-00
For Reference -
Protective Cap
Williams Protective Cap. Used on: ATTACK FROM MARS BUGS BUNNY BLACK...
For Reference -
Lit Frames 90s Williams-Bally
Lit Frames 90s Williams-Bally
In Stock$219.99 -
Hex spacer 1/4 f-f 8-32 x 1-1/2 inch
Hex spacer 1/4 inch post female-female 8-32 x 1-1/2 inch
In Stock$1.99 -
Machine Screw 8-32 x 1/2" pl-hh-s
Machine screw 8-32 x 1/2" long unslotted 1/4" drive hex head with external...
In Stock$0.39 -
Fliptronic II board Williams WPC
Fliptronic II board Williams WPC
For Reference -
Bracket - ball gate coil
Ball gate coil metal bracket Williams / Bally
In Stock$8.49 -
Roll pin 1/8 x 7/16 inches 20A-8716-5
1/8 diameter x 7/16 inches length slotted spring roll pin. USE 20-8716-5
For Reference -
WORLD CUP SOCCER (Bally) Coin Toss Cover
Coin Toss plastic cover for Bally WORLD CUP SOCCER.
In Stock$6.99 -
Glass corner protectors - Set of 2
Glass corner protectors - Set of 2
In Stock$5.99 -
rollover sw assy w/zinc bracket
rollover sw assy w/zinc Bracket
In Stock$12.99 -
Eject cam mounting bracket assembly
Eject cam mounting bracket assembly. Reference: A-18146
Out Of Stock$18.99 -
Post - star double teal 1-1/16
Post - star double teal 1-1/16 inch
In Stock$0.89 -
Resistor 1.8k ohm 5w 5%
Resistor 1.8k ohm 5 watt 5%
For Reference -
Crystal 10 Mhz
Crystal 10.0 MHz Reference: 5520-13301-00
In Stock$3.99 -
Target switch - oblong orange
Williams / Bally Orange Oblong stationary Target switch with front mount b...
In Stock$8.99 -
WORLD CUP SOCCER (Bally) Coin toss assy
coin toss exit assy
For Reference -
Connector IDC 8r mt/end 22/.100
Connector IDC 8r mt/end 22/.100
In Stock$2.99 -
Sheet Metal Screw #8 x 5/8 inch pl-hwh-a
Sheet Metal Screw #8 x 5/8 inch pl-hwh-a
In Stock$0.29 -
Machine Screw 6-32 x 1" pl-hwh
Machine Screw 6-32 x 1" pl-hwh
In Stock$0.39 -
Connector plug 5 position .062 inch terminal
5 position plug uses .062 inch crimp terminals.
In Stock$0.99 -
Machine Screw 10-32 x 7/8 inch p-ph-s
Machine Screw 10-32 x 7/8 inch p-ph-s
In Stock$0.29 -
WORLD CUP SOCCER (Bally) Spinner decal
Bally WORLD CUP SOCCER pinball machine peel & stick spinner decal. Refere...
In Stock$2.99 -
Connector 5 position .062 inch terminals
5 position receptacle with mounting ears uses .062 inch crimp terminals.
In Stock$2.99 -
Flat washer .2031 x .625 x .105 inches modified
Washer - modified crank washer
In Stock$0.39 -
Wire hinge pin
Wire hinge pin. Use 20-6530-D cotter pin.
For Reference -
WORLD CUP SOCCER (Bally) Decal "Pass"
WORLD CUP SOCCER (Bally) Decal "Pass"
In Stock$2.99 -
Hex spacer 1/4" f-f 8-32 x 2-1/4"
WMS 2.25" Long Post used in the following games: Williams FUNHOUSE Ba...
In Stock$4.99 -
cashbox sub assy parts
cashbox sub assy parts
In Stock$8.99 -
Hex spacer 1/4 inch f-f 8-32 x 2-1/2 inch
Hex spacer 1/4 inch f-f 8-32 x 2-1/2 inch
In Stock$3.99 -
Rivet - 1/8 inch shaft diam X 5/32 length
Rivet brass - 1/8 inch shaft diameter x 5/32 inch shaft length
In Stock$0.19 -
WORLD CUP SOCCER (Bally) Handbook
This is the 13 page 5-1/2 x 8-1/2 inch Operator's Handbook that accompanies th...
In Stock$7.99 -
WORLD CUP SOCCER (Bally) Post Kit
WORLD CUP SOCCER (Bally) Post Kit
In Stock$47.99 -
IC - 16 pin DIP sync. 4-bit counter 74HC161
Integrated circuit 74HC161
In Stock$0.99 -
WORLD CUP SOCCER (Bally) Plastic
Bally WORLD CUP SOCCER pinball machine playfield plastic. Refer...
For Reference -
WORLD CUP SOCCER (Bally) Steel flap
Bally WORLD CUP SOCCER Spring Steel Flap.
In Stock$8.99 -
WORLD CUP SOCCER (Bally) Goal bracket
Bally WORLD CUP SOCCER Goalie bracket.
In Stock$17.99 -
Machine Screw 6-32 x 7/8" p-ph-sems
Machine screw with 6-32 thread and 7/8" long with phillips pan head and in...
In Stock$0.29 -
Bracket-ball gate
Bracket-ball gate
In Stock$11.99 -
Sheet Metal Screw #4 x 1/2 nch p-ph
Sheet Metal Screw #4 x 1/2 nch p-ph
In Stock$0.29 -
Washer 0.70" x 1.19" x 0.09"
Flat washer 0.70" x 1.19" x 0.09" thick.
In Stock$0.29 -
Lamp holder medium bayonet base
Bayonet lamp holder for #89 and similar base bulbs. Replaced by 077-5101-00
For Reference -
WORLD CUP SOCCER (Bally) Ramp set (2)
WORLD CUP SOCCER (Bally) Ramp set (2)
Out Of Stock$399.99 -
Pin-Buddy™ Game Saver Cantraption™ 45° LIGHT BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° LIGHT BLUE
In Stock$19.99 -
WORLD CUP SOCCER (Bally) Backbox tech chart
WORLD CUP SOCCER (Bally) Backbox tech chart
In Stock$9.99 -
WORLD CUP SOCCER (Bally) Plastic clear
Bally WORLD CUP SOCCER pinball machine clear playfield plastic.
In Stock$3.00 -
Hex spacer 1/4" post m-f 8-32 x 5/8"
Used in Williams JACKBOT, JOHNNY MNEMONIC, and Bally WORLD CUP SOCCER...
In Stock$4.49 -
Leaf switch - kicker
Leaf switch - kicker
For Reference -
WORLD CUP SOCCER (Bally) Ribbon cable kit
4 piece set of ribbon cables for Bally WORLD CUP SOCCER pinball machine.
In Stock$39.99 -
WORLD CUP SOCCER (Bally) Decal playfield top
WORLD CUP SOCCER (Bally) Decal playfield top
In Stock$3.99 -
IC - 3 pin TO-92 -5v regulator LM79L05
IC - 3 pin TO-92 -5v regulator LM79L05
In Stock$0.89