Bally WORLD CUP SOCCER 1994 Parts
The following parts are known to work in Bally WORLD CUP SOCCER 1994.
-
Hinge assembly upper insert
Hinge assembly upper insert
In Stock$16.99 -
Spring - extension armature plate
Spring - extension armature plate.
In Stock$0.99 -
Speaker 6-1/2 inch - 4 ohm woofer
6-1/2 inch outer diameter 4 ohm woofer speaker used in many pinball machine and video cabinets
Out Of Stock$29.99 -
Tape double sided .032 x 3/4 inch x 9 ft
Tape double sided .032 x 3/4 inch x 9 ft
In Stock$13.99 -
Lamp socket and diode assembly
Lamp socket and diode assembly
In Stock$5.99 -
Nut 6-32 keps
Keps nut 6-32 with attached external tooth lockwasher.
In Stock$0.29 -
Screw - 6-32 X 1-1/2" finned shank black
6-32 X 1-1/2" black spiral fin shank steel screw.
For Reference -
Lamp holder
Lamp holder assembly. Reference: A-17835
In Stock$5.95 -
Capacitor 0.1uf 50v +/-20 axial Z5U
Axial capacitor 0.1UF 50v +/-20 axial Z5U temperature coefficient.
In Stock$0.19 -
Sheet Metal Screw #8 x 1/2 inch ind pl-hwh
One of the most commonly used screws in Williams/Bally pinball machines.
In Stock$0.29 -
Rivet - 1/8 x 7/32 inch 7/32 oval head
Rivet - 1/8 inch shaft diameter x 7/32 inch shaft length. 7/32 oval head
In Stock$0.29 -
Nut 8-32 ESNA/NTM stop nut
Stop nut 8-32 thread.
In Stock$0.19 -
Plug - male 3 position
3 position plug uses .093" diameter crimp terminals.
In Stock$0.29 -
Connector - IDC orange 9 position
9 position Insulation Displacement Connector (IDC).
In Stock$2.99 -
Bolt carriage 1/4-20 x 1-1/2" RH black
Carriage bolt has 1/4-20 thread and is 1-1/2" long with a round head and b...
In Stock$0.79 -
Magnet bracket and pole piece assembly
Magnet bracket and pole piece assembly.
In Stock$20.99 -
Machine Screw 6-32 x 3/16" p-ph-sems
Machine screw with 6-32 thread and 3/16" long with phillips pan head and attached lockwasher.
In Stock$0.39 -
Williams Coil bracket
Common knocker coil bracket used in many Williams games.
In Stock$10.99 -
Switch miniature - spinner
Miniature snap-action switch. 1-1/2" blade with hole
In Stock$14.99 -
Dot matrix controller board WPC
Dot matrix controller board WPC
For Reference -
Spring - extension
Spring - extension
In Stock$1.19 -
Opto board 7 way A-15576 A-15595 5768-12921-05
Opto board 7 way A-15576 A-15595 5768-12921-05
In Stock$79.99 -
Connector - IDC green 7 position
Connector - 7 position insulation displacement style with passthrough...
In Stock$1.99 -
Button - rollover red transparent
Button - rollover transparent red - replaces: 03-9103.1-9 and 03-9103.1-08
In Stock$3.99 -
Rivet - 1/8 x 1/4 inches nickel
Rivet - 1/8 x 1/4 inches nickel
In Stock$0.19 -
Eject shield - violet
Violet eject shield plastic for kicker and saucer holes. Reference:...
In Stock$4.99 -
Switch miniature 1-3/4" bent end lever
Miniature snap action switch with 3 terminals and custom wireform.
In Stock$21.99 -
Connector 2 position .062 inch terminals 045-5107-02
2 position connector uses .062 inch crimp terminals.
In Stock$0.49 -
Post stud #8 x 2-1/16 inch wood screw
Post stud #8 x 2-1/16 inch wood screw with 6-32 top
For Reference -
Resistor SIP 10 pin 4.7k 9r 10 5%
Single inline 10 pin resistor network 4.7k 9r 10 5%
In Stock$2.99 -
Machine Screw 2-56 x 3/8 inch p-ph-s
Machine screw with 2-56 thread and 3/8 inch long with phillips pan head.
In Stock$0.29 -
Ball guide - bottom arch fence
Williams/ Bally pinball machine wire ball guide - bottom arch fence used i...
For Reference -
WORLD CUP SOCCER (Bally) Rollover button assembly
WORLD CUP SOCCER (Bally) Rollover button assembly
For Reference -
Washer .265 x .500 x .067 inch
Washer 0.265 inch x .500 inch x .067 inch
In Stock$0.19 -
E-clip for 3/8 inch shaft - ball shooter rod
Fits shaft diameter of 3/8 inch with grove diameter of 5/16 inch.
For Reference -
Dome - Yellow flash lamp - twist-lock
Yellow plastic twist-lock mini dome for flash lamps.
In Stock$1.99 -
Kicker mounting bracket with 3/16 inch holes
Kicker mounting bracket used on many Williams and Ball/Williams pinball ma...
In Stock$5.99 -
Fish paper display shield dot matrix Williams
Dot Matrix Display fish paper rear shield for WPC-95 games.
In Stock$9.99 -
Service outlet snap-in three prong WPC s
Snap-in service outlet used in WPC games. AC inlet IEC PMT 3P. Fits into...
In Stock$2.79 -
WORLD CUP SOCCER (Bally) Ramp front
Bally WORLD CUP SOCCER Plastic Ramp.
For Reference -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. measured at the o...
In Stock$0.49 -
Logic power cable WPC
Logic power cable for Williams WPC pinball machines. Reference: H-15...
For Reference -
T-Nut 8-32 1/4" barrel - 19/32" base
1/4" tall barrel and 8-32 thread with 19/32"" base or flange.
In Stock$0.29 -
IC 16 pin DIP DAC AD1851 16 bit mono
Integrated circuit 16 pin DIP AD-1851 16 bit mono audio PCM.
For Reference -
Connector 2 position .093" terminals
2 position plug with no mounting ears uses .093" crimp terminals.
In Stock$1.49 -
Connector - IDC orange 13 position
13 position Insulation Displacement Connector (IDC).
In Stock$7.49 -
Plate - spacer cabinet slide
Plate - spacer pinball machine cabinet slide. Reference: 01-11408
In Stock$9.99 -
Invisiglass playfield 21 x 43 x 3/16 inch standard
Standard pinball playfield Invisiglass.
In Stock$259.99 -
Bolt carriage 10-24 x 2-1/4 inch black
Bolt carriage 10-24 x 2-1/4 inch black
In Stock$1.29 -
Machine Screw 8-32 x 3/4" ph TPR Torx®
Machine Screw 8-32 x 3/4" TPR Security Torx® - pan head 4008-01093-12B
In Stock$0.79 -
Target switch - oblong red
Williams / Bally red Oblong stationary target switch with front mount brac...
In Stock$8.99 -
Coil - solenoid--no diodes
3 terminal, dual winding solenoid coil for diverter assemblies
In Stock$26.99 -
Coil bracket no spring hooks
Williams coil bracket used on most late model Williams and Bally/Williams.
In Stock$4.99 -
Lane guide - 1-3/4 inch teal transparent
Transparent teal green Williams / Bally style lane guide
In Stock$2.49 -
Machine Screw 8-32 x 3/8" p-flh
Machine screw 8-32 thread x 3/8" long phillips flat head.
In Stock$0.19 -
Nut 4-40 esn
Nut 4-40 thread with elastic stop.
In Stock$0.19 -
Bracket - playfield service support
Bracket - WPC playfield service support
In Stock$38.99 -
Armature
Armature. Reference: A-15821
In Stock$15.99 -
Capacitor 15000 uF 25v radial snap
Capacitor 15,000 mf 25 volts snap mount. Suitable replacement for 5040-12313-00.
In Stock$4.49 -
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
In Stock$19.99