Bally SCARED STIFF Parts
The following parts are known to work in Bally SCARED STIFF.
-
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. measured at the o...
For Reference -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. Replaced by 20-8712-43
For Reference -
Flipper crank bolt with flat 90 degree notch washer modified
Flipper crank bolt with flat 90 degree notch washer modified for use on flipper pawl.
For Reference -
Nut 3/8-16 hex 9/16 flat to flat 7/32 inch thick
Nut 3/8-16 hex 9/16 flat to flat 7/32 inch thick
In Stock$0.19 -
Machine Screw 4-40 x 3/16" p-ph-s
90087A105
In Stock$0.29 -
Washer .172 x .437 x .032 inches
Washer .172 x .437 x .032 inches
In Stock$0.29 -
Rivet - .125 x .187 x .218 inch brass
Rivet - .125 x .187 x .218 inch brass
In Stock$0.29 -
Machine Screw 4-40 x 5/16 inch p-ph-s black
Machine Screw 4-40 x 5/16 inch p-ph-s black
In Stock$0.39 -
EX-PLAS #8 x 1-1/2" ind pl-hwh
EX-PLAS #8 x 1-1/2" ind pl-hwh
In Stock$0.39 -
Sheet Metal Screw #6 x 5/8 inch p-ph t-25
Sheet Metal Screw #6 x 5/8 inch p-ph t-25
In Stock$0.49 -
Twin nut plate - switch stack
Twin nut plate - switch stack. Replaced by 01-9321
For Reference -
EX-PLAS #8 x 1" ind pl-hwh
EX-PLAS #8 x 1" ind pl-hwh
In Stock$0.29