Flipper rebuild kit Williams 1988-1991 A-13524-1

All-new replacement flipper rebuild kit is the answer for sticky, sluggish, weak, or dead flippers.

Includes parts to rebuild both left and right flipper units.

Designed for non-Fliptronic® 2/1988 - 8/1991 Williams and Bally machines that use NORMALLY CLOSED (contacts are touching when flipper is at rest) end-of-stroke switches and spark-suppression capacitors. Check your game manual for correct flipper description.

Flipper feeler gauge included to assist in adjusting the bearing-to-crank gap.

The factory recommends installing flipper kits every half-million flips to keep your flippers performing to specification. Use the diagnostic menu in your game under STANDARD ADJUSTMENTS to access the flipper count meters.

Parts included in this kit

• (1) B-10655-R - Plunger & crank assembly WPC early right

• (1) B-10655-L - Plunger & crank assembly WPC early left

• (2) A-12111 - Coil stop

• (2) 10-376 - Spring

• (2) 03-7811 - Leaf switch End of Stroke normally closed ASW-A20-1

• (4) 4010-01066-06 - Cap screw 10-32 x 3/8 inch sh flip bracket F...

• (4) 4701-00004-00 - Lock washer No.10 steel reg split L/W zinc 244...

• (2) 03-7066-5 - Coil sleeve

• (2) C2.2M250VA-NP - Capacitor 2.2 uF 250v axial NP yellow 125-50...

• (2) 77-CT6-1 - Cable tie 6 inch single

• (1) 03-8194 - Flipper Gauge

Reference:

• A-13524-1