Small twist-in wedge base socket for #555 wedge base lamps. Replaces 077-5007-00
This is the standard pop bumper socket with solid flat 4" leads used in all Bal...
Large twist-in socket for #906 wedge base lamps.
Lamp socket with bracket holds wedge based bulbs such as #555
Quality lamp socket fits small bayonet bulbs such as #44s and #47s...
Lamp socket & #44 bulb with diode USE A-17807
IDC lamp socket used in System 11 and newer pinball machines. Reference:...
Clear plastic mounting receptacle with riveted wedge lamp base socket
Lamp socket with 3 terminals PCB mount horizontal
A quality, medium bayonet lamp socket that fits bulbs such as #89 flasher.
This reflector and lamp socket assembly has a silver finish interior.
Lamp socket and diode assembly
Lamp holder assembly. Reference: A-17835
Bally CREATURE FROM THE BLACK LAGOON pinball machine quartz Hologram lamp only used in upgrade kits.
Dome receptacle base - clear
Medium base (larger than #44 lamp) lamp socket with 3/4 inch bracket
Lamp socket for wedge base lamps. Reference: 24-8804
Lamp socket bayonet 3 terminal with #44 lamp
Lamp socket and #89 bulb assembly. Reference: A-8798
Socket and #555 lamp
Bally THEATRE OF MAGIC trunk lamp socket and cable assembly. USE H-20007.1
Snap-in lamp socket holds wedge based miniature lamps
Lamp socket with bulb for Williams/Bally pinball machine
Lamp socket assembly with #906 lamps. Reference: A-17802
Lamp socket - long bracket
Single flash lamp assembly A-20158 5768-14565-00
3 #555 Lamps & twist sockets are included.
Coin door lamp holder
Center reflector lamp & cable assembly 4 pin. Black exterior and silver i...
Light board lay-down socket. Use 24-8805
Lamp holder assembly for large base bayonet bulb such as #89. Replaced by 077-5100-00
Pop bumper socket & bulb for pinball machine. USE 24-8776
Lamp socket with diode for Williams/Bally pinball machine. Reference:...
Bally JUDGE DREDD bracket, black (A-16909) opto, white (A-16908) opto
Silver reflector with lamp & 3 pin 18" cable. Reference: 04-12756-1...
socket-ring
socket & #89 bulb assy
A quality medium-bayonet lamp socket that fits bulbs such as #89 flashera
Bayonet lamp holder for #89 and similar base bulbs. Replaced by 077-5101-00
Reflector flash lamp with 12 inch cable
Lamp socket and #44 bulb assembly with diode
Bally/Williams lamp socket assembly
Lampholder
Socket and #89 bulb assembly. Reference: A-9359
Lamp socket - medium bayonet base 1-5/8 inch
Lamp socket with harness. Reference: A-11541
Lamp holder
Socket & bulb USE 077-5026-01
Lamp socket with #44 lamp. Reference: A-11734
Socket & #44 bulb assembly. Reference: A-8882-1 #44
T1-3/4 wedge base sub-mini lamp socket pcb mount.
Lamp socket & #44 bulb
socket w/o diode-white
Light strip assembly 6 bank 7-1/4 inch
socket-w/o diode
Light strip assembly 8 bank 10 inch
Reflector flash lamp with 16 inch cable
Light strip assembly 9 bank 11 inch