Stern GODZILLA PRO (Stern) Parts
The following parts are known to work in Stern GODZILLA PRO (Stern).
-
Ball 1-1/16 inch standard pinball
Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
In Stock$2.99 -
Ball 1-1/16 in, Standard Pinball, 5-Pack Tube
Standard carbon steel 1-1/16" diameter, 80 gram pinball
In Stock$9.99 -
Glass playfield 21 x 43 x 3/16 inch standard
Standard pinball playfield tempered glass.
In Stock$99.99 -
Switch - flipper cabinet normally open
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
In Stock$9.99 -
Ring and rod
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
In Stock$6.99 -
Pop bumper skirt - white
Commonly used pop bumper skirt, or wafer, used in all contemporary machines
In Stock$1.49 -
Flipper rebuild kit - Sega / Stern
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
In Stock$47.99 -
Coil - solenoid no diode
Common solenoid coil with no diode.
In Stock$13.49 -
Coil - solenoid no diode 090-5044-ND
Common solenoid coil used on many manufacturers pinball machines.
In Stock$16.99 -
Cashbox - black plastic
Black plastic cashbox used in most solid state pinball machines
In Stock$14.99 -
Coil stop assembly
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
In Stock$5.99 -
Leg - 30-1/2 inch black textured
Leg - 30-1/2 inch black textured
In Stock$26.99 -
Spring - compression pop bumper 10A-7
Spring - compression pop bumper 10A-7
In Stock$0.99 -
Pin-Buddy™ combo kit
Pin-Buddy™ combo kit
In Stock$49.99 -
Spring - barrel compression 3/4" shooter
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
In Stock$1.49 -
Grommet
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
In Stock$0.39 -
Pop bumper base
Standard pop bumper base
In Stock$1.99 -
Nut 6-32 esn stop nut
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
In Stock$0.19 -
Shaker motor kit Stern SPIKE system
Shaker motor kit Stern SPIKE system
In Stock$129.99 -
Spring washer 1/2 inch inner diameter
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
In Stock$0.89 -
Switch - micro roller actuator
E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01
In Stock$5.99 -
Pin-Buddy™ Game Saver Cantraption™ 45°
Pin-Buddy™ Game Saver Cantraption&tm 45°
In Stock$19.99 -
Side rail plastic glass channel Sega/DE/Stern 42-5/8 inch
Sega / Data East / Stern Playfield black plastic playfield glass support R...
In Stock$14.99 -
Washer .390 x .625 x .059 inch shooter
Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.
In Stock$0.29 -
Flipper & shaft - generic WHITE
White 3 inch molded flipper with a 2-2/16 inch shaft...
Out Of Stock$5.49 -
Coil - solenoid flipper Stern no diode
Coil - solenoid flipper Stern no diode
In Stock$25.99 -
Glass corner protectors - Set of 2
Glass corner protectors - Set of 2
In Stock$9.99 -
Lift trim 26 inch black plastic 3/16 inch channel
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
In Stock$6.99 -
Reflector - spotlight lamp
Mini spotlight reflector cover for lamp socket assemblies
In Stock$2.49 -
Plunger - pop bumper
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
In Stock$4.99 -
Flipper bushing 1/4 inch ID white
Flipper bushing DE/Sega/Stern
In Stock$2.89 -
Ball shooter rod 7-5/8 inch black knob
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
In Stock$15.99 -
E-clip for 3/16" shaft 20A-8712-18
E-clip or e-ring commonly used on many 3/16" mechanism shafts
In Stock$0.29 -
Spring - compression 1-1/2"
Spring used on relay for VUK and Lazer Kicker.
In Stock$1.99 -
Plunger & Link
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Out Of Stock$8.99 -
Guard - shooter lane Stern
Guard - shooter lane Stern
In Stock$7.99 -
Pinball Event Tune-Up Kit
Pinball Event Tune-Up Kit
In Stock$22.50 -
Switch - flip cab "Paliney"
New single flipper button cabinet switch assembly with the new low-arcing.
In Stock$15.99 -
Node board 48 volt 8 driver Stern SPIKE
Node board 48 volt 8 driver Stern SPIKE 2
Out Of Stock$139.99 -
Coil sleeve - 2.69 inch with flange
2.69 inch overall length coil sleeve with 0.187 inch shoulder.
In Stock$0.89 -
Flipper plunger, link & crank assy, left
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
In Stock$16.99 -
Switch - end of stroke Stern
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
In Stock$5.99 -
Flipper plunger, link & crank assy, right.
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
In Stock$16.99 -
Pop bumper body - Data East/Stern
Data East\Stern pop bumper body.Substitute for 03-7443-5.
In Stock$2.99 -
Switch - VUK vertical up kicker
Vertical Up Kicker (VUK) sub-mini snap action microswitch
In Stock$9.99 -
Hole guard - switch slot 1-1/4 inch USE HG-SS125C
Hole guard - switch slot 1-1/4 inch
Out Of Stock$21.99 -
Spring - extension flipper return
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
In Stock$0.69 -
Speaker 4 inch - 8 ohm 4 watt shielded
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
In Stock$8.99 -
Speaker 8 inch - 4 ohm woofer
4 ohm speaker 8 inch round
In Stock$33.99 -
Bracket - coil front
Coil support bracket.
In Stock$1.79 -
Machine Screw 8-32 x 1/4" p-ph-sems
Machine screw 8-32 X 1/4" pan head phillips sems. Many applications. Used...
In Stock$0.19 -
Motor - shaker (041-5029-01) RoHS
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
In Stock$79.99 -
FUSE - SLOW BLOW 8 amp (6.3 x 32mm)
FUSE - SLOW BLOW 8 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
In Stock$3.49 -
Bumper - rubber 1 inch diameter
Black rubber push-in plug bumper with 1 inch diameter
In Stock$1.29 -
Machine Screw 6-32 x 3/8" p-ph
Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.
In Stock$0.19 -
Coil sleeve - 1-15/16 inch long with 1/4 inch flange
Nylon coil sleeve
In Stock$1.29 -
Cashbox lid - metal with handle
Metal cash box lid with handle for 545-5090-00 plastic cashbox.
In Stock$21.99 -
Switch - rocker on/off
AC power on/off black plastic rocker switch used on late model Stern games
In Stock$10.99 -
GODZILLA (Stern) Custom Topper
GODZILLA (Stern) Custom Topper
In Stock$1,049.99 -
Trim playfield glass 20-3/8 x 1/2 inches
Trim playfield glass 20-3/8 x 1/2 inches Sega
Out Of Stock$12.99