Head bolt 3/8-16 x 1-1/2 inch acorn head 5/8 inch
Kit allows you to replace the original CRT monitor with practically a...
Bolt carriage 8-32 x 1-1/4 inch black
Data East insert panel circuit board standoff with barbed end
Coin Door Security bar kit - no drill
Nail-on furniture glide allows sliding without cabinet damage. Flat beige plastic base.
T-Nut 10-32 x 7/16 x 3/4 inch base
Black finish special cabinet T-nut with hex drive end.
Slide & pivot support bracket right
Williams MEDIEVAL MADNESS pinball machine screw pin
T-nut 10-32 thread with black oxide
Flat black washer .465" outer diameter x .20" inner diameter x .032 thick.
Spiral nail .15 inch dia. x 1/2 inch tr-hd
Edge slide bracket used on Stern pinball machines
Dowel pin 3/32 x 7/16 inch
Hinge assembly lower insert
Bracket - insert hinge mounting
Button head fastener. Reference: 02-4546 Williams DEMOLITION MAN...
Peel & stick adhesive backed Kwik Klip cable and wire harness holder.
Carriage bolt 1/4-20 x 1-1/4" 4320-01123-20B
New, high quality brass finish 3/8-16 thread with 5/8 inch acorn head .
Slotted hasp plate/bar. Used on games such as Bally REVENGE FROM MARS...
Plastic strain relief bushing used for AC power cords
Hinge - pivot left --13 inch
Ball shooter mounting plate secures the ball shooter housing from inside t...
Cable clamp 3/4 inch
Hinge - pivot right - 13 inch
3/32" diameter x 3/8" length slotted spring roll pin. Reference: 20...
Screw #8 x 5/8" p-ph black
Sheet metal screw #8 x 1/2 inch sl-hwh-ab zinc
Locking cam plate - backbox & insert bd.
Coin door security bar hasp staple bracket. Use with 01-14085.1 hinge bracket.
Spring washer 3/8" inner diameter and 1/2" outer diameter commonly used on...
Hex head bolt with 3/8-16 thread and 3-1/2 inch overall length used to secure pinball backbox to lower cabinet.
Hex head bolt with 3/8-16 thread and 2 " overall length used to securepi...
New black baked-enamel ball shooter cover for most late model Bally/Willia...
Bracket - insert stop
Spring clip for Gottlieb tilt bob.
Cable clamp 1-1/2 inch single hole mount
Nut - spacer hex 1/2" OD 1/4-20 x 1/2 inch
Bolt carriage 10-24 x 5/8 inch black
Bolt carriage 10-24 x 1-1/4 inch black
Post fastener 2 1/16 inches long with 8-32 thread on both ends and a hex nut
Coin door security bar hasp hinge bracket. Use with 01-14086.1 staple brac...
Hex head bolt with 3/8-16 thread and 4-1/2 inch overall length used to secure pinball backbox to lower cabinet.
Replacement smooth wire rod used in the swinging pendulum tilt mechanism
Tilt wire with hook 4.75 inch overall
Metal pivot bracket for Gottlieb pinball machines. Reference: 25657...
lever guide assy
Playfield service support slide U bracket upgrade kit for late model Stern SPIKE and SPIKE 2 System pinball machines.
Snap rivet - plastic 1/8 x 1/8 inch
Hex head bolt with 3/8-16 thread and 3" overall length used to securepin...
Metal spacer 1/2 x 3/8 inch
Pivot Nut 7/16 inch Reference: 02-4244
Bracket - slide backbox insert latch
Slide and pivot support bracket for left side. Used on Stern pinball ma...
Machine Screw 8-32 x 1-3/4 inch p-ph
Fish paper insulator for terminal strips. Reference: 01-12299
Carriage bolt 10-24 x 1-3/4 inch course thread size
Bracket - AC power switch Data East / Sega
