Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Pinball machine cabinet interior leg bolt mounting plate.
Graphite plumb bob used on many tilt switch assemblies.
Leg bolt 3/8-16 X 2-3/4 inch acorn head black
Hex spacer 1/4 x 1-1/4 inch f-f
Cable clamp 1/2 inch diameter single
EZ slide & playfield support bracket set
Cable clamp Holder 1/4" diameter
Bolt carriage 8-32 x 1-1/4 inch black
Data East insert panel circuit board standoff with barbed end
Slide & pivot support bracket right
Edge slide bracket used on Stern pinball machines
Dowel pin 3/32 x 7/16 inch
Cable clamp 3/4 inch
Nut - spacer hex 1/2" OD 1/4-20 x 1/2 inch
Bolt carriage 10-24 x 5/8 inch black
Replacement smooth wire rod used in the swinging pendulum tilt mechanism
Metal spacer 1/2 x 3/8 inch
Bracket - slide backbox insert latch
Slide and pivot support bracket for left side. Used on Stern pinball ma...
Bracket - AC power switch Data East / Sega
Backbox hinge set Data East 11.5 inch
Screw # 8 X 1 SM Tamperproof Torx® SST, backbox. Stern black torx screw.
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/4 inch length.
Universal tilt bob hanger bracket. Reference: 535-5238-02
Replaced by 4410-01132-00
Hinge - no pin
Tilt wire with hook 4.30 inches
Springrip push nut fastener 3/32 inch
E-clip or e-ring commonly used on most playfield mechanisms. Replaced by 20-8712-25
Dowel pin 1/8 x 1.5 inch
Sheet Metal Screw 6 x 1/2 inch slotted hex washer head ab. Replaced by 4106-01088-08
Nickel plated plumb bob used on many tilt switch assemblies.
Slide and pivot support bracket set. Used on Stern pinball ma...
Case of 600 leg bolts 3/8-16 thread with 5/8 inch acorn head and 2-1/4 inch length.
