8r mt/end 18/156
Stand up switch & bracket assembly.
Insulator - fishpaper switch blade
Bracket - slide support
Nut 8-32 esn NM stop nut black
6 position female housing receptacle with no mounting ears uses .062 inch crimp terminals
Lamp holder assembly for large base bayonet bulb such as #89. Replaced by 077-5100-00
Target switch L bracket 95° red
Fish paper opto shield
Terminal strip assembly used in WPC Williams/Bally series games Referen...
6 position plug uses .062" crimp terminals.
Yellow plastic starburst mini-dome with screw tabs used on many pinball ma...
Machine Screw 8-32 x 1" pl-hh-s USE 4008-01003-16
Bally / Williams pinball machine 2 pin solenoid coil connection cable
Bally CORVETTE pinball machine ramp guard
Slotted 1/4" hes head machine screw with 8-32 thread x 1-1/4" long with...
Nut 3/8-16 esn stop nut M-319-7
Bally CORVETTE Translite has multiple scratches.
Machine screw with 4-40 thread and 1/4 inch long with phillips flat head.
1/4" drive 8-32 x 1-1/2" long unslotted Indented Hex Washer Head screw
Williams/Bally Eject assembly
rollover sw assy w/zinc Bracket
IC - 3 pin TO-92 5v regulator LM78L05
Machine Screw 6-32 x 3/16 inch p-ph
Foam rubber protector 14 inches long - black
Machine screw 6-32 thread x 3/8 inch long. Replaced by 4006-01003-06
6r mt/end 18/156
15 position receptacble with no mounting ears uses .093 inch crimp terminals.
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/4 inch length.
Sheet Metal Screw #8 x 1-1/2" p-ph-a
Connector 6 pin .093 inch terminals
Machine Screw 8-32 x 3/8 inch p-ph-brass
IC - 3 pin TO-92 -5v regulator LM79L05
Machine Screw 8-32 x 1-3/4 inch p-ph
Fliptronic II board Williams WPC
Pin-Buddy™ Game Saver Cantraption™ 45° LIGHT BLUE
Right side playfield wireform gate.
Williams Protective Cap. Used on: ATTACK FROM MARS BUGS BUNNY BLACK...
Fish paper insulator for terminal strips. Reference: 01-12299
Roll pin 1/16 x 5/16 inch
Switch mounting plate for Bally/ Williams WPC System pinball machines.
Machine screw 8-32 thread x 1/2" long phillips round head with sems extern...
Machine screw with 6-32 thread and 7/8" long with phillips round head...
Integrated circuit 24 pin DIP 74HC4514 4T016 decoder with latch
CORVETTE (Bally) Engine Wires
Ball gate actuator assembly
Relay coil no diode
CORVETTE (Bally) Playfield
Target switch L bracket 85° black
Sheet Metal Screw #8 x 5/8 inch pl-hwh-a
Machine screw with 4-40 thread and 3/16" long with phillips pan head sems
Bally CORVETTE pinball machine track limit opto board assembly.
Bolt 1/4-20 x 1" hex head.
Ball gate coil metal bracket Williams / Bally
Connector with no mounting ears 9 position uses .062" terminals
Integrated circuit 74HC161
2-5/8" overall length wire hinge pin with flat end for ball gate flap asse...
Sheet metal screw #6 x 3/8" long phillips pan head.
1/8 diameter x 7/16 inches length slotted spring roll pin. USE 20-8716-5
Connector IDC 8r mt/end 22/.100