USE 4-640426-1
Williams/Bally pinball machines left side flipper mounting plate. Replaced by C-16103-L
Power junction box WPC-S & WPC-95
Sheet Metal Screw #6 x 3/8 inch p-ph t-25
Screw - wood #5 x 7/8 inch p-flh
Label - Caution High Voltage (bottom arch)
4 x 1/2 inch sheet metal screws Phillips flat head.
Washer .203 x .625 x .059 inches
Coil mounting bracket used on: Attack from Mars Cactus Canyon Champ...
New Stainless Steel playfield glass trim molding
Carriage bolt 10-24 x1-1/4 inch long zinc plated.
Box - line filter chasis
Rivet - 1/8 inch diameter x 9/16 inch
Zinc plated stopnut 10-24 thread with nylon insert.
Spacer - 5/8 inch plastic
Machine Screw 8-32 x 1" long pan head phillips with external tooth lockwas...
Left side flipper crank assembly. Reference: A-17050-L 01-8073-L...
Washer nylon spinner 0.07 inch wire
Machine screw with 4-40 thread and 5/16" long with phillips pan head and i...
AC power switch - rocker DPST
Hex socket head cap screw has 10-32 partial thread and length of 1-1/4 inches.
Sheet Metal Screw #4 x 3/8" p-ph
Single pin male connector. Uses 5020-09078-00 crimp terminal
4 position receptacle with no mounting ears uses .062 inch crimp terminals
CORVETTE (Bally) LED lamp kit
Zinc plated 8-32 x 1-3/4 inch long unslotted hex washer head machine screw.
Washer .172 x .437 x .059 inches
Machine screw with 6-32 thread and 1-1/2 inch long with phillips pan head.
Safety switch bypass device for servicing Bally/Williams WPC System games.
Red IDC Connector - 3R mt end 22/156
Williams / Bally Red Oblong Stand up Target with rear mount bracket.Used...
2 position receptacle with no mounting ears uses .093" crimp terminals.
nut 5-40 hex
Connector IDC 12r mt/end 22/.100
9 pin connector uses .093 inch crimp terminals
Capacitor 470 pf @ 100v axial measures .1" diameter x .1" wide x .2" lengt...
Connector IDC 9r mt/end 22/.100
Standard snap-in Nyliner® bearing bushing with 1/4 inch Inner Diameter
CORVETTE (Bally) Playfield plastic set
Carriage bolt #8-32 X 1-1/8 inch black. Use 4308-01123-20 as a substitute. This bolt is zinc plated not black.
Bracket - interlock dual switch
4 position plug uses .062" crimp terminals.
Wood screw #5 x 1inch long phillips round head.
Washer .203 x .437 x .032 inch
Pin-Buddy™ Game Saver Cantraption™ 45° Neon Green Translucent
Integrated circuit MPU 2105kp - 40 adsp
Sheet Metal Screw #6 x 1-1/4 inch p-flh-a
Post - star double red 1-1/16 inch
Bally CORVETTE pinball machine racetrack opto board set upgrade kit.
Lamp socket - long bracket
Hinge assembly lower insert
Rivet - 1/8" diameter x 1/2"
Spring - extension lever guide
Switch mounting bracket with 3/16 inch mounting holes
Williams black powder coat Lock Down molding bar. Used on Bally CORVETT...
11mm x 66.2mm plunger used on divertor mechanisms.
3 position receptacle with no mounting ears uses .062" crimp terminals.
Black finish 10-32 x 1/4 inch set screw with locking compund patch. 3/32 inch drive.
Outlet-iec conn 237 socket. Reference: 5851-13867-00
Wire hinge pin. Reference: 12-6882-1
