#5 sheet metal screw 5/8 inch long is used to secure EOS on flipper assemblies...
Battery 1.5v AA alkaline for CPU board memory.
Machine Screw 8-32 x 1" TPR Torx - pan head. T-15
Bracket clip for many late model Bally / Williams WPC machines. Refere...
Thermostat 85° C with leads 5644-09368-00
Yoke metal - pop bumper substitute 01-5492
Washer - zinc plated- 0.125 x .281 x .032 inch rivet back
Extension spring used for relay armatures.
Spring - extension
Opto holder - white
Bracket - speaker panel latch
Knocker cable Bally/Williams
#10 steel split lock washer. Zinc plated.
Nut 8-32 keps
The most common sheet metal / wood screw in late model pinball machines. T...
68B09E MPU 2 Mhz - 40 pin DIP
Cabinet bolt backing plate used in many Bally/Williams WPC System pinball...
CORVETTE (Bally) ramp
Machine screw with 4-40 thread and 3/8" long with phillips pan head...
Double bumper post 10-32 bottom stud
Bracket - playfied bottom arch support
Glass playfield bundle.
Capacitor 10 mfd non polarized 50v +-20% tolerance with axial leads.
Nylon spinner washer fits most contemporary pinball spinning targets...
Lamp socket for wedge base lamps. Reference: 24-8804
2 position receptacle with no mounting ears uses .062 inch crimp terminals.
Semi-tubular rivet - 0.122 inch x 0.218 inch 0.187 inch - steel zinc
Steel zinc 6 X 3/4 unslotted sheet metal screw.
4 position plug uses .062 inch crimp terminals. Reference: 5791-10774-...
3 position receptacle with no ears
Battery contact. Reference: 01-10884
Pop bumper yoke Washer .141 x .437 x .032 inch
Resistor .22 ohm 1watt 5% tolerance
Sheet metal screw #6 X 3/8" plain hex washer head. Zinc plated steel...
USE 02-4676
Machine Screw 8-32 x 3/8" pl-hh-s
Pop bumper skirt - red transparent
Circuit board mounting bracket for under playfield boards.
Nut 1/4-20 Flangrip
Plate with two holes to mount and protect sub miniature switches.
Cable clamp Holder 1/4" diameter
.156" spacing 7 position Insulation Displacement style connector. 7r...
Momentary door interlock switch Cherry E79
IDC connector 7r mt/end 22/156
Ball gate and armature assy. Reference: A-11146 b/g armature assy...
Socket and #555 lamp
Pushbutton 1 inch round green 'Start'
Machine screw with 6-32 thread and 5/8" long with phillips pan head and in...
Cable clamp 3/4 inch diameter single
Amber dome with screw tabs
Frame & eyelet assembly. Reference: A-6892
Gear cluster used in Bally CACTUS CANYON and Bally CORVETTE Williams MONST...
Save 50% on 10 or more pieces.
Machine screw with 4-40 thread and 3/8 inch long with phillips flat head.
AC line filter 5 amp with IEC connector.
3 position plug uses .062 inch crimp terminals.
Connector - 6 position insulation displacement style with passthrough...
Coil bracket with 4 spring retainer tabs and 3 notches.
Heatsink TO-220 transistors 6030B PB1-36CB
Spring - compression master