Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Heavy duty 3 prong grounded 15 amp 110v AC power cord replacement plug
Ten-bulb box of #44 high quality miniature incandescent lamps.
Barrel shaped, bright finish shooter spring used on many brand...
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
3 terminal, dual winding flipper coil is used on the following games:...
Standard pinball playfield tempered glass.
Standard keyed-alike single bit 7/8 inch long barrel lock with chrome bezel fi...
All-new flipper parts kit is the answer for sluggish flipper assemblies. 8/1993-10/1998
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
Ten-bulb box of #555 high quality miniature lamps
3 terminal, dual winding replacement flipper coil for the following Willia...
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Universal Ball Shooter rod with black plastic knob. Used on all Williams /...
Backbox lock and plate assembly for all of the Williams and Bally WPC syst...
Nylon flipper bushing is used on Williams Pinball games
Plastic thickness gauge for adjusting flipper bushing gap
Common compression spring used on flippers, pop bumper, ball kickers, ball poppers.
Williams/Bally WPC system standard domestic 2 chute Coin Door with WPC adapter.
Key hook used on most coin door interiors.
Rear black plastic playfield glass trim molding used on most Bally/Williams games.
Common solenoid coil with no diode.
Ten-bulb box of #89 high quality miniature incandescent lamps.
Flipper return and drop target return spring
WPC Power Driver board rebuild kit
Williams original style white plastic pop bumper body
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Slingshot switch used on many brands of electronic pinball machine kicker. Replaces SW-1A-114.
Small twist-in wedge base socket for #555 wedge base lamps. Replaces 077-5007-00
Sub miniature snap action switch with 3 terminals and custom wireform actuator.
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
Metal yoke fits all pop bumper ring and rod assemblies.
Pushbutton 1-1/8 inch red with internal spring
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Ten-bulb box of #906 High quality miniature incandescent lamp. May be replaced with 05-906W LED or 04-0912 bulbs.
27 inch long Black Plastic LIFT TRIM used on the bottom of the backglass.
Trough anti magnetic shim - Williams/Bally upgrade
Black lock with one key, lock washer, 1inch cam, and screw. Used for b...
This is a flipper unit END OF STROKE (EOS) switch used on Williams / Bally...
Application Specific Integrated Circuit (ASIC) chip for Williams/Bally WPC
WING SCREW or WING BOLT used on late model WPC system games.
Spring - barrel compression shooter black
Red transparent pop bumper cap
3/8-16 hex machine screw nut, steel & zinc 5/8 across flats
This is the standard pop bumper socket with solid flat 4" leads used in all Bal...
Fiber yoke fits all pop bumper ring and rod assembles.
Compression spring used in many different assemblies. Replaces 266-500...
Reset Fix Board WPC Power Driver
New replacement WPC Type 2 Electronic / Opto flipper boards
Hairpin retaining clip used to secure shafts and studs on many mechanical assemblies.
Pin-Buddy™ combo kit
Thermistor - 8amp 2.5 ohm R25 The thermistor is installed in the power...
Later style coil stop used in Williams/Bally games from 08/1993 to 06-1999...
Coil sleeve - 2-1/16 inch with 3/16 inch flange
Red star post 1-1/16 inch common to late model Bally / Williams and other brand pinball machines.
Williams/ Bally 02-4352 hex socket T-Nut Pivot Bushing with 1/2" shaft, 3/...
Spring - barrel compression shooter brass
Cashbox nest bracket Williams
Williams / Bally style lane guide (also referred to as Rollover Guides, L...
