Chicago Gaming Company ATTACK FROM MARS REMAKE LE (Chicago Gaming) Parts
The following parts are known to work in Chicago Gaming Company ATTACK FROM MARS REMAKE LE (Chicago Gaming).
-
Washer 0.125 x 0.281 x .032 inch
Washer - zinc plated- 0.125 x .281 x .032 inch rivet back
In Stock$0.59 -
Switch sub-mini assembly
Sub miniature snap action switch with 3 terminals and custom wireform. Use 12-SMSB and trim actuator as needed.
For Reference -
Sheet Metal Screw #6 x 1" pl-hwh
The most common sheet metal / wood screw in late model pinball machines. T...
In Stock$0.19 -
Pop bumper skirt - clear
Pop bumper skirt - clear
In Stock$1.49 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
Washer 0.265 inch x 0.500 inch x 0.032 inch
Flat washer 0.265 inch x 0.500 inch x 0.032 inch
In Stock$0.19 -
Nut 8-32 keps
Nut 8-32 keps
In Stock$0.29 -
Prop-Rod Bracket - clip
Bracket clip for many late model Bally / Williams WPC machines. Refere...
In Stock$7.49 -
Foam rubber strip 3/4 wide x 1/4 thick per inch
Foam rubber strip 3/4 wide x 1/4 thick per inch - black
In Stock$0.29 -
Bracket - playfied bottom arch support
Bracket - playfied bottom arch support
In Stock$12.99 -
Coil sleeve - 1-7/8" with 3/16" flange
Nylon coil sleeve 1-7/8" measured end-to-end with 3/16" flange. Ref...
In Stock$0.79 -
Rivet - semi tubular - steel zinc
Semi-tubular rivet - 0.122 inch x 0.218 inch 0.187 inch - steel zinc
In Stock$0.19