Filter by Category

ADDAMS FAMILY Pinball GX5

Pinball Machine

The following parts are also known to work in ADDAMS FAMILY Pinball GX5 .

Sort by:

Page size:

1 2 3 4 5 6 7 8 9 10 ...

-Plumb bob - casting

Plumb bob - casting

Common tilt plumb bob with 0.15 inch interior diameter for rod.

-Ball shooter lane feeder assembly Williams

Ball shooter lane feeder assembly Williams

Ball shooter lane feeder assembly Williams

-Flipper rebuild kit WMS 2 Left 2 Right

Flipper rebuild kit WMS 2 Left 2 Right

Quad flipper rebuild kit for machines using 2 right and 2 left flipper assemblies includes...

-Backglass trim kit - Williams WPC/System 11

Backglass trim kit - Williams WPC/System 11

Backglass trim kit - Williams WPC/System 11

-Machine Screw 6-32 x 3/8" p-ph-sems

Machine Screw 6-32 x 3/8" p-ph-sems

Machine Screw 6-32 x 3/8" long phillips pan head with external tooth lockw...

-Coil - solenoid no diode

Coil - solenoid no diode

Common solenoid coil used on many manufacturers pinball machines.

-Service switch 4 bank pushbutton

Service switch 4 bank pushbutton

4 pushbutton service switch assembly used Bally / Williams late model coin doors.

-Ribbon Cable - 14 pin 30 inch Display-Cont.

Ribbon Cable - 14 pin 30 inch Display-Cont.

30 inch 14 pin 2 connector Data & Control ribbon cable with Display to Do...

-Lane guide - 2-1/8 inch red A-9394

Lane guide - 2-1/8 inch red A-9394

Lane guide - 2-1/8 inch red A-9394

-Pop bumper skirt - red

Pop bumper skirt - red

Red pop bumper skirt, or wafer, used in most manufacturers' pop bumper.

-Ground braid 1/4 in wide - per foot

Ground braid 1/4 in wide - per foot

Wire 1/4" ground braid

-Lamp socket - Wedge base

Lamp socket - Wedge base

Lamp socket with bracket holds wedge based bulbs such as #555

1 2 3 4 5 6 7 8 9 10 ...