Bally BUGS BUNNY Parts
The following parts are known to work in Bally BUGS BUNNY.
-
#4004-01003-10Machine Screw 4-40 x 5/8" p-ph-sMachine screw with 4-40 thread and 5/8" long with phillips pan head
In Stock$0.39 -
#03-7655-8Cable clamp 1/2 inch diameter singleCable clamp 1/2 inch diameter single
In Stock$0.39 -
#02-3972-1Plunger - drop target reset2-1/2" plunger overall length with a 10-32 thread stud
In Stock$6.99 -
#03-8324-5Pop bumper base Midway 0017-00042-0452Pop bumper base for Bally/Midway mid 1980's machine. Mates with C-470-5 body.
In Stock$24.99 -
#A-9465-LBall gate & wire assemblyBall gate & wire assembly
In Stock$19.95 -
#4105-01019-10Sheet Metal Screw #5 x 5/8 inch p-rh-a#5 sheet metal screw 5/8 inch long is used to secure EOS on flipper assemblies...
In Stock$0.29 -
#4010-01062-10Machine Screw 10-32 x 5/8" sl-bnd-hd-brassBrass slotted machine screw 10-32 thread 5/8" long.
In Stock$0.59 -
#12-6231Wireform - tilt plumb bob threadedPlumb bob tilt wire is used on many Bally Williams and other machines.
In Stock$1.49 -
#4700-00003-00Washer 0.125 x 0.281 x .032 inchWasher - zinc plated- 0.125 x .281 x .032 inch rivet back
In Stock$0.59 -
#4106-01115-16Sheet Metal Screw #6 x 1" pl-hwhThe most common sheet metal / wood screw in late model pinball machines. T...
In Stock$0.19 -
#5647-12693-11Switch sub-mini assemblySub miniature snap action switch with 3 terminals and custom wireform. Use 12-SMSB and trim actuator as needed.
For Reference -
#4700-00072-00Washer 0.265 inch x 0.500 inch x 0.032 inchFlat washer 0.265 inch x 0.500 inch x 0.032 inch
In Stock$0.19