Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Standard carbon steel 1-1/16" diameter, 80 gram pinball
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Ten-bulb box of #89 high quality miniature incandescent lamps.
Common solenoid coil used on many manufacturers pinball machines.
Black plastic cashbox used in most solid state pinball machines
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
White non-wedge drop target common to most Data East, Sega, and new Stern pinball machines.
CPU/Sound Board for late model Stern pinball machines with White Star syst...
Pin-Buddy™ combo kit
USE AE-23-800-01 as an equivalent substitute
Automatic ball-launcher kicker mechanism is used on later-model Stern pinball machines
Flipper coil with diode for solid state flipper systems.
Leg - 30-1/2 inch black textured
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Pinball Event Tune-Up Kit
Hole guard - switch slot 1-1/4 inch
Pin-Buddy™ Game Saver Cantraption&tm 45°
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Data East / Sega/ Stern flipper coil
Glass corner protectors - Set of 2
Complete shooter assembly includes housing, shooter rod, inner green spring.
Sub-miniature snap action switch with fork Y-lever actuator. Replaces 180-...
Fluorescent lamp starter for F-14-15-20 watt lamps. FS-22 replaces FS-2
Coil - solenoid flipper Stern no diode
Transistor N channel 100v 20a Mosfet TO-220 110-0088-00
Set of left and right side black metal side armor rails.
Data East/Sega/Stern 26-1200 solenoid coil with diode
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Display power supply board Whitestar/SAM
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
MOSFET transistor driver N channel 100V - 0.07 ohm - 22A
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
IC - 28 pin DIP NVRAM FM1608-120
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Pin-Buddy™ Game Saver Cantraption™ 180°
Right flipper assembly with 090-5030-OT coil. Reference:Stern NASC...
Newton ball and stud
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
Late model Sega & post 2000 Stern pinball machines includes...
Standard pinball playfield Invisiglass.
Opto transmitter / receiver amplifier board for Stern pinball machines.
Dual opto transmitter board assembly with grommets.
Clear plastic playfield post or standoff is 1-1/16 inch. Replaced by 03-7542-13
Data East / Sega / Stern trip coil
Sub miniature snap action switch with 3 terminals and custom wireform
Black mylar cabinet pivot bolt cover disc for Sega and Stern pinball machi...
Clear tempered backglass for Sega/ Stern pinball machines measures 26 x 19 x 1/8 inch
Glass playfield bundle.
Foam target switch pad .44 x .44 x .125 inch
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
Coil - solenoid and diode 25-1240 DE/Stern
ToPs Tournament (Stern) Beta Brite LED sign Pinball Topper
1/4 inch hex spacer post - female/female 6-32 thread taps at bothe ends 3/4 inches long.
Protect plate for many sub-mini microswitch bodies.
