Williams JACKBOT Parts
The following parts are known to work in Williams JACKBOT.
- Prev
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- Next
-
#01-12356Bracket - microswitchSwitch mounting bracket with 3/16 inch mounting holes
In Stock$2.49 -
#4701-00004-00Lock washer #10 steel reg split L/W zinc#10 steel split lock washer. Zinc plated.
In Stock$0.10 -
#5010-12427-00Resistor .22 ohm 1 watt 5%Resistor .22 ohm 1watt 5% tolerance
In Stock$0.32 -
#4004-01005-06Machine Screw 4-40 x 3/8" p-phMachine screw with 4-40 thread and 3/8" long with phillips pan head...
In Stock$0.49 -
#01-15218Twin nut plate - switch stackPlate with two holes to mount and protect sub miniature switches.
In Stock$1.99 -
#20-9492Rivnut hex 3/8-16 x .845 inchRivnut hex 3/8-16 x .845 inch
In Stock$2.00 -
#5045-12914-00Capacitor 10 uF @ 50v axial non-polarizedCapacitor 10 mfd non polarized 50v +-20% tolerance with axial leads.
In Stock$1.89 -
#A-13609Drop target 3 bank PCB assembly WilliamsNew design circuit board for 3 bank Williams drop target assemblies
In Stock$34.95 -
#5795-13434-32Ribbon Cable - 14 pin 32 in w/ferrite bead32 in long 14 pin 2 connector Display Data & Control ribbon cable. Replaces 5795-13434-25
In Stock$12.99 -
#20-9534Standoff clipStandoff clip
In Stock$1.89 -
#5792-09110-00Connector 3 position .093 inch terminals3 position receptacle with no ears
In Stock$0.59 -
#5647-12693-11Switch sub-mini assemblySub miniature snap action switch with 3 terminals and custom wireform. Use 12-SMSB and trim actuator as needed.
Out Of Stock