Filter by Category

GILLIGANS ISLAND Pinball GX31

Pinball Machine

The following parts are also known to work in GILLIGANS ISLAND Pinball GX31 .

Sort by:

Page size:

1 2 3 4 5 6 7 8 9 10 ...

-Key hook wire 12A-6230

Key hook wire 12A-6230

Key hook used on most coin door interiors.

-Coil - solenoid no diode

Coil - solenoid no diode

Common solenoid coil with no diode.

-Trim - playfield glass back 20-3/8 inch

Trim - playfield glass back 20-3/8 inch

Rear black plastic playfield glass trim molding used on most Bally/Williams games.

-Leg leveler - 3 inch long

Leg leveler - 3 inch long

Standard pinball machine leg leveler with 3/8 inch -16 thread and 3 inch long shaft

-Lamp #89 Miniature - 10-pack

Lamp #89 Miniature - 10-pack

Ten-bulb box of #89 high quality miniature incandescent lamps.

-Battery holder 3 position AA

Battery holder 3 position AA

Standard Williams / Bally battery holder with through hole circuit board mount terminals.

-Glass playfield 21 x 43 x 3/16 inch HD anti-reflection

Glass playfield 21 x 43 x 3/16 inch HD anti-reflection

HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch

-anyPin NVRAM Battery Eliminator Universal

anyPin NVRAM Battery Eliminator Universal

Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs

-Varistor MOV 130v 10J metox 10a

Varistor MOV 130v 10J metox 10a

Metal Oxide Varistor (MOV), 130 Volt Used in the input power line.

-Leaf switch - slingshot normally open

Leaf switch - slingshot normally open

Slingshot switch used on many brands of electronic pinball machine kicker. Replaces SW-1A-114.

-Thermistor - 8amp 2.5 R25

Thermistor - 8amp 2.5 R25

Thermistor - 8amp 2.5 ohm R25 The thermistor is installed in the power...

-Lamp socket - wedge base small twist-in

Lamp socket - wedge base small twist-in

Small twist-in wedge base socket for #555 wedge base lamps. Replaces 077-5007-00

1 2 3 4 5 6 7 8 9 10 ...