Williams DIRTY HARRY Parts
The following parts are known to work in Williams DIRTY HARRY.
-
Rivet - 1/8 inch shaft diam X 5/32 length
Rivet brass - 1/8 inch shaft diameter x 5/32 inch shaft length
In Stock$0.19 -
Machine Screw 6-32 x 3/4" pl-hwh
Machine Scew 6-32 x 3/4" hex 1/4 drive washer head.
In Stock$0.29 -
Machine Screw 8-32 x 3/8" hh
Machine Screw 8-32 x 3/8" hh
In Stock$0.29 -
Sheet Metal Screw #4 x 1/2 nch p-ph
Sheet Metal Screw #4 x 1/2 nch p-ph
In Stock$0.29 -
Cap Screw 8-32 x 3/8 inch socket head
Cap Screw 8-32 x 3/8 inch socket head
In Stock$0.49 -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. measured at the o...
For Reference -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. Replaced by 20-8712-43
For Reference -
Nut 3/4-16 jam
nut 3/4-16 jam
In Stock$1.29 -
Set Screw 1/4-28 x 3/8 sh-kn-cp
Set screw 1/4-28 x 3/8 inch sh-kn-cp.
In Stock$0.25 -
Machine Screw 8-32 x 5/8" p-flh
Machine screw 8-32 thread x 5/8" long phillips flat head.
In Stock$0.19 -
Flipper crank bolt with flat 90 degree notch washer modified
Flipper crank bolt with flat 90 degree notch washer modified for use on flipper pawl.
For Reference -
Rivet - .125 x .187 x .218 inch brass
Rivet - .125 x .187 x .218 inch brass
In Stock$0.29