Right side flipper unit Plunger- link-crank assembly
Williams / Bally Fliptronic Flipper opto board for Fliptronics 2 games
General Illumination update cable kit for WMS WPC Games
Williams WPC pinball system Fliptronic II complete flipper mechanism. Includes FL-116301 coil.
Spacer spool used on Williams/Bally pinball machines.
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
LED-IR diode Bally/Williams WPC system
New PINSKIN� brand pinball covers provide storage protection from UV rays,...
Test Fixture Williams System WPC/95 lamp matrix
Williams WPC system Motor EMI board. May substitute with A-15543
Made in the USA factory original SILICONE based elastomer lamp covers
23-1/2 inch ribbon cable with four 34 Pin connectors for Williams WPC CPU-Flip. Replaces 5795-1318-00
Playfield glass for Wide Body pinball machine measures 23-3/4 x 43 x 3/16 inches
Coil bracket for pinball machine kicker and slingshot assemblies
Pushbutton 2 inch round red 'Launch Ball'
Acetate instruction/score card cover 3.25 x 6 inches
Machine Screw 6-32 x 3/8 inch long phillips with round washer head.
Special tamper resistant long arm Torx® key for size T-20
Infared LED Opto set Williams/Bally
Rubber grommet - 3/8 inch OD
7 ball trough LED emitter assembly
IC - 28 pin DIP NVRAM FM1608-120
Pin-Buddy™ Game Saver Cantraption™ 180°
Williams/Bally opto InfraRed receiver board used in LED assembly A-16909...
WPC High Voltage satellite board A-14039
Wiring harness for Williams / Bally WPC secondary cable. Substitute for H-14582
Single post bumper #10 with 10-32 thread.
Williams/Bally WPC pinball machine backglass side trim 17 inch long.
Damper plug grommet 1 inch round blue
IDC lamp socket used in System 11 and newer pinball machines. Reference:...
#4 x 1/2 inch long round-head sheet metal screw pop bumper cap
Infrared photo transistor receiver T1 & 3/4.
Capacitor 0.01mf 50v +80-20 axial
Machine Screw 6-32 x 2-1/2" long phillips with round washer head.
Diverter plunger and spring 2-9/16 inch
Clear plastic mounting receptacle with riveted wedge lamp base socket
Lamp socket with 3 terminals PCB mount horizontal
Wood screw #5 x 1-1/2" long, round head steel zinc plated. One of the most...
Small phillips pan-head screw used to secure most playfield switches.
Pivot nut 7/8 inch
PAL nut 5/8 inch. Replaces 02-3000 & 240-5003-01
Rear 23" black plastic playfield glass TRIM MOLDING with notch used on pinball Bally / Williams machines
Williams/Bally pinball machines LEFT playfield slide assembly.
USE 535-5203-03
Playfield stud with wood screw bottom and 6-32 machine thread top.
Common wire ball gate for the Williams/Bally gate assemblies
1/8" diameter x 7/16" length slotted spring roll pin. Reference:...
Coil support bracket.
WPC89 System MPU board
Williams coil plunger for electromechanical chimes. Total length 2-1/2"...
Black 10-32 X 3/8 hex socket head cap screw...
2 piece set of Bally/Williams price cards for 3 and 5 ball play. Re...
Steel zinc plated semi-tubular rivet with 7/32 inch oval head
Machine screw 8-32 X 1/4" pan head phillips sems. Many applications. Used...
Crimp terminal .062 inch male
Switch - kicker.
Twin nut 2 hole spring steel switch stack retainer
Nut with 10-32 thread and elastic stop top (esn) 238-1306-00
Bracket - coil mounting
A quality, medium bayonet lamp socket that fits bulbs such as #89 flasher.
