Williams CONGO Parts
The following parts are known to work in Williams CONGO.
- Prev
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- Next
-
#03-7655-16Cable clamp 1 inch diameter singleCable clamp 1 inch diameter single
In Stock$0.39 -
#A-18617-1Trough opto trans. board 4-ball WilliamsLate model 4-ball transmitter board for Bally/Williams pinball machines. Replaces the A-18617
In Stock$29.99 -
#A-18618-GLMTrough opto recvr. board WPC WilliamsNewly re-designed opto receiver for late model Williams/Bally WPC-S, WPC-9...
For Reference -
#A-20580Coin door interface boardCoin door interface board. Interchangeable with A-20731.
For Reference -
#4406-01117-00Nut 6-32 hex6-32 nut used on Williams flipper plates to secure flipper bushings.
In Stock$0.19 -
#01-8397Bracket - back box toggle latchLatch plated used with tension latch 20-9347 to secure backbox.
In Stock$2.49 -
#A-5387Chime plunger Williams 2-1/2"Williams coil plunger for electromechanical chimes. Total length 2-1/2"...
In Stock$5.99 -
#4106-01033-08Sheet Metal Screw #6 x 1/2 inch p-trh#6 Truss head zinc plated machine screw 1/2 inch long.
In Stock$0.29 -
#4322-01176-20BBolt 3/8-16 x 1-1/4" round head rib neck3/8-16 x 1-1/4 inch round head long rib neck carriage bolt
For Reference -
#02-4668Plunger assembly 3.875 inchesPlunger assembly 3.875 inches 2A-4668
Out Of Stock$15.99 -
#5490-14575-00Opto sensor - flipper - 5 legOpto transmitter & receiver packaged in U-shaped black plastic housing.
In Stock$5.95 -
#4002-01105-08Machine Screw 2-56 x 1/2 inch p-ph-sThis is the small phillips panhead screw used to secure most playfield mic...
In Stock$0.29