Williams ALGAR Parts
The following parts are known to work in Williams ALGAR.
-
Leg bolt 3/8-16 x 2-1/2 inch acorn head 5/8 inch
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
In Stock$1.99 -
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
In Stock$1.29 -
E-clip for 1/4 in shaft 20A-8712-25
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
In Stock$0.29 -
C-clip for 3/8 in shaft - ball shooter rod
C-Clip (C crimp fastener, retaining clip) for most ball shooter rods.
In Stock$0.29 -
Roll pin 1/8" x 7/16" 20A-8716-5
1/8" diameter x 7/16" length slotted spring roll pin. Reference:...
In Stock$0.39 -
E-clip for 5/16" shaft
E-clip or e-ring commonly used on many mechanisms. 5/16" measured at the o...
In Stock$0.39 -
Nut 3/8 - 16 hex 9/16 across flats x 21/64 inch high
Standard 3/8 - 16 steel zinc finished hexnut. 9/16" across flats X 21/64 inch tall
In Stock$0.39 -
Roll pin 1/8 x 7/16 inches 20A-8716-5
1/8 diameter x 7/16 inches length slotted spring roll pin. USE 20-8716-5
For Reference -
Nut 3/8-16 hex 9/16 flat to flat 7/32 inch thick
Nut 3/8-16 hex 9/16 flat to flat 7/32 inch thick
In Stock$0.39