Williams GETAWAY HIGH SPEED 2 (Williams) Parts
The following parts are known to work in Williams GETAWAY HIGH SPEED 2 (Williams).
- Prev
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- Next
-
GETAWAY (Williams) Coil (square spool)
Williams GETAWAY High Speed II pinball machine ball accelerator coil
In Stock$29.99 -
Lamp socket & #89 bulb assembly
Lamp socket and #89 bulb assembly. Reference: A-8798
For Reference -
Washer 0.125 x 0.281 x .032 inch
Washer - zinc plated- 0.125 x .281 x .032 inch rivet back
In Stock$0.39 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.10 -
Connector 4 pin .062 inch terminals
4 position plug uses .062 inch crimp terminals. Reference: 5791-10774-...
In Stock$0.89 -
GETAWAY (Williams) ramp pivot weld assy
Williams GETAWAY pivot ramp weld assembly Reference: A-15081 Us...
For Reference -
Resistor .22 ohm 1 watt 5%
Resistor .22 ohm 1watt 5% tolerance
In Stock$0.32 -
T-Nut 8-32 1/4" barrel - 19/32" base
1/4" tall barrel and 8-32 thread with 19/32"" base or flange.
In Stock$0.39 -
Ball eject assy - right
Complete ball eject assembly for Williams/Bally pinball machine-right side.
Out Of Stock$39.95 -
Machine Screw 4-40 x 3/8" p-ph
Machine screw with 4-40 thread and 3/8" long with phillips pan head...
In Stock$0.49 -
Wireform - tilt plumb bob threaded
Plumb bob tilt wire is used on many Bally Williams and other machines.
In Stock$1.49 -
Connector 3 position .093 inch terminals
3 position receptacle with no ears
In Stock$0.59