Williams INDIANA JONES (Williams) Parts
The following parts are known to work in Williams INDIANA JONES (Williams).
-
Ball 1-1/16 inch standard pinball
Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
In Stock$2.99 -
Dot matrix display for pinball machines
Dot matrix display (DMD) for pinball machines
In Stock$499.99 -
Ball 1-1/16 in, Standard Pinball, 5-Pack Tube
Standard carbon steel 1-1/16" diameter, 80 gram pinball
In Stock$9.99 -
Leg bolt 3/8-16 x 2-1/2 inch acorn head 5/8 inch
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
In Stock$1.04 -
Flipper rebuild kit Williams Fliptronic 8/1993-10/1998
All-new flipper parts kit is the answer for sluggish flipper assemblies. 8/1993-10/1998
In Stock$29.99 -
Coil sleeve - 1/2 x 2-3/16 inch 260-0003-00
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
In Stock$0.99 -
Coil - flipper blue
3 terminal, dual winding replacement flipper coil for the following Willia...
In Stock$25.99 -
Leg - 28-1/2 inch chrome plated
Standard 28-1/2 inch ribbed pinball machine leg with chrome plated finish for Williams...
In Stock$16.99 -
Ring and rod
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
In Stock$6.99 -
Ball shooter rod - black
Universal Ball Shooter rod with black plastic knob. Used on all Williams /...
In Stock$9.99 -
Lock plate & lock kit - backbox Williams
Backbox lock and plate assembly for all of the Williams and Bally WPC syst...
In Stock$10.49 -
Flipper bushing - Williams
Nylon flipper bushing is used on Williams Pinball games
In Stock$1.29 -
Coin door assembly Entropy 2 chute WPC harness
Williams/Bally WPC system standard domestic 2 chute Coin Door with WPC adapter.
In Stock$229.99 -
Flipper gauge
Plastic thickness gauge for adjusting flipper bushing gap
In Stock$0.69 -
Spring - compression 10A-135
Common compression spring used on flippers, pop bumper, ball kickers, ball poppers.
In Stock$0.89 -
Leg bolt plate (Williams)
High quality steel plate replaces Bally / Williams part #01-11400-1
In Stock$8.99 -
Coil - solenoid no diode
Common solenoid coil with no diode.
In Stock$13.49 -
Flipper return and drop target return spring
Flipper return and drop target return spring
In Stock$0.49 -
WPC Power Driver board rebuild kit
WPC Power Driver board rebuild kit
In Stock$57.99 -
Pop bumper body Williams 36mm white
Williams original style white plastic pop bumper body
In Stock$2.49 -
Flipper & shaft - Williams logo white
Flipper & shaft - Williams logo white
In Stock$7.99 -
Varistor MOV 130v 10J metox 10a
Metal Oxide Varistor (MOV), 130 Volt Used in the input power line.
In Stock$1.49 -
Battery holder - plastic style
New style, black plastic, 3 AA cell, circuit board mounted battery holder.
For Reference -
Leaf switch - slingshot normally open
Slingshot switch used on many brands of electronic pinball machine kicker. Replaces SW-1A-114.
In Stock$6.99 -
Lamp socket - wedge base small twist-in
Small twist-in wedge base socket for #555 wedge base lamps. Replaces 077-5007-00
In Stock$1.09 -
Switch - sub-miniature wire actuator
Sub miniature snap action switch with 3 terminals and custom wireform actuator.
In Stock$4.99 -
anyPin NVRAM Battery Eliminator Universal
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Out Of Stock$79.99 -
Pushbutton 1-1/8 inch red
Pushbutton 1-1/8 inch red with internal spring
In Stock$2.99 -
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
In Stock$1.29 -
Yoke metal - pop bumper
Metal yoke fits all pop bumper ring and rod assemblies.
In Stock$0.99 -
Lift Trim - 27 inch x 1/8 Inch Backglass
27 inch long Black Plastic LIFT TRIM used on the bottom of the backglass.
In Stock$6.99 -
Side rail set Williams/Bally 47 inch stainless
Side rail set Williams/Bally 47 inch stainless
In Stock$99.99 -
Lock and cam - 5/8 inch keyed-alike BLACK
Black lock with one key, lock washer, 1inch cam, and screw. Used for b...
In Stock$5.49 -
Trough anti-mag shim Williams/Bally upgrade
Trough anti magnetic shim - Williams/Bally upgrade
In Stock$7.99 -
Foam rubber protector 3/4 x 3/8 x 1/4 inch
Gray foam protector pre-cut pads commonly used in target switches...
Out Of Stock$0.29 -
Wing bolt - 2 inch back box
WING SCREW or WING BOLT used on late model WPC system games.
In Stock$3.69 -
Pop bumper cap - red transparent
Red transparent pop bumper cap
In Stock$2.99 -
IC - ASIC Williams WPC CPU chip
Application Specific Integrated Circuit (ASIC) chip for Williams/Bally WPC
In Stock$104.99 -
Lamp socket pop-bumper straight-wire
This is the standard pop bumper socket with solid flat 4" leads used in all Bal...
In Stock$5.49 -
Switch - End Of Stroke - Normally Open
This is a flipper unit END OF STROKE (EOS) switch used on Williams / Bally...
In Stock$7.49 -
Nut 3/8-16 hex 5/8 inch flat to flat
3/8-16 hex machine screw nut, steel & zinc 5/8 across flats
In Stock$0.29 -
Spring - compression
Compression spring used in many different assemblies. Replaces 266-500...
In Stock$0.59 -
Yoke fiber - pop bumper
Fiber yoke fits all pop bumper ring and rod assembles.
In Stock$1.29 -
Flipper opto board Williams/Bally Type 2
New replacement WPC Type 2 Electronic / Opto flipper boards
In Stock$27.99 -
Reset Fix Board WPC Power Driver
Reset Fix Board WPC Power Driver
In Stock$59.99 -
Coil - flipper orange - medium strong
3 terminal, dual winding flipper coil is used on the following machines:...
In Stock$23.99 -
Thermistor - 8amp 2.5 R25
Thermistor - 8amp 2.5 ohm R25 The thermistor is installed in the power...
In Stock$2.79 -
Lift trim plastic - backglass 30 inch
Standard backglass lift trim with 3/16 inch channel. Trim as needed. Used in...
For Reference -
Coil stop Williams/Bally - later style
Later style coil stop used in Williams/Bally games from 08/1993 to 06-1999...
In Stock$3.99 -
Coil sleeve - 2-1/16 inch with flange
Coil sleeve - 2-1/16 inch with 3/16 inch flange
In Stock$0.99 -
Drop target - Williams black - wedge top
Williams / Bally black plastic drop target with 3/8" wide wedge shaped top...
In Stock$3.49 -
Pivot Bushing - cabinet T-Nut
Williams/ Bally 02-4352 hex socket T-Nut Pivot Bushing with 1/2" shaft, 3/...
In Stock$1.49 -
Cashbox nest bracket
Cashbox nest bracket Williams
In Stock$8.99 -
Lockbar - Williams wide body stainless
Lockdown bar front trim used on all late model wide cabinet size Bally / Williams machines
In Stock$109.99 -
Lane guide - 1-3/4 inch red transparent
Williams / Bally style lane guide (also referred to as Rollover Guides, L...
In Stock$2.49 -
Pin-Buddy™ combo kit
Pin-Buddy™ combo kit
In Stock$49.99 -
High Voltage rebuild kit Williams WPC
21 piece electronic components rebuild kit for the High Voltage section.
In Stock$16.95 -
Bridge rectifier wire lead 35a 400v
35 a wire lead bridge rectifier 5100-09690-00
In Stock$5.99 -
Slit hose sleeve - black 7/8 inch diameter
Black 7/8 inch diameter corrugated plastic slit hose sleeve for wiring harness protection
In Stock$2.79 -
Speaker 6 inch - 4 ohm 25 watt
Common 6 inch speaker used in cabinet bottoms of Williams/ Bally games.
In Stock$14.99