Filter by Category

SAFECRACKER Pinball GX22

Pinball Machine

The following parts are also known to work in SAFECRACKER Pinball GX22 .

Sort by:

Page size:

1 2 3 4 5 6 7 8 9 10 ...

-Lock and cam - 7/8" combination

Lock and cam - 7/8" combination

Standard 7/8" long chrome finish barrel lock with 3 digit adjustable combination

-Flipper opto board WMS/Bally

Flipper opto board WMS/Bally

Williams / Bally Fliptronic Flipper opto board for Fliptronics 2 games

-E-clip for 3/16" shaft 20A-8712-18

E-clip for 3/16" shaft 20A-8712-18

E-clip or e-ring commonly used on many 3/16" mechanism shafts

-Switch - sub-miniature 3 inch flat lever

Switch - sub-miniature 3 inch flat lever

A universal snap action sub-microswitch with flat blade lever

-Flipper opto plastic interrupter white USE 03-9001 black

Flipper opto plastic interrupter white USE 03-9001 black

Williams / Bally white plastic opto interrupter used on flipper cabinet opto boards. Replaced by 03-9001

-IC - 24 pin DIP Static RAM 6116LP XO-928

IC - 24 pin DIP Static RAM 6116LP XO-928

Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00

-LED - IR diode EMITTER QED123

LED - IR diode EMITTER QED123

LED-IR diode Bally/Williams WPC system

-IC - 28 pin DIP NVRAM FM1608-120

IC - 28 pin DIP NVRAM FM1608-120

IC - 28 pin DIP NVRAM FM1608-120

-Post - star double clear 1-1/16 inch tall

Post - star double clear 1-1/16 inch tall

Post - star double clear 1-1/16 inch

-Coil - flipper yellow - low

Coil - flipper yellow - low

3 terminal, dual winding flipper coill is used on the following machines:...

-Z coil bracket B-7572-1

Z coil bracket B-7572-1

Coil bracket for pinball machine kicker and slingshot assemblies

-Flipper & shaft - 2" yellow

Flipper & shaft - 2" yellow

One piece 2 inch small round tip molded yellow flipper with shaft

-Pin-Buddy™ Game Saver Cantraption™ 180°

Pin-Buddy™ Game Saver Cantraption™ 180°

Pin-Buddy™ Game Saver Cantraption™ 180°

-Infared LED Opto set Williams/Bally

Infared LED Opto set Williams/Bally

Infared LED Opto set Williams/Bally

-Acetate instruction/score card cover 3.25 x 6

Acetate instruction/score card cover 3.25 x 6

Acetate instruction/score card cover 3.25 x 6 inches

-Machine Screw 6-32 x 3/8" p-rwh

Machine Screw 6-32 x 3/8" p-rwh

Machine Screw 6-32 x 3/8 inch long phillips with round washer head.

-Rubber grommet

Rubber grommet - 3/8 inch OD

-Coil stop - flipper Williams

Coil stop - flipper Williams

Flipper coil stop for 1987 Williams F-14 TOMCAT, SPACE STATION, FIRE!, BIG...

-Torx® wrench key T-20 tamper resistant

Torx® wrench key T-20 tamper resistant

Special tamper resistant long arm Torx® key for size T-20

-Leg - 28-1/2 inch naked

Leg - 28-1/2 inch naked

New bare metal 28-1/2 inch long Williams style leg ready for your own painting...

-Diverter plunger and spring 2-1/16 inch

Diverter plunger and spring 2-1/16 inch

Diverter plunger and spring 2-1/16 inch

-Leaf switch - jet bumper SW11A-37

Leaf switch - jet bumper SW11A-37

Pop bumper Leaf switch assembly for most solid state pinball machines.

-Opto IR Receiver board

Opto IR Receiver board

Williams/Bally opto InfraRed receiver board used in LED assembly A-16909...

-Mini-post 10-32 thread

Mini-post 10-32 thread

Single post bumper #10 with 10-32 thread.

-Sheet Metal Screw #4 x 1/2 inch pop bumper cap

Sheet Metal Screw #4 x 1/2 inch pop bumper cap

#4 x 1/2 inch long round-head sheet metal screw pop bumper cap

-Damper plug grommet 1 inch round blue

Damper plug grommet 1 inch round blue

Damper plug grommet 1 inch round blue

-Coil sleeve - 2-1/16"

Coil sleeve - 2-1/16"

Nylon coil sleeve - 2-1/16 inch

-anyPin NVRAM Battery Eliminator

anyPin NVRAM Battery Eliminator

NVRAM replacement for 6116, 6264 RAM ICs

-Opto IR detector/receiver

Opto IR detector/receiver

Infrared photo transistor receiver T1 & 3/4.

-Target switch - oblong yellow

Target switch - oblong yellow

Williams / Bally Yellow Oblong stationary Target switch

-Receptacle and wedge socket

Receptacle and wedge socket

Clear plastic mounting receptacle with riveted wedge lamp base socket

-Post stud 8-32 x 2 inches 5/16 drive

Post stud 8-32 x 2 inches 5/16 drive

Steel-zinc stud with #8-32 thread on top and #8-32 thread on bottom

-Bracket - coil front

Bracket - coil front

Coil support bracket.

-Machine Screw 6-32 x 2-1/2" p-rwh

Machine Screw 6-32 x 2-1/2" p-rwh

Machine Screw 6-32 x 2-1/2" long phillips with round washer head.

-Rivnut hex 3/8-16 x .845 inch

Rivnut hex 3/8-16 x .845 inch

Rivnut hex 3/8-16 x .845 inch

-Machine Screw 2-56 x 7/16 inch p-ph-s

Machine Screw 2-56 x 7/16 inch p-ph-s

Small phillips pan-head screw used to secure most playfield switches.

-Bracket - Coil Retaining mounting

Bracket - Coil Retaining mounting

USE 535-5203-03

For Reference

-Roll pin 1/8" x 7/16" 20A-8716-5

Roll pin 1/8" x 7/16" 20A-8716-5

1/8" diameter x 7/16" length slotted spring roll pin. Reference:...

-PAL nut 5/8 inch

PAL nut 5/8 inch

PAL nut 5/8 inch. Replaces 02-3000 & 240-5003-01

-Chime plunger Williams 2-1/2"

Chime plunger Williams 2-1/2"

Williams coil plunger for electromechanical chimes. Total length 2-1/2"...

-Coil - solenoid

Coil - solenoid

Common solenoid coil used on many manufacturers pinball machines...

-Cap screw 10-32 x 3/8

Cap screw 10-32 x 3/8

Black 10-32 X 3/8 hex socket head cap screw...

-Twin nut plate - Tinnerman switch stack

Twin nut plate - Tinnerman switch stack

Twin nut 2 hole spring steel switch stack retainer

-Rivet - 1/8 sft D x 3/16 sft L x 7/32 Head A

Rivet - 1/8 sft D x 3/16 sft L x 7/32 Head A

Steel zinc plated semi-tubular rivet with 7/32 inch oval head

-Machine Screw 8-32 x 1/4" p-ph-sems

Machine Screw 8-32 x 1/4" p-ph-sems

Machine screw 8-32 X 1/4" pan head phillips sems. Many applications. Used...

-Leaf switch - kicker

Leaf switch - kicker

Switch - kicker.

-Crimp terminal .062 inch male

Crimp terminal .062 inch male

Crimp terminal .062 inch male

-Nut 10-32 esn nylock 238-1306-00

Nut 10-32 esn nylock 238-1306-00

Nut with 10-32 thread and elastic stop top (esn) 238-1306-00

-Bracket - Coil mounting

Bracket - Coil mounting

Bracket - coil mounting

-Machine Screw 8-32 x 3/8 inch p-ph-sems

Machine Screw 8-32 x 3/8 inch p-ph-sems

Machine screw 8-32 x 3/8 inch phillips pan head.

-WPC-95 Power Driver board rebuild kit

WPC-95 Power Driver board rebuild kit

WPC-95 Power Driver board rebuild kit

-Opto sensor - flipper - 5 leg

Opto sensor - flipper - 5 leg

Opto transmitter & receiver packaged in U-shaped black plastic housing.

-Plunger - coil

-Bracket - back box toggle latch

Bracket - back box toggle latch

Latch plated used with tension latch 20-9347 to secure backbox.

-Tape double sided .032 x 3/4 inch x 9 ft

Tape double sided .032 x 3/4 inch x 9 ft

Tape double sided .032 x 3/4 inch x 9 ft

-Pop bumper cap - yellow transparent

Pop bumper cap - yellow transparent

Yellow transparent pop bumper cap

-Nut 6-32 hex

6-32 nut used on Williams flipper plates to secure flipper bushings.

-Machine Screw 6-32 x 3/8" p-ph

Machine Screw 6-32 x 3/8" p-ph

Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.

-Trough opto trans. board 4-ball Williams

Trough opto trans. board 4-ball Williams

Late model 4-ball transmitter board for Bally/Williams pinball machines. Replaces the A-18617

-Cable clamp 1 inch diameter single

Cable clamp 1 inch diameter single

Cable clamp 1 inch diameter single

1 2 3 4 5 6 7 8 9 10 ...