Bally REVENGE FROM MARS Parts
The following parts are known to work in Bally REVENGE FROM MARS.
-
Sheet Metal Screw #4 x 1/2 inch pop bumper cap black
Sheet Metal Screw #4 x 1/2 inch pop bumper cap black
In Stock$0.19 -
Nut 8-32 esn NM stop nut black
Nut 8-32 esn NM stop nut black
In Stock$0.39 -
Nut 3/8-16 esn stop nut M-319-7
Nut 3/8-16 esn stop nut M-319-7
In Stock$0.29 -
Bolt 1/4-20 x 1" hh-s
Bolt 1/4-20 x 1" hex head.
In Stock$0.99 -
Roll pin 1/8 x 7/16 inches 20A-8716-5
1/8 diameter x 7/16 inches length slotted spring roll pin. USE 20-8716-5
For Reference -
Rivet - 1/8 inch shaft diam X 5/32 length
Rivet brass - 1/8 inch shaft diameter x 5/32 inch shaft length
In Stock$0.19 -
Sheet Metal Screw #4 x 1/2 nch p-ph
Sheet Metal Screw #4 x 1/2 nch p-ph
In Stock$0.29 -
Sheet Metal Screw #4 x 5/8 inch p-flh-a
Sheet Metal Screw #4 x 5/8 inch p-flh-a
In Stock$0.29 -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. measured at the o...
For Reference -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. Replaced by 20-8712-43
For Reference -
Machine Screw 6-32 x 7/16" p-ph-sems
Machine screw with 6-32 thread and 7/16" long with phillips pan head and i...
In Stock$0.29 -
Rivet - .125 x .187 x .218 inch brass
Rivet - .125 x .187 x .218 inch brass
In Stock$0.29