Bally ADDAMS FAMILY GOLD Parts
The following parts are known to work in Bally ADDAMS FAMILY GOLD.
-
#4010-01062-10Machine Screw 10-32 x 5/8" sl-bnd-hd-brassBrass slotted machine screw 10-32 thread 5/8" long.
In Stock$0.59 -
#23-6716-2Tubing-clear 1-1/2"Tubing - clear 1-1/2" Reference: 23-6716-2
In Stock$0.49 -
#4106-01115-16Sheet Metal Screw #6 x 1" pl-hwhThe most common sheet metal / wood screw in late model pinball machines. T...
In Stock$0.19 -
#5795-10938-15Ribbon Cable - 26 pin 15 inch15 in long 26 pin 2 connector Data & Control ribbon cable
In Stock$13.99 -
#5647-12693-11Switch sub-mini assemblySub miniature snap action switch with 3 terminals and custom wireform. Use 12-SMSB and trim actuator as needed.
For Reference -
#12-6231Wireform - tilt plumb bob threadedPlumb bob tilt wire is used on many Bally Williams and other machines.
In Stock$1.49 -
#4700-00003-00Washer 0.125 x 0.281 x .032 inchWasher - zinc plated- 0.125 x .281 x .032 inch rivet back
In Stock$0.59 -
#4408-01128-00Nut 8-32 kepsNut 8-32 keps
In Stock$0.29 -
#C15KM25VRSCapacitor 15000 uF 25v radial snapCapacitor 15,000 mf 25 volts snap mount. Suitable replacement for 5040-12313-00.
In Stock$6.99 -
#5792-10817-08Connector - IDC red 8 position 8R mt/end8 position Insulation Displacement Connector (IDC)
In Stock$2.29 -
#4701-00004-00Lock washer #10 steel reg split L/W zinc#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
#5792-10773-00Connector 2 position .062 inch terminals2 position receptacle with no mounting ears uses .062 inch crimp terminals.
In Stock$0.29