Filter by Category

RADICAL Pinball GX141

Bally RADICAL Pinball Machine

The following parts are also known to work in RADICAL Pinball GX141 .

Sort by:

Page size:

1 2 3 4 5 6 7 8 9 10

-LED - SCARED STIFF Crate

LED - SCARED STIFF Crate

Red small LED used on Bally SCARED STIFF pinball machine crate. Crate...

-E-clip for 3/8 inch shaft - ball shooter rod

E-clip for 3/8 inch shaft - ball shooter rod

Fits shaft diameter of 3/8 inch with grove diameter of 5/16 inch.

-Link - ball return 1A-4251

Link - ball return 1A-4251

Fiber link for ball return assembly.

-Spring - compression

Spring - compression

Compression spring.

-Machine Screw 10-32 x 5/8" sl-bnd-hd-brass

Machine Screw 10-32 x 5/8" sl-bnd-hd-brass

Brass slotted machine screw 10-32 thread 5/8" long.

-Switch - single switch replacement

Switch - single switch replacement

Replacement single switch. Double pole, 100 volt 5 amp push button switch...

-Wire form & bracket assembly

Wire form & bracket assembly

Wire form & bracket assembly. Reference: A-8645

-Foam rubber strip 3/4 wide x 1/4 thick per inch

Foam rubber strip 3/4 wide x 1/4 thick per inch

Foam rubber strip 3/4 wide x 1/4 thick per inch - black

-Spacer - plastic 1/4 inch black

Spacer - plastic 1/4 inch black

Spacer - plastic 1/4 inch black

-E-clip for 5/16" shaft

E-clip for 5/16" shaft

E-clip or e-ring commonly used on many mechanisms. 5/16" measured at the o...

-Plunger - drop target reset

Plunger - drop target reset

2-1/2" plunger overall length with a 10-32 thread stud

-Drop target reset plate triple

Drop target reset plate triple

Reset plate for 3 bank drop target assembly.

-Cable clamp 1/2 inch diameter single

Cable clamp 1/2 inch diameter single

Cable clamp 1/2 inch diameter single

-Switch - stand-up assembly

Switch - stand-up assembly

Standup switch assembly with bracket. A-4834-H

-Machine Screw 4-40 x 5/8" p-ph-s

Machine Screw 4-40 x 5/8" p-ph-s

Machine screw with 4-40 thread and 5/8" long with phillips pan head

-Connector - IDC green 9 position

Connector - IDC green 9 position

9 position Insulation Displacement Connector (IDC). 22 awg 2...

-Sheet Metal Screw #5 x 5/8 inch p-rh-a

Sheet Metal Screw #5 x 5/8 inch p-rh-a

#5 sheet metal screw 5/8 inch long is used to secure EOS on flipper assemblies...

-Battery 1.5v "AA" alkaline

Battery 1.5v "AA" alkaline

Battery 1.5v AA alkaline for CPU board memory.

-T Molding - 3/4 inch; wide black - per foot

T Molding - 3/4 inch; wide black - per foot

Black vinyl 3/4 inch wide T-Molding for backbox trim on many pinball machines...

-Washer 0.125 x 0.281 x .032 inch

Washer 0.125 x 0.281 x .032 inch

Washer - zinc plated- 0.125 x .281 x .032 inch rivet back

-Machine Screw 4-40 x 3/8" p-ph

Machine Screw 4-40 x 3/8" p-ph

Machine screw with 4-40 thread and 3/8" long with phillips pan head...

-Yoke metal - pop bumper substitute 01-5492

Yoke metal - pop bumper substitute 01-5492

Yoke metal - pop bumper substitute 01-5492

-IC - 40 pin DIP MPU 2 Mhz 68B09E

IC - 40 pin DIP MPU 2 Mhz 68B09E

68B09E MPU 2 Mhz - 40 pin DIP

-Guide - ball trough return runway

Guide - ball trough return runway

Williams ball return runway Ball Trough Guide.

-Lock washer #10 steel reg split L/W zinc

Lock washer #10 steel reg split L/W zinc

#10 steel split lock washer. Zinc plated.

-Washer 0.265 inch x 0.500 inch x 0.032 inch

Washer 0.265 inch x 0.500 inch x 0.032 inch

Flat washer 0.265 inch x 0.500 inch x 0.032 inch

-Cable - knocker Bally/Williams

Cable - knocker Bally/Williams

Knocker cable Bally/Williams

-Sheet Metal Screw #6 x 1" pl-hwh

Sheet Metal Screw #6 x 1" pl-hwh

The most common sheet metal / wood screw in late model pinball machines. T...

-Nut 8-32 keps

-Clip - Coin mech retainer

Clip - Coin mech retainer

This "hairclip" is used to secure the coin mechanism in the coin door on m...

-Wireform - tilt plumb bob threaded

Wireform - tilt plumb bob threaded

Plumb bob tilt wire is used on many Bally Williams and other machines.

-Switch sub-mini assembly

Switch sub-mini assembly

Sub miniature snap action switch with 3 terminals and custom wireform. Use 12-SMSB and trim actuator as needed.

-Lamp socket - pcb v wedge

Lamp socket - pcb v wedge

Lamp socket for wedge base lamps. Reference: 24-8804

-Bracket - playfied bottom arch support

Bracket - playfied bottom arch support

Bracket - playfied bottom arch support

-Heat Sink Compound - 30 gram syringe

Heat Sink Compound - 30 gram syringe

Heat Sink Compound - 30 gram syringe

-Plunger 2-1/8 inch

Plunger 2-1/8 inch

Plunger 2-1/8 inch. Reference: 02-3407-2 Use A-8050-1

-Connector - IDC red 8 position 8R mt/end

Connector - IDC red 8 position 8R mt/end

8 position Insulation Displacement Connector (IDC)

-Connector 2 position .062 inch terminals

Connector 2 position .062 inch terminals

2 position receptacle with no mounting ears uses .062 inch crimp terminals.

-Washer .141 x .437 x .032 inch

Washer .141 x .437 x .032 inch

Pop bumper yoke Washer .141 x .437 x .032 inch

-Rivet - semi tubular - steel zinc

Rivet - semi tubular - steel zinc

Semi-tubular rivet - 0.122 inch x 0.218 inch 0.187 inch - steel zinc

-Sheet Metal Screw #6 x 3/4" pl-hwh

Sheet Metal Screw #6 x 3/4" pl-hwh

Steel zinc 6 X 3/4 unslotted sheet metal screw.

-Nut 1/4-20 Flangrip

Nut 1/4-20 Flangrip

Nut 1/4-20 Flangrip

-Connector 3 position .093 inch terminals

Connector 3 position .093 inch terminals

3 position receptacle with no ears

-Williams / Bally flipper link bushing

Williams / Bally flipper link bushing

USE 02-4676

Out of Stock

$0.99

-Sheet Metal Screw #6 x 3/8 pl-hwh

Sheet Metal Screw #6 x 3/8 pl-hwh

Sheet metal screw #6 X 3/8" plain hex washer head. Zinc plated steel...

-Lamp socket & bulb assembly

Lamp socket & bulb assembly

Lamp socket with bulb for Williams/Bally pinball machine

-Machine Screw 5-40 x 1/8" p-ph

Machine Screw 5-40 x 1/8" p-ph

Machine screw with 5-40 thread and 1/8" long with phillips pan head...

-Cable clamp holder 1/4" diameter

Cable clamp holder 1/4" diameter

Cable clamp Holder 1/4" diameter

-Shooter gauge cover Williams/Bally

Shooter gauge cover Williams/Bally

Shooter gauge cover Williams/Bally

-Lamp socket & #89 bulb assembly

Lamp socket & #89 bulb assembly

Lamp socket and #89 bulb assembly. Reference: A-8798

-Connector - IDC red 7r mt/end 22/156

Connector - IDC red 7r mt/end 22/156

IDC connector 7r mt/end 22/156

-Cable clamp 3/4 inch diameter single

Cable clamp 3/4 inch diameter single

Cable clamp 3/4 inch diameter single

-Potentiometer & bracket assy 10K ohm

Potentiometer & bracket assy 10K ohm

Potentiometer, 10 K OHMS with bracket. Reference: A-8550-1

-Machine Screw 10-32 x 1/2" p-ph-s

Machine Screw 10-32 x 1/2" p-ph-s

Save 50% on 10 or more pieces.

-Machine Screw 6-32 x 3/8" p-flh

Machine Screw 6-32 x 3/8" p-flh

Flat phillips head machine screw has 6-32 thread and is 3/8" long.

-Armature with drop target reset plate

Armature with drop target reset plate

Plunger and reset plate used on many Bally/Williams pinball machine drop t...

-Sheet Metal Screw #6 x 1/2 inch pl-hwh-a

Sheet Metal Screw #6 x 1/2 inch pl-hwh-a

Sheet Metal Screw #6 x 1/2 inch pl-hwh-a

-Connector male 3p nmt sm .062 inch terminals

Connector male 3p nmt sm .062 inch terminals

3 position plug uses .062 inch crimp terminals.

-Coil bracket with 4 spring hooks & notches

Coil bracket with 4 spring hooks & notches

Coil bracket with 4 spring retainer tabs and 3 notches.

-Ribbon Cable - 20 pin 9 inch

Ribbon Cable - 20 pin 9 inch

Ribbon Cable - 20 pin 9 inch

1 2 3 4 5 6 7 8 9 10