Filter by Category

RADICAL Pinball GX141

Bally RADICAL Pinball Machine

The following parts are also known to work in RADICAL Pinball GX141 .

Sort by:

Page size:

1 2 3 4 5 6 7 8 9 10

-Post - 1-1/4 inch narrow red

Post - 1-1/4 inch narrow red

Post - 1-1/4 inch narrow red

-Nut 6-32 wing - plumb bob wire

Nut 6-32 wing - plumb bob wire

Wing nut with 6-32 thread for plumb bob tilt assembly wire.

-PAL nut 5/8 inch

PAL nut 5/8 inch

This 'PAL' nut. Replaced by 20-9222

-Machine Screw 6-32 x 1/2 inch p-ph-sems

Machine Screw 6-32 x 1/2 inch p-ph-sems

Machine screw with 6-32 thread and 1/2 inch long with phillips pan head

-Post stud #8 x 1-1/2 inch wood screw

Post stud #8 x 1-1/2 inch wood screw

Post stud #8 x 1-1/2 inch wood screw USE 530-5010-01

-Link bushing

Williams / Bally flipper link bushing installed between flipper link and crank.

-Bracket - Coil Retainer

Bracket - Coil Retainer

Coil retainer bracket

-Switch mounting bracket

Switch mounting bracket

Switch Mounting Bracket. Reference: 01-9375

-Insulator - switch fishpaper

Insulator - switch fishpaper

Insulator - switch fishpaper

-Glass playfield bundle

Glass playfield bundle

#660-5001-00-BUNDLE

Glass playfield bundle.

-Switch subminiature with bracket

Switch subminiature with bracket

Sub-miniature switch with wire actuator, diode and bracket assembly...

-2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle

2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle

#60-000001-01-BUNDLE

2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle

-Post - plastic double star clear - 1-1/2 inch tall

Post - plastic double star clear - 1-1/2 inch tall

Post - plastic double star clear- 1-1/2 inch

-Hinge assembly upper insert

Hinge assembly upper insert

Hinge assembly upper insert

-IC - 6 pin DIP opto isolator 4N25

IC - 6 pin DIP opto isolator 4N25

Integrated circuit opto isolator 4N25 NTE3040 SK2040

-Backglass clear 27 x 23-1/2 x 1/8 inch

Backglass clear 27 x 23-1/2 x 1/8 inch

Clear tempered backglass for late model Bally/Williams pinball machines...

-Standoff clip

-Clip - switch vinyl cover

Clip - switch vinyl cover

Clip for vinyl switch covers. Reference: 01-10636

-Connector - IDC orange 7R mt/end 18/156

Connector - IDC orange 7R mt/end 18/156

IDC orange connector 7R mt/end 18/156. Reference: 5792-10818-07

-Capacitor 0.1uf 50v +/-20 axial Z5U

Capacitor 0.1uf 50v +/-20 axial Z5U

Axial capacitor 0.1UF 50v +/-20 axial Z5U temperature coefficient.

-Nut 6-32 keps

Keps nut 6-32 with attached external tooth lockwasher.

-Eject cam arm

-IC socket - 24 pins .600 inch wide

IC socket - 24 pins .600 inch wide

Ddual wipe, 24 pin .6 inch wide body crimp-pin sockets used for EPROMs

-Plug - male 3 position

Plug - male 3 position

3 position plug uses .093" diameter crimp terminals.

Bally logo plate chrome finish

Plastic Bally emblem with mirrored script logo is used on backbox speaker...

-Plunger and link assembly

Plunger and link assembly

Fiber link plunger assembly used in Williams and Bally outhole ball return units.

-Resistor SIP 10 pin 4.7k 9r 10 5%

Resistor SIP 10 pin 4.7k 9r 10 5%

Single inline 10 pin resistor network 4.7k 9r 10 5%

-Trim side channel - 22 inch backglass

Trim side channel - 22 inch backglass

Williams backglass side trim 22 inches long

-Pricing cards USA (2) 3 & 5 ball

Pricing cards USA (2) 3 & 5 ball

Pricing cards for Bally/Williams pinball machines.

-Switch miniature - spinner

Switch miniature - spinner

Miniature snap-action switch. 1-1/2" blade with hole

-Bolt carriage 1/4-20 x 1-1/2" RH black

Bolt carriage 1/4-20 x 1-1/2" RH black

#4320-01123-24B

Carriage bolt has 1/4-20 thread and is 1-1/2" long with a round head and b...

-Williams Coil bracket

Williams Coil bracket

Common knocker coil bracket used in many Williams games.

-Nut 8-32 ESNA/NTM stop nut

Nut 8-32 ESNA/NTM stop nut

Stop nut 8-32 thread.

-Rivet - 1/8 x 1/4 inches nickel

Rivet - 1/8 x 1/4 inches nickel

Rivet - 1/8 x 1/4 inches nickel

-Connector - IDC orange 9 position

Connector - IDC orange 9 position

9 position Insulation Displacement Connector (IDC).

-Outhole kicker arm Williams

Outhole kicker arm Williams

Outhole kicker arm Williams

-Aux power driver unit assembly

Aux power driver unit assembly

Auxiliary power driver unit assembly.

~~$239.99~~ $179.99

-Snap-in standoff #6 x .250 inch black

Snap-in standoff #6 x .250 inch black

Black plastic spacer 0.250" Length

-Machine Screw 6-32 x 3/16" p-ph-sems

Machine Screw 6-32 x 3/16" p-ph-sems

Machine screw with 6-32 thread and 3/16" long with phillips pan head and attached lockwasher.

-Spring plate assembly - left

Spring plate assembly - left

Spring plate assembly for kickout holes. Use with A-6948-L assembly

-IC Socket - 16 pins

IC Socket - 16 pins

16 pin double wipe integrated circuit pcb socket.

-Speaker 5 inch - 4 ohm 7 watt

Speaker 5 inch - 4 ohm 7 watt

5 inch round 4 ohm 7 watt speaker for pinball machines

~~$11.99~~ $8.99

-Connector 2 position .062 inch terminals 045-5107-02

Connector 2 position .062 inch terminals 045-5107-02

2 position connector uses .062 inch crimp terminals.

-Switch sub-mini assembly

Switch sub-mini assembly

Sub miniature snap action switch with 3 terminals and custom wireform actuator

-Machine Screw 2-56 x 3/8 inch p-ph-s

Machine Screw 2-56 x 3/8 inch p-ph-s

Machine screw with 2-56 thread and 3/8 inch long with phillips pan head.

-Washer .265 x .500 x .067 inch

Washer .265 x .500 x .067 inch

Washer 0.265 inch x .500 inch x .067 inch

-T-Nut 8-32 1/4" barrel - 19/32" base

T-Nut 8-32 1/4" barrel - 19/32" base

1/4" tall barrel and 8-32 thread with 19/32"" base or flange.

-Pin-Buddy™ Game Saver Cantraption™ 45° BLUE

Pin-Buddy™ Game Saver Cantraption™ 45° BLUE

#77-PBY-GSK45-B

Pin-Buddy™ Game Saver Cantraption™ 45° BLUE

-Varistor MOV 100V 20 joule

Varistor MOV 100V 20 joule

Varistor MOV 100V 20 joule

-Connector - IDC green 7 position

Connector - IDC green 7 position

Connector - 7 position insulation displacement style with passthrough...

-Potentiometer 10 Kohm

Potentiometer 10 Kohm

Potentiometer 10K ohm volume control

-Pin-Buddy™ Game Saver Cantraption™ 45° RED

Pin-Buddy™ Game Saver Cantraption™ 45° RED

#77-PBY-GSK45-R

Pin-Buddy™ Game Saver Cantraption™ 45° RED

-Cam - flat alternator

Cam - flat alternator

Cam - flat alternator

-Service outlet snap-in three prong WPC s

Service outlet snap-in three prong WPC s

Snap-in service outlet used in WPC games. AC inlet IEC PMT 3P. Fits into...

-Backing plate

Cabinet bolt backing plate used in many Bally/Williams WPC System pinball...

-Wire ball guide rail 1 inch

Wire ball guide rail 1 inch

Wire ball guide rail 1 inch

-E-clip for 7/16 in. shaft

E-clip for 7/16 in. shaft

E-clip or e-ring commonly used on many mechanisms. 7/16 in. measured at the o...

-Bracket - drop target stop

Bracket - drop target stop

Coil stop bracket for target mechanisms.

-Connector 2 position .093" terminals

Connector 2 position .093" terminals

2 position plug with no mounting ears uses .093" crimp terminals.

-Kick crank arm Williams right

Kick crank arm Williams right

Kick crank arm Williams right

1 2 3 4 5 6 7 8 9 10